Re: [PATCH 08/10] arm64: dts: imx8ulp-evk: add spi-nor device support

[Shawn Guo]

On Sun, Jun 25, 2023 at 08:42:36PM +0800, Peng Fan (OSS) wrote:
> From: Han Xu <han.xu@xxxxxxx>
> 
> Add spi-nor support.
> - 8 bit mode for RX/TX.
> - Set the clock rate to 200MHz.
> - add default/sleep pinctrl.
> 
> Co-developed-by: Haibo Chen <haibo.chen@xxxxxxx>
> Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
> Signed-off-by: Han Xu <han.xu@xxxxxxx>
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> ---
>  arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 34 +++++++++++++++++++
>  1 file changed, 34 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> index d66e31cf83fe..e459dc35e469 100644
> --- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> @@ -95,6 +95,23 @@ &cm33 {
>  	status = "okay";
>  };
>  
> +&flexspi2 {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&pinctrl_flexspi2_ptd>;
> +	pinctrl-1 = <&pinctrl_flexspi2_ptd>;
> +	status = "okay";
> +
> +	mx25uw51345gxdi00: flash@0 {
> +		reg = <0>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "jedec,spi-nor";

We usually start the property list with 'compatible'.

Shawn

> +		spi-max-frequency = <200000000>;
> +		spi-tx-bus-width = <8>;
> +		spi-rx-bus-width = <8>;


> +	};
> +};
> +
>  &lpuart5 {
>  	/* console */
>  	pinctrl-names = "default", "sleep";
> @@ -159,6 +176,23 @@ MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43
>  		>;
>  	};
>  
> +	pinctrl_flexspi2_ptd: flexspi2ptdgrp {
> +		fsl,pins = <
> +
> +			MX8ULP_PAD_PTD12__FLEXSPI2_A_SS0_B	0x42
> +			MX8ULP_PAD_PTD13__FLEXSPI2_A_SCLK	0x42
> +			MX8ULP_PAD_PTD14__FLEXSPI2_A_DATA3	0x42
> +			MX8ULP_PAD_PTD15__FLEXSPI2_A_DATA2	0x42
> +			MX8ULP_PAD_PTD16__FLEXSPI2_A_DATA1	0x42
> +			MX8ULP_PAD_PTD17__FLEXSPI2_A_DATA0	0x42
> +			MX8ULP_PAD_PTD18__FLEXSPI2_A_DQS	0x42
> +			MX8ULP_PAD_PTD19__FLEXSPI2_A_DATA7	0x42
> +			MX8ULP_PAD_PTD20__FLEXSPI2_A_DATA6	0x42
> +			MX8ULP_PAD_PTD21__FLEXSPI2_A_DATA5	0x42
> +			MX8ULP_PAD_PTD22__FLEXSPI2_A_DATA4	0x42
> +		>;
> +	};
> +
>  	pinctrl_lpuart5: lpuart5grp {
>  		fsl,pins = <
>  			MX8ULP_PAD_PTF14__LPUART5_TX	0x3
> -- 
> 2.37.1
>