Re: [PATCH v3 4/4] arm64: dts: Add MediaTek MT8188 dts and evaluation board and Makefile

From: Krzysztof Kozlowski
Date: Mon Jul 17 2023 - 15:58:28 EST


On 17/07/2023 14:03, Jason-ch Chen wrote:
> From: jason-ch chen <Jason-ch.Chen@xxxxxxxxxxxx>
>
> MT8188 is a SoC based on 64bit ARMv8 architecture. It contains 6 CA55
> and 2 CA78 cores. MT8188 share many HW IP with MT65xx series.
>
> We add basic chip support for MediaTek MT8188 on evaluation board.
>
> Signed-off-by: jason-ch chen <Jason-ch.Chen@xxxxxxxxxxxx>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt8188-evb.dts | 401 +++++++++
> arch/arm64/boot/dts/mediatek/mt8188.dtsi | 951 ++++++++++++++++++++
> 3 files changed, 1353 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8188.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index c99c3372a4b5..9bd2324259a3 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> new file mode 100644
> index 000000000000..d8906172390e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> @@ -0,0 +1,401 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2023 MediaTek Inc.
> + */
> +/dts-v1/;
> +#include "mt8188.dtsi"
> +#include "mt6359.dtsi"
> +
> +/ {
> + model = "MediaTek MT8188 evaluation board";
> + compatible = "mediatek,mt8188-evb", "mediatek,mt8188";
> +
> + aliases {
> + serial0 = &uart0;
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + i2c2 = &i2c2;
> + i2c3 = &i2c3;
> + i2c4 = &i2c4;
> + i2c5 = &i2c5;
> + i2c6 = &i2c6;
> + mmc0 = &mmc0;
> + };
> +
> + chosen: chosen {
> + stdout-path = "serial0:115200n8";
> + kaslr-seed = <0 0>;

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0x80000000>;
> + };
> +
> + reserved_memory: reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + scp_mem_reserved: scp_mem_region {

No underscores in node names.

> + compatible = "shared-dma-pool";
> + reg = <0 0x50000000 0 0x2900000>;
> + no-map;
> + };
> + };


Best regards,
Krzysztof