[PATCH v3] drm/ssd130x: Fix an oops when attempting to update a disabled plane

[Javier Martinez Canillas]

Geert reports that the following NULL pointer dereference happens for him
after commit 49d7d581ceaf ("drm/ssd130x: Don't allocate buffers on each
plane update"):

    [drm] Initialized ssd130x 1.0.0 20220131 for 0-003c on minor 0
    ssd130x-i2c 0-003c: [drm] surface width(128), height(32), bpp(1)
    and format(R1   little-endian (0x20203152))
    Unable to handle kernel NULL pointer dereference at virtual address 00000000
    Oops [#1]
    CPU: 0 PID: 1 Comm: swapper Not tainted
    6.5.0-rc1-orangecrab-02219-g0a529a1e4bf4 #565
    epc : ssd130x_update_rect.isra.0+0x13c/0x340
     ra : ssd130x_update_rect.isra.0+0x2bc/0x340
    ...
    status: 00000120 badaddr: 00000000 cause: 0000000f
    [<c0303d90>] ssd130x_update_rect.isra.0+0x13c/0x340
    [<c0304200>] ssd130x_primary_plane_helper_atomic_update+0x26c/0x284
    [<c02f8d54>] drm_atomic_helper_commit_planes+0xfc/0x27c
    [<c02f9314>] drm_atomic_helper_commit_tail+0x5c/0xb4
    [<c02f94fc>] commit_tail+0x190/0x1b8
    [<c02f99fc>] drm_atomic_helper_commit+0x194/0x1c0
    [<c02c5d00>] drm_atomic_commit+0xa4/0xe4
    [<c02cce40>] drm_client_modeset_commit_atomic+0x244/0x278
    [<c02ccef0>] drm_client_modeset_commit_locked+0x7c/0x1bc
    [<c02cd064>] drm_client_modeset_commit+0x34/0x64
    [<c0301a78>] __drm_fb_helper_restore_fbdev_mode_unlocked+0xc4/0xe8
    [<c0303424>] drm_fb_helper_set_par+0x38/0x58
    [<c027c410>] fbcon_init+0x294/0x534
    ...

The problem is that fbcon calls fbcon_init() which triggers a DRM modeset
and this leads to drm_atomic_helper_commit_planes() attempting to commit
the atomic state for all planes, even the ones whose CRTC is not enabled.

Since the primary plane buffer is allocated in the encoder .atomic_enable
callback, this happens after that initial modeset commit and leads to the
mentioned NULL pointer dereference.

Fix this by allocating the buffers in the struct drm_plane_helper_funcs
.begin_fb_access callback and free them in to .end_fb_access callback,
instead of doing it when the encoder is enabled.

Fixes: commit 49d7d581ceaf ("drm/ssd130x: Don't allocate buffers on each plane update")
Reported-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Signed-off-by: Javier Martinez Canillas <javierm@xxxxxxxxxx>
---

Changes in v3:
- Move the buffers allocation to the plane helper funcs .begin_fb_access
  and the free to .end_fb_access callbacks.
- Always allocate intermediate buffer because is use in ssd130x_clear_screen().
- Don't allocate the buffers as device managed resources.

Changes in v2:
- Move the buffers allocation to .fb_create instead of preventing atomic
  updates for disable planes.
- Don't allocate the intermediate buffer when using the native R1 format.
- Allocate buffers as device managed resources.

 drivers/gpu/drm/solomon/ssd130x.c | 33 ++++++++++++++++++++++++-------
 1 file changed, 26 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c
index b8c90d507a35..549d78e9985d 100644
--- a/drivers/gpu/drm/solomon/ssd130x.c
+++ b/drivers/gpu/drm/solomon/ssd130x.c
@@ -634,6 +634,30 @@ static int ssd130x_fb_blit_rect(struct drm_framebuffer *fb, const struct iosys_m
 	return ret;
 }
 
+static int ssd130x_primary_plane_helper_begin_fb_access(struct drm_plane *plane,
+							struct drm_plane_state *state)
+{
+	struct drm_device *drm = plane->dev;
+	struct ssd130x_device *ssd130x = drm_to_ssd130x(drm);
+	int ret = ssd130x_buf_alloc(ssd130x);
+
+	if (ret)
+		return ret;
+
+	return drm_gem_begin_shadow_fb_access(plane, state);
+}
+
+static void ssd130x_primary_plane_helper_end_fb_access(struct drm_plane *plane,
+						       struct drm_plane_state *state)
+{
+	struct drm_device *drm = plane->dev;
+	struct ssd130x_device *ssd130x = drm_to_ssd130x(drm);
+
+	ssd130x_buf_free(ssd130x);
+
+	return drm_gem_end_shadow_fb_access(plane, state);
+}
+
 static void ssd130x_primary_plane_helper_atomic_update(struct drm_plane *plane,
 						       struct drm_atomic_state *state)
 {
@@ -678,7 +702,8 @@ static void ssd130x_primary_plane_helper_atomic_disable(struct drm_plane *plane,
 }
 
 static const struct drm_plane_helper_funcs ssd130x_primary_plane_helper_funcs = {
-	DRM_GEM_SHADOW_PLANE_HELPER_FUNCS,
+	.begin_fb_access = ssd130x_primary_plane_helper_begin_fb_access,
+	.end_fb_access = ssd130x_primary_plane_helper_end_fb_access,
 	.atomic_check = drm_plane_helper_atomic_check,
 	.atomic_update = ssd130x_primary_plane_helper_atomic_update,
 	.atomic_disable = ssd130x_primary_plane_helper_atomic_disable,
@@ -741,10 +766,6 @@ static void ssd130x_encoder_helper_atomic_enable(struct drm_encoder *encoder,
 	if (ret)
 		goto power_off;
 
-	ret = ssd130x_buf_alloc(ssd130x);
-	if (ret)
-		goto power_off;
-
 	ssd130x_write_cmd(ssd130x, 1, SSD130X_DISPLAY_ON);
 
 	backlight_enable(ssd130x->bl_dev);
@@ -766,8 +787,6 @@ static void ssd130x_encoder_helper_atomic_disable(struct drm_encoder *encoder,
 
 	ssd130x_write_cmd(ssd130x, 1, SSD130X_DISPLAY_OFF);
 
-	ssd130x_buf_free(ssd130x);
-
 	ssd130x_power_off(ssd130x);
 }
 
-- 
2.41.0

-- 
Best regards,

Javier Martinez Canillas
Core Platforms
Red Hat