Re: [PATCH v3 5/5] thermal/drivers/tsens: Add IPQ5332 support

[Praveenkumar I]

On 7/15/2023 7:36 PM, Konrad Dybcio wrote:
> On 13.07.2023 07:27, Praveenkumar I wrote:
> > IPQ5332 uses tsens v2.3.3 IP and it is having combined interrupt.
> > It does not have RPM and kernel needs to take care of sensor
> > enablement, calibration. Hence introduced new feature_config,
> > ops and data for IPQ5332.
> >
> > Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
> > ---
> > [v3]:
> > 	No changes.
> > [v2]:
> > 	Added tsens_features for ipq5332 with VER_2_X_NO_RPM. Used
> > 	hw_ids to mention the available sensors. Dropped v2 in
> > 	ops_ipq5332.
> >
> >   drivers/thermal/qcom/tsens-v2.c | 25 +++++++++++++++++++++++++
> >   drivers/thermal/qcom/tsens.c    |  3 +++
> >   drivers/thermal/qcom/tsens.h    |  2 +-
> >   3 files changed, 29 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
> > index 781595a9a622..e25d9d34e519 100644
> > --- a/drivers/thermal/qcom/tsens-v2.c
> > +++ b/drivers/thermal/qcom/tsens-v2.c
> > @@ -62,6 +62,17 @@ static struct tsens_features ipq8074_feat = {
> >   	.trip_max_temp	= 204000,
> >   };
> >   
> > +static struct tsens_features ipq5332_feat = {
> > +	.ver_major	= VER_2_X_NO_RPM,
> > +	.crit_int	= 1,
> > +	.combo_int	= 1,
> > +	.adc		= 0,
> > +	.srot_split	= 1,
> > +	.max_sensors	= 16,
> > +	.trip_min_temp	= 0,
> > +	.trip_max_temp	= 204000,
> 204 degrees Celcius?
Yes, it is 204 degrees celcius as like ipq8074.
> Konrad
> > +};
> > +
> >   static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
> >   	/* ----- SROT ------ */
> >   	/* VERSION */
> > @@ -262,6 +273,20 @@ struct tsens_plat_data data_ipq8074 = {
> >   	.fields	= tsens_v2_regfields,
> >   };
> >   
> > +static const struct tsens_ops ops_ipq5332 = {
> > +	.init		= init_tsens_v2_no_rpm,
> > +	.get_temp	= get_temp_tsens_valid,
> > +	.calibrate	= tsens_v2_calibration,
> > +};
> > +
> > +struct tsens_plat_data data_ipq5332 = {
> > +	.num_sensors	= 5,
> > +	.ops		= &ops_ipq5332,
> > +	.hw_ids		= (unsigned int []){11, 12, 13, 14, 15},
> > +	.feat		= &ipq5332_feat,
> > +	.fields		= tsens_v2_regfields,
> > +};
> > +
> >   /* Kept around for backward compatibility with old msm8996.dtsi */
> >   struct tsens_plat_data data_8996 = {
> >   	.num_sensors	= 13,
> > diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> > index 9dc0c2150948..af58a94628a8 100644
> > --- a/drivers/thermal/qcom/tsens.c
> > +++ b/drivers/thermal/qcom/tsens.c
> > @@ -1106,6 +1106,9 @@ static const struct of_device_id tsens_table[] = {
> >   	}, {
> >   		.compatible = "qcom,ipq8074-tsens",
> >   		.data = &data_ipq8074,
> > +	}, {
> > +		.compatible = "qcom,ipq5332-tsens",
> > +		.data = &data_ipq5332,
> >   	}, {
> >   		.compatible = "qcom,mdm9607-tsens",
> >   		.data = &data_9607,
> > diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> > index b2e8f0f2b466..1dde363914cd 100644
> > --- a/drivers/thermal/qcom/tsens.h
> > +++ b/drivers/thermal/qcom/tsens.h
> > @@ -648,6 +648,6 @@ extern struct tsens_plat_data data_8226, data_8909, data_8916, data_8939, data_8
> >   extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
> >   
> >   /* TSENS v2 targets */
> > -extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;
> > +extern struct tsens_plat_data data_8996, data_ipq8074, data_ipq5332, data_tsens_v2;
> >   
> >   #endif /* __QCOM_TSENS_H__ */