Re: [PATCH v4 1/2] dt-bindings: net: motorcomm: Add pad driver strength cfg

[Andrew Lunn]

> +  motorcomm,rx-clk-driver-strength:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      drive strength of rx_clk rgmii pad.
> +      |----------------------------------|
> +      |        rx_clk ds map table       |
> +      |----------------------------------|
> +      | DS(3b) |  wol@1.8v  |  wol@3.3v  |
> +      |________|_________________________|
> +      |        | current(uA)| current(uA)|
> +      |   000  |     1200   |    3070    |
> +      |   001  |     2100   |    4080    |
> +      |   010  |     2700   |    4370    |
> +      |   011  |     2910   |    4680    |
> +      |   100  |     3110   |    5020    |
> +      |   101  |     3600   |    5450    |
> +      |   110  |     3970   |    5740    |
> +      |   111  |     4350   |    6140    |
> +      |--------|------------|------------|
> +    enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970,
> +            4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ]
> +    default: 2910

The DS(3b) value is not relevant to the binding. It is a driver
detail. So i would not bother listing it.

Please add a comment explaining what wol is. 

       Andrew