Re: [PATCH v4 2/2] irqchip/loongson-eiointc: Simplify irq routing on some platforms

[bibo mao]

在 2023/7/14 11:01, Huacai Chen 写道:
> Hi, Bibo,
> 
> On Thu, Jul 13, 2023 at 11:23 AM Bibo Mao <maobibo@xxxxxxxxxxx> wrote:
>>
>> Some LoongArch systems have only one eiointc node such as 3A5000/2K2000
>> and qemu virt-machine. If there is only one eiointc node, all cpus can
>> access eiointc registers directly; if there is multiple eiointc nodes, each
>> cpu can only access eiointc belonging to specified node group, so anysend
>> or ipi needs to be used to configure irq routing. IRQ routing is simple on
>> such systems with one node, hacking method like anysend is not necessary.
>>
>> This patch provides simpile IRQ routing method for systems with one eiointc
>> node, and is tested on 3A5000 board and qemu virt-machine.
>>
>> Signed-off-by: Bibo Mao <maobibo@xxxxxxxxxxx>
>> ---
>>  drivers/irqchip/irq-loongson-eiointc.c | 80 ++++++++++++++++++++++++--
>>  1 file changed, 74 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/irqchip/irq-loongson-eiointc.c b/drivers/irqchip/irq-loongson-eiointc.c
>> index 603d323b8f8b..e6be9d6a18c8 100644
>> --- a/drivers/irqchip/irq-loongson-eiointc.c
>> +++ b/drivers/irqchip/irq-loongson-eiointc.c
>> @@ -127,6 +127,48 @@ static int eiointc_set_irq_affinity(struct irq_data *d, const struct cpumask *af
>>         return IRQ_SET_MASK_OK;
>>  }
>>
>> +static int eiointc_single_set_irq_affinity(struct irq_data *d,
>> +                               const struct cpumask *affinity, bool force)
>> +{
>> +       unsigned int cpu;
>> +       unsigned long flags;
>> +       uint32_t vector, regaddr, data, coremap;
>> +       struct cpumask mask;
>> +       struct eiointc_priv *priv = d->domain->host_data;
>> +
>> +       cpumask_and(&mask, affinity, cpu_online_mask);
>> +       cpumask_and(&mask, &mask, &priv->cpuspan_map);
>> +       if (cpumask_empty(&mask))
>> +               return -EINVAL;
>> +
>> +       cpu = cpumask_first(&mask);
>> +       vector = d->hwirq;
>> +       regaddr = EIOINTC_REG_ENABLE + ((vector >> 5) << 2);
>> +       data = ~BIT(vector & 0x1F);
>> +       coremap = BIT(cpu_logical_map(cpu) % CORES_PER_EIO_NODE);
>> +
>> +       /*
>> +        * simplify for platform with only one eiointc node
>> +        * access eiointc registers directly rather than
>> +        * use any_send method here
>> +        */
>> +       raw_spin_lock_irqsave(&affinity_lock, flags);
>> +       iocsr_write32(EIOINTC_ALL_ENABLE & data, regaddr);
>> +       /*
>> +        * get irq route info for continuous 4 vectors
>> +        * and set affinity for specified vector
>> +        */
>> +       data = iocsr_read32(EIOINTC_REG_ROUTE + (vector & ~3));
>> +       data &=  ~(0xff << ((vector & 3) * 8));
>> +       data |= coremap << ((vector & 3) * 8);
>> +       iocsr_write32(data, EIOINTC_REG_ROUTE + (vector & ~3));
>> +       iocsr_write32(EIOINTC_ALL_ENABLE, regaddr);
>> +       raw_spin_unlock_irqrestore(&affinity_lock, flags);
>> +
>> +       irq_data_update_effective_affinity(d, cpumask_of(cpu));
>> +       return IRQ_SET_MASK_OK;
>> +}
>> +
>>  static int eiointc_index(int node)
>>  {
>>         int i;
>> @@ -238,22 +280,39 @@ static struct irq_chip eiointc_irq_chip = {
>>         .irq_set_affinity       = eiointc_set_irq_affinity,
>>  };
>>
>> +static struct irq_chip eiointc_irq_chipi_single = {
> What does "chipi" mean? Maybe "chip"?
it is a typo, it should chip.

> 
> And from my point of view, the main goal of this patch is to add
> "virtual eiointc" support which is different from "real eiointc". So I
> think it is better to not touch the "real eiointc" logic, but add a
> variant for "virtual eiointc", and then, the name should be
> "EIOINTC-V", not "EIOINTC-S".
it is not for virt-machine only, it is ok for 3A5000 and embedded boards also.

If it is possible to add special eiointc for virt-machine, irq should be routed
to all vcpus rather than only vcpu 0-3 for virt eiointc model.

Regards
Bibo Mao
Only server h
> 
> Huacai
> 
>> +       .name                   = "EIOINTC-S",
>> +       .irq_ack                = eiointc_ack_irq,
>> +       .irq_mask               = eiointc_mask_irq,
>> +       .irq_unmask             = eiointc_unmask_irq,
>> +#ifdef CONFIG_SMP
>> +       .irq_set_affinity       = eiointc_single_set_irq_affinity,
>> +#endif
>> +};
>> +
>>  static int eiointc_domain_alloc(struct irq_domain *domain, unsigned int virq,
>>                                 unsigned int nr_irqs, void *arg)
>>  {
>>         int ret;
>>         unsigned int i, type;
>>         unsigned long hwirq = 0;
>> -       struct eiointc *priv = domain->host_data;
>> +       struct eiointc_priv *priv = domain->host_data;
>> +       struct irq_chip *chip;
>>
>>         ret = irq_domain_translate_onecell(domain, arg, &hwirq, &type);
>>         if (ret)
>>                 return ret;
>>
>> -       for (i = 0; i < nr_irqs; i++) {
>> -               irq_domain_set_info(domain, virq + i, hwirq + i, &eiointc_irq_chip,
>> +       /*
>> +        * use simple irq routing method on single eiointc node
>> +        */
>> +       if ((nr_pics == 1) && (nodes_weight(priv->node_map) == 1))
>> +               chip = &eiointc_irq_chipi_single;
>> +       else
>> +               chip = &eiointc_irq_chip;
>> +       for (i = 0; i < nr_irqs; i++)
>> +               irq_domain_set_info(domain, virq + i, hwirq + i, chip,
>>                                         priv, handle_edge_irq, NULL, NULL);
>> -       }
>>
>>         return 0;
>>  }
>> @@ -310,6 +369,7 @@ static void eiointc_resume(void)
>>         int i, j;
>>         struct irq_desc *desc;
>>         struct irq_data *irq_data;
>> +       struct irq_chip *chip;
>>
>>         eiointc_router_init(0);
>>
>> @@ -319,7 +379,8 @@ static void eiointc_resume(void)
>>                         if (desc && desc->handle_irq && desc->handle_irq != handle_bad_irq) {
>>                                 raw_spin_lock(&desc->lock);
>>                                 irq_data = irq_domain_get_irq_data(eiointc_priv[i]->eiointc_domain, irq_desc_get_irq(desc));
>> -                               eiointc_set_irq_affinity(irq_data, irq_data->common->affinity, 0);
>> +                               chip = irq_data_get_irq_chip(irq_data);
>> +                               chip->irq_set_affinity(irq_data, irq_data->common->affinity, 0);
>>                                 raw_spin_unlock(&desc->lock);
>>                         }
>>                 }
>> @@ -497,7 +558,14 @@ static int __init eiointc_of_init(struct device_node *of_node,
>>         priv->node = 0;
>>         priv->domain_handle = of_node_to_fwnode(of_node);
>>
>> -       ret = eiointc_init(priv, parent_irq, 0);
>> +       /*
>> +        * 2k0500 and 2k2000 has only one eiointc node
>> +        * set nodemap as 1 for simple irq routing
>> +        *
>> +        * Fixme: what about future embedded boards with more than 4 cpus?
>> +        * nodemap and node need be added in dts like acpi table
>> +        */
>> +       ret = eiointc_init(priv, parent_irq, 1);
>>         if (ret < 0)
>>                 goto out_free_priv;
>>
>> --
>> 2.27.0
>>