[PATCH v2] mmc: renesas_sdhi: register irqs before registering controller

[Wolfram Sang]

IRQs should be ready to serve when we call mmc_add_host() via
tmio_mmc_host_probe(). To achieve that, ensure that all irqs are masked
before registering the handlers.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Tested-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---

Additionally tested on a Renesas Ebisu board (R-Car E3).

Changes since v1:
* refactored setting sdcard_irq_mask_all (Thanks Geert!)
* added tag

 drivers/mmc/host/renesas_sdhi_core.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index 345934e4f59e..2d5ef9c37d76 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -1006,6 +1006,8 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 		host->sdcard_irq_setbit_mask = TMIO_STAT_ALWAYS_SET_27;
 		host->sdcard_irq_mask_all = TMIO_MASK_ALL_RCAR2;
 		host->reset = renesas_sdhi_reset;
+	} else {
+		host->sdcard_irq_mask_all = TMIO_MASK_ALL;
 	}
 
 	/* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */
@@ -1100,9 +1102,7 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 		host->ops.hs400_complete = renesas_sdhi_hs400_complete;
 	}
 
-	ret = tmio_mmc_host_probe(host);
-	if (ret < 0)
-		goto edisclk;
+	sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask_all);
 
 	num_irqs = platform_irq_count(pdev);
 	if (num_irqs < 0) {
@@ -1129,6 +1129,10 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 			goto eirq;
 	}
 
+	ret = tmio_mmc_host_probe(host);
+	if (ret < 0)
+		goto edisclk;
+
 	dev_info(&pdev->dev, "%s base at %pa, max clock rate %u MHz\n",
 		 mmc_hostname(host->mmc), &res->start, host->mmc->f_max / 1000000);
 
-- 
2.30.2