[PATCH] dt-bindings: serial: Remove obsolete nxp,lpc1850-uart.txt

[Rob Herring]

nxp,lpc1850-uart.txt binding is already covered by 8250.yaml, so remove
it.

Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../bindings/serial/nxp,lpc1850-uart.txt      | 28 -------------------
 1 file changed, 28 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt

diff --git a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
deleted file mode 100644
index 04e23e63ee4f..000000000000
--- a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* NXP LPC1850 UART
-
-Required properties:
-- compatible	: "nxp,lpc1850-uart", "ns16550a".
-- reg		: offset and length of the register set for the device.
-- interrupts	: should contain uart interrupt.
-- clocks	: phandle to the input clocks.
-- clock-names	: required elements: "uartclk", "reg".
-
-Optional properties:
-- dmas		: Two or more DMA channel specifiers following the
-		  convention outlined in bindings/dma/dma.txt
-- dma-names	: Names for the dma channels, if present. There must
-		  be at least one channel named "tx" for transmit
-		  and named "rx" for receive.
-
-Since it's also possible to also use the of_serial.c driver all
-parameters from 8250.txt also apply but are optional.
-
-Example:
-uart0: serial@40081000 {
-	compatible = "nxp,lpc1850-uart", "ns16550a";
-	reg = <0x40081000 0x1000>;
-	reg-shift = <2>;
-	interrupts = <24>;
-	clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
-	clock-names = "uartclk", "reg";
-};
-- 
2.40.1