Re: [PATCH v6 3/3] ublk: enable zoned storage support

From: Andreas Hindborg (Samsung)
Date: Fri Jul 07 2023 - 04:04:56 EST

Next message: kah . jing . lee: "[PATCH 2/2 RESEND] firmware: stratix10-rsu: query spt addresses"
Previous message: kah . jing . lee: "[PATCH 1/2 RESEND] firmware: stratix10-svc: Generic Mailbox Command"
In reply to: Damien Le Moal: "Re: [PATCH v6 3/3] ublk: enable zoned storage support"
Next in thread: Ming Lei: "Re: [PATCH v6 3/3] ublk: enable zoned storage support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Damien Le Moal <dlemoal@xxxxxxxxxx> writes:

> On 7/6/23 22:09, Andreas Hindborg wrote:
>> From: Andreas Hindborg <a.hindborg@xxxxxxxxxxx>
>>
>> Add zoned storage support to ublk: report_zones and operations:
>> - REQ_OP_ZONE_OPEN
>> - REQ_OP_ZONE_CLOSE
>> - REQ_OP_ZONE_FINISH
>> - REQ_OP_ZONE_RESET
>> - REQ_OP_ZONE_APPEND
>>
>> The zone append feature uses the `addr` field of `struct ublksrv_io_cmd` to
>> communicate ALBA back to the kernel. Therefore ublk must be used with the
>> user copy feature (UBLK_F_USER_COPY) for zoned storage support to be
>> available. Without this feature, ublk will not allow zoned storage support.
>>
>> Signed-off-by: Andreas Hindborg <a.hindborg@xxxxxxxxxxx>
>> ---
>> drivers/block/Kconfig | 4 +
>> drivers/block/ublk_drv.c | 341 ++++++++++++++++++++++++++++++++--
>> include/uapi/linux/ublk_cmd.h | 30 +++
>> 3 files changed, 363 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
>> index 5b9d4aaebb81..3f7bedae8511 100644
>> --- a/drivers/block/Kconfig
>> +++ b/drivers/block/Kconfig
>> @@ -373,6 +373,7 @@ config BLK_DEV_RBD
>> config BLK_DEV_UBLK
>> tristate "Userspace block driver (Experimental)"
>> select IO_URING
>> + select BLK_DEV_UBLK_ZONED if BLK_DEV_ZONED
>
> You are not adding a new file anymore. So I do not see the point of
> this. You can directly use "#if[n]def CONFIG_BLK_DEV_ZONED".
>
>> help
>> io_uring based userspace block driver. Together with ublk server, ublk
>> has been working well, but interface with userspace or command data
>> @@ -402,6 +403,9 @@ config BLKDEV_UBLK_LEGACY_OPCODES
>> suggested to enable N if your application(ublk server) switches to
>> ioctl command encoding.
>>
>> +config BLK_DEV_UBLK_ZONED
>> + bool
>
> See above. Not needed.
>

Agreed 👍

>> +
>> source "drivers/block/rnbd/Kconfig"
>>
>> endif # BLK_DEV
>> diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
>> index 8d271901efac..a5adcfc976a5 100644
>> --- a/drivers/block/ublk_drv.c
>> +++ b/drivers/block/ublk_drv.c
>> @@ -56,22 +56,28 @@
>> | UBLK_F_USER_RECOVERY_REISSUE \
>> | UBLK_F_UNPRIVILEGED_DEV \
>> | UBLK_F_CMD_IOCTL_ENCODE \
>> - | UBLK_F_USER_COPY)
>> + | UBLK_F_USER_COPY \
>> + | UBLK_F_ZONED)
>>
>> /* All UBLK_PARAM_TYPE_* should be included here */
>> -#define UBLK_PARAM_TYPE_ALL (UBLK_PARAM_TYPE_BASIC | \
>> - UBLK_PARAM_TYPE_DISCARD | UBLK_PARAM_TYPE_DEVT)
>> +#define UBLK_PARAM_TYPE_ALL \
>> + (UBLK_PARAM_TYPE_BASIC | UBLK_PARAM_TYPE_DISCARD | \
>> + UBLK_PARAM_TYPE_DEVT | UBLK_PARAM_TYPE_ZONED)
>>
>> struct ublk_rq_data {
>> struct llist_node node;
>>
>> struct kref ref;
>> + __u32 operation;
>> + __u64 sector;
>> + __u32 nr_sectors;
>> };
>>
>> struct ublk_uring_cmd_pdu {
>> struct ublk_queue *ubq;
>> };
>>
>> +
>> /*
>> * io command is active: sqe cmd is received, and its cqe isn't done
>> *
>> @@ -110,6 +116,11 @@ struct ublk_uring_cmd_pdu {
>> */
>> #define UBLK_IO_FLAG_NEED_GET_DATA 0x08
>>
>> +/*
>> + * Set when IO is Zone Append
>> + */
>> +#define UBLK_IO_FLAG_ZONE_APPEND 0x10
>> +
>> struct ublk_io {
>> /* userspace buffer address from io cmd */
>> __u64 addr;
>> @@ -184,6 +195,31 @@ struct ublk_params_header {
>> __u32 len;
>> __u32 types;
>> };
>
> A blank line here would be nice.
>
>> +static inline int ublk_dev_params_zoned(const struct ublk_device *ub)
>> +{
>> + return ub->params.types & UBLK_PARAM_TYPE_ZONED;
>> +}
>> +
>> +static inline bool ublk_dev_is_zoned(const struct ublk_device *ub)
>> +{
>> + return ub->dev_info.flags & UBLK_F_ZONED;
>> +}
>> +
>> +static int ublk_set_nr_zones(struct ublk_device *ub);
>> +static int ublk_dev_param_zoned_validate(const struct ublk_device *ub);
>> +static int ublk_dev_param_zoned_apply(struct ublk_device *ub);
>> +static int ublk_revalidate_disk_zones(struct ublk_device *ub);
>> +
>> +#ifndef CONFIG_BLK_DEV_UBLK_ZONED
>> +
>> +#define ublk_report_zones (NULL)
>> +
>> +#else
>> +
>> +static int ublk_report_zones(struct gendisk *disk, sector_t sector,
>> + unsigned int nr_zones, report_zones_cb cb, void *data);
>> +
>> +#endif
>>
>> static inline bool ublk_dev_is_user_copy(const struct ublk_device *ub)
>> {
>> @@ -232,7 +268,7 @@ static inline unsigned ublk_pos_to_tag(loff_t pos)
>> UBLK_TAG_BITS_MASK;
>> }
>>
>> -static void ublk_dev_param_basic_apply(struct ublk_device *ub)
>> +static int ublk_dev_param_basic_apply(struct ublk_device *ub)
>> {
>> struct request_queue *q = ub->ub_disk->queue;
>> const struct ublk_param_basic *p = &ub->params.basic;
>> @@ -257,6 +293,11 @@ static void ublk_dev_param_basic_apply(struct ublk_device *ub)
>> set_disk_ro(ub->ub_disk, true);
>>
>> set_capacity(ub->ub_disk, p->dev_sectors);
>> +
>> + if (ublk_dev_is_zoned(ub))
>> + return ublk_set_nr_zones(ub);
>> +
>> + return 0;
>> }
>>
>> static void ublk_dev_param_discard_apply(struct ublk_device *ub)
>> @@ -286,6 +327,9 @@ static int ublk_validate_params(const struct ublk_device *ub)
>>
>> if (p->max_sectors > (ub->dev_info.max_io_buf_bytes >> 9))
>> return -EINVAL;
>> +
>> + if (ublk_dev_is_zoned(ub) && !p->chunk_sectors)
>> + return -EINVAL;
>> } else
>> return -EINVAL;
>>
>> @@ -304,19 +348,26 @@ static int ublk_validate_params(const struct ublk_device *ub)
>> if (ub->params.types & UBLK_PARAM_TYPE_DEVT)
>> return -EINVAL;
>>
>> - return 0;
>> + return ublk_dev_param_zoned_validate(ub);
>> }
>>
>> static int ublk_apply_params(struct ublk_device *ub)
>> {
>> + int ret;
>> +
>> if (!(ub->params.types & UBLK_PARAM_TYPE_BASIC))
>> return -EINVAL;
>>
>> - ublk_dev_param_basic_apply(ub);
>> + ret = ublk_dev_param_basic_apply(ub);
>> + if (ret)
>> + return ret;
>>
>> if (ub->params.types & UBLK_PARAM_TYPE_DISCARD)
>> ublk_dev_param_discard_apply(ub);
>>
>> + if (ublk_dev_params_zoned(ub))
>> + return ublk_dev_param_zoned_apply(ub);
>> +
>> return 0;
>> }
>>
>> @@ -487,6 +538,7 @@ static const struct block_device_operations ub_fops = {
>> .owner = THIS_MODULE,
>> .open = ublk_open,
>> .free_disk = ublk_free_disk,
>> + .report_zones = ublk_report_zones,
>> };
>>
>> #define UBLK_MAX_PIN_PAGES 32
>> @@ -601,7 +653,8 @@ static inline bool ublk_need_map_req(const struct request *req)
>>
>> static inline bool ublk_need_unmap_req(const struct request *req)
>> {
>> - return ublk_rq_has_data(req) && req_op(req) == REQ_OP_READ;
>> + return ublk_rq_has_data(req) &&
>> + (req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_DRV_IN);
>> }
>>
>> static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req,
>> @@ -685,6 +738,7 @@ static blk_status_t ublk_setup_iod(struct ublk_queue *ubq, struct request *req)
>> {
>> struct ublksrv_io_desc *iod = ublk_get_iod(ubq, req->tag);
>> struct ublk_io *io = &ubq->ios[req->tag];
>> + struct ublk_rq_data *pdu = blk_mq_rq_to_pdu(req);
>> u32 ublk_op;
>>
>> switch (req_op(req)) {
>> @@ -703,6 +757,37 @@ static blk_status_t ublk_setup_iod(struct ublk_queue *ubq, struct request *req)
>> case REQ_OP_WRITE_ZEROES:
>> ublk_op = UBLK_IO_OP_WRITE_ZEROES;
>> break;
>> + case REQ_OP_ZONE_OPEN:
>> + ublk_op = UBLK_IO_OP_ZONE_OPEN;
>> + break;
>> + case REQ_OP_ZONE_CLOSE:
>> + ublk_op = UBLK_IO_OP_ZONE_CLOSE;
>> + break;
>> + case REQ_OP_ZONE_FINISH:
>> + ublk_op = UBLK_IO_OP_ZONE_FINISH;
>> + break;
>> + case REQ_OP_ZONE_RESET:
>> + ublk_op = UBLK_IO_OP_ZONE_RESET;
>> + break;
>> + case REQ_OP_DRV_IN:
>> + ublk_op = pdu->operation;
>> + switch (ublk_op) {
>> + case UBLK_IO_OP_REPORT_ZONES:
>> + iod->op_flags = ublk_op | ublk_req_build_flags(req);
>> + iod->nr_sectors = pdu->nr_sectors;
>> + iod->start_sector = pdu->sector;
>> + return BLK_STS_OK;
>> + default:
>> + return BLK_STS_IOERR;
>> + }
>> + case REQ_OP_ZONE_APPEND:
>> + ublk_op = UBLK_IO_OP_ZONE_APPEND;
>> + io->flags |= UBLK_IO_FLAG_ZONE_APPEND;
>> + break;
>> + case REQ_OP_ZONE_RESET_ALL:
>> + case REQ_OP_DRV_OUT:
>> + /* We do not support reset_all and drv_out */
>> + fallthrough;
>
> It would be nice to check that zone operations are attempted only on
> zoned drives. Something like:
>
> if (!ublk_dev_is_zoned(ub) &&
> (op_is_zone_mgmt(op) || op == REQ_OP_ZONE_APPEND))
> return -EIO;
>
> before the switch-case maybe ?

Sure 👍

>
>> default:
>> return BLK_STS_IOERR;
>> }
>> @@ -756,7 +841,8 @@ static inline void __ublk_complete_rq(struct request *req)
>> *
>> * Both the two needn't unmap.
>> */
>> - if (req_op(req) != REQ_OP_READ && req_op(req) != REQ_OP_WRITE)
>> + if (req_op(req) != REQ_OP_READ && req_op(req) != REQ_OP_WRITE &&
>> + req_op(req) != REQ_OP_DRV_IN)
>> goto exit;
>>
>> /* for READ request, writing data in iod->addr to rq buffers */
>> @@ -1120,6 +1206,11 @@ static void ublk_commit_completion(struct ublk_device *ub,
>> /* find the io request and complete */
>> req = blk_mq_tag_to_rq(ub->tag_set.tags[qid], tag);
>>
>> + if (io->flags & UBLK_IO_FLAG_ZONE_APPEND) {
>> + req->__sector = ub_cmd->addr;
>> + io->flags &= ~UBLK_IO_FLAG_ZONE_APPEND;
>> + }
>> +
>> if (req && likely(!blk_should_fake_timeout(req->q)))
>> ublk_put_req_ref(ubq, req);
>> }
>> @@ -1419,7 +1510,8 @@ static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
>> ^ (_IOC_NR(cmd_op) == UBLK_IO_NEED_GET_DATA))
>> goto out;
>>
>> - if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
>> + if (ublk_support_user_copy(ubq) &&
>> + !(io->flags & UBLK_IO_FLAG_ZONE_APPEND) && ub_cmd->addr) {
>> ret = -EINVAL;
>> goto out;
>> }
>> @@ -1542,11 +1634,14 @@ static inline bool ublk_check_ubuf_dir(const struct request *req,
>> int ubuf_dir)
>> {
>> /* copy ubuf to request pages */
>> - if (req_op(req) == REQ_OP_READ && ubuf_dir == ITER_SOURCE)
>> + if ((req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_DRV_IN) &&
>> + ubuf_dir == ITER_SOURCE)
>> return true;
>>
>> /* copy request pages to ubuf */
>> - if (req_op(req) == REQ_OP_WRITE && ubuf_dir == ITER_DEST)
>> + if ((req_op(req) == REQ_OP_WRITE ||
>> + req_op(req) == REQ_OP_ZONE_APPEND) &&
>> + ubuf_dir == ITER_DEST)
>> return true;
>>
>> return false;
>> @@ -1883,8 +1978,12 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
>> if (ub->nr_privileged_daemon != ub->nr_queues_ready)
>> set_bit(GD_SUPPRESS_PART_SCAN, &disk->state);
>>
>> - get_device(&ub->cdev_dev);
>
> Why move this ? Isn't it better to do the revalidate while holding a ref
> on the device to avoid racies with remove ?
>
>> ub->dev_info.state = UBLK_S_DEV_LIVE;
>> + ret = ublk_revalidate_disk_zones(ub);
>> + if (ret)
>> + goto out_put_disk;
>
> No need to clear the LIVE flag ?

Yes, will rework this a bit, thanks.

>
>> +
>> + get_device(&ub->cdev_dev);
>> ret = add_disk(disk);
>> if (ret) {
>> /*
>> @@ -2045,6 +2144,13 @@ static int ublk_ctrl_add_dev(struct io_uring_cmd *cmd)
>> if (ublk_dev_is_user_copy(ub))
>> ub->dev_info.flags &= ~UBLK_F_NEED_GET_DATA;
>>
>> + /* Zoned storage support requires user copy feature */
>> + if (ublk_dev_is_zoned(ub) &&
>> + (!IS_ENABLED(CONFIG_BLK_DEV_UBLK_ZONED) || !ublk_dev_is_user_copy(ub))) {
>
> See top comment. Use CONFIG_BLK_DEV_ZONED directly.
>
>> + ret = -EINVAL;
>> + goto out_free_dev_number;
>> + }
>> +
>> /* We are not ready to support zero copy */
>> ub->dev_info.flags &= ~UBLK_F_SUPPORT_ZERO_COPY;
>>
>> @@ -2629,3 +2735,214 @@ MODULE_PARM_DESC(ublks_max, "max number of ublk devices allowed to add(default:
>>
>> MODULE_AUTHOR("Ming Lei <ming.lei@xxxxxxxxxx>");
>> MODULE_LICENSE("GPL");
>> +
>> +#ifdef CONFIG_BLK_DEV_UBLK_ZONED
>
> Why put these at the end ? Code after the MODULE_XXX() macros is rather
> unusual. If you move all this at the top, you can likely avoid the
> forward declarations as well.

Alright

>
>> +
>> +static int get_nr_zones(const struct ublk_device *ub)
>
> ublk_get_nr_zones() ?

Yes

>
>> +{
>> + const struct ublk_param_basic *p = &ub->params.basic;
>> +
>> + if (!p->chunk_sectors)
>> + return 0;
>> +
>> + /* Zone size is a power of 2 */
>> + return p->dev_sectors >> ilog2(p->chunk_sectors);
>> +}
>> +
>> +static int ublk_set_nr_zones(struct ublk_device *ub)
>> +{
>> + ub->ub_disk->nr_zones = get_nr_zones(ub);
>> + if (!ub->ub_disk->nr_zones)
>> + return -EINVAL;
>> +
>> + return 0;
>> +}
>> +
>> +static int ublk_revalidate_disk_zones(struct ublk_device *ub)
>> +{
>> + if (ublk_dev_is_zoned(ub))
>
> Nit: This if could be moved to the caller site.

Ok. `ublk_revalidate_disk_zones()` still required because
blk_revalidate_disk_zones not defined when !CONFIG_BLK_DEV_ZONED though.

>
>> + return blk_revalidate_disk_zones(ub->ub_disk, NULL);
>> +
>> + return 0;
>> +}
>> +
>> +static int ublk_dev_param_zoned_validate(const struct ublk_device *ub)
>> +{
>> + const struct ublk_param_zoned *p = &ub->params.zoned;
>> + int nr_zones;
>> +
>> + if (ublk_dev_is_zoned(ub) && !ublk_dev_params_zoned(ub))
>> + return -EINVAL;
>> +
>> + if (!ublk_dev_is_zoned(ub) && ublk_dev_params_zoned(ub))
>> + return -EINVAL;
>> +
>> + if (!ublk_dev_params_zoned(ub))
>> + return 0;
>> +
>> + if (!p->max_zone_append_sectors)
>> + return -EINVAL;
>> +
>> + nr_zones = get_nr_zones(ub);
>> +
>> + if (p->max_active_zones > nr_zones)
>> + return -EINVAL;
>> +
>> + if (p->max_open_zones > nr_zones)
>> + return -EINVAL;
>> +
>> + return 0;
>> +}
>> +
>> +static int ublk_dev_param_zoned_apply(struct ublk_device *ub)
>> +{
>> + const struct ublk_param_zoned *p = &ub->params.zoned;
>> +
>> + disk_set_zoned(ub->ub_disk, BLK_ZONED_HM);
>> + blk_queue_required_elevator_features(ub->ub_disk->queue,
>> + ELEVATOR_F_ZBD_SEQ_WRITE);
>> + disk_set_max_active_zones(ub->ub_disk, p->max_active_zones);
>> + disk_set_max_open_zones(ub->ub_disk, p->max_open_zones);
>> + blk_queue_max_zone_append_sectors(ub->ub_disk->queue, p->max_zone_append_sectors);
>> +
>> + return 0;
>
> Make the function void if there is no error return.

It needs to be non void because it does validation when !CONFIG_BLK_DEV_ZONED.

>
>> +}
>> +
>> +/* Based on virtblk_alloc_report_buffer */
>> +static void *ublk_alloc_report_buffer(struct ublk_device *ublk,
>> + unsigned int nr_zones, size_t *buflen)
>> +{
>> + struct request_queue *q = ublk->ub_disk->queue;
>> + size_t bufsize;
>> + void *buf;
>> +
>> + nr_zones = min_t(unsigned int, nr_zones,
>> + ublk->ub_disk->nr_zones);
>> +
>> + bufsize = nr_zones * sizeof(struct blk_zone);
>> + bufsize =
>> + min_t(size_t, bufsize, queue_max_hw_sectors(q) << SECTOR_SHIFT);
>> + bufsize = min_t(size_t, bufsize, queue_max_segments(q) << PAGE_SHIFT);
>> +
>> + while (bufsize >= sizeof(struct blk_zone)) {
>> + buf = __vmalloc(bufsize, GFP_KERNEL | __GFP_NORETRY);
>> + if (buf) {
>> + *buflen = bufsize;
>> + return buf;
>> + }
>> + bufsize >>= 1;
>> + }
>> +
>> + *buflen = 0;
>> + return NULL;
>> +}
>> +
>> +static int ublk_report_zones(struct gendisk *disk, sector_t sector,
>> + unsigned int nr_zones, report_zones_cb cb, void *data)
>> +{
>> + struct ublk_device *ub = disk->private_data;
>> + unsigned int zone_size_sectors = disk->queue->limits.chunk_sectors;
>> + unsigned int first_zone = sector >> ilog2(zone_size_sectors);
>> + unsigned int done_zones = 0;
>> + unsigned int max_zones_per_request;
>> + int ret;
>> + struct blk_zone *buffer;
>> + size_t buffer_length;
>> +
>> + if (!ublk_dev_is_zoned(ub))
>> + return -EOPNOTSUPP;
>
> See comment above. This shoud be checked when the command is received,
> together with all other zoned operations.

Ok

>
>> +
>> + nr_zones = min_t(unsigned int, ub->ub_disk->nr_zones - first_zone,
>> + nr_zones);
>> +
>> + buffer = ublk_alloc_report_buffer(ub, nr_zones, &buffer_length);
>> + if (!buffer)
>> + return -ENOMEM;
>> +
>> + max_zones_per_request = buffer_length / sizeof(struct blk_zone);
>> +
>> + while (done_zones < nr_zones) {
>> + unsigned int remaining_zones = nr_zones - done_zones;
>> + unsigned int zones_in_request =
>> + min_t(unsigned int, remaining_zones, max_zones_per_request);
>> + struct request *req;
>> + struct ublk_rq_data *pdu;
>> + blk_status_t status;
>> +
>> + memset(buffer, 0, buffer_length);
>> +
>> + req = blk_mq_alloc_request(disk->queue, REQ_OP_DRV_IN, 0);
>> + if (IS_ERR(req)) {
>> + ret = PTR_ERR(req);
>
> Nit: if this happens while you already got some zones in the report
> (that is, not on the first iteration), then you could return these zones
> instead of an error. But not a big deal.

Is it really worth the extra lines of code? I'm thinking if you hit this
you have other problems and the half zone report probably won't be of
any use.

>
>> + goto out;
>> + }
>> +
>> + pdu = blk_mq_rq_to_pdu(req);
>> + pdu->operation = UBLK_IO_OP_REPORT_ZONES;
>> + pdu->sector = sector;
>> + pdu->nr_sectors = remaining_zones * zone_size_sectors;
>> +
>> + ret = blk_rq_map_kern(disk->queue, req, buffer, buffer_length,
>> + GFP_KERNEL);
>> + if (ret) {
>> + blk_mq_free_request(req);
>
> Same here.
>
>> + goto out;
>> + }
>> +
>> + status = blk_execute_rq(req, 0);
>> + ret = blk_status_to_errno(status);
>> + blk_mq_free_request(req);
>> + if (ret)
>> + goto out;
>> +
>> + for (unsigned int i = 0; i < zones_in_request; i++) {
>> + struct blk_zone *zone = buffer + i;
>> +
>> + /* A zero length zone means no more zones in this response */
>> + if (!zone->len)
>> + break;
>> +
>> + ret = cb(zone, i, data);
>> + if (ret)
>> + goto out;
>> +
>> + done_zones++;
>> + sector += zone_size_sectors;
>> +
>> + }
>> + }
>> +
>> + ret = done_zones;
>> +
>> +out:
>> + kvfree(buffer);
>> + return ret;
>> +}
>> +
>> +#else
>> +
>> +static int ublk_set_nr_zones(struct ublk_device *ub)
>> +{
>> + return 0;
>> +}
>> +
>> +static int ublk_dev_param_zoned_validate(const struct ublk_device *ub)
>> +{
>> + if (ublk_dev_params_zoned(ub))
>> + return -EINVAL;
>> + return 0;
>> +}
>> +
>> +static int ublk_dev_param_zoned_apply(struct ublk_device *ub)
>> +{
>> + if (ublk_dev_params_zoned(ub))
>> + return -EINVAL;
>
> The caller site calls this only if ublk_dev_params_zoned() is true. So
> this should be an unconditional return -ENOTSUPP I think.

Yes

>
>> + return 0;
>> +}
>> +
>> +static int ublk_revalidate_disk_zones(struct ublk_device *ub)
>> +{
>> + return 0;
>> +}
>> +
>> +#endif
>> diff --git a/include/uapi/linux/ublk_cmd.h b/include/uapi/linux/ublk_cmd.h
>> index 2ebb8d5d827a..234c194f0a82 100644
>> --- a/include/uapi/linux/ublk_cmd.h
>> +++ b/include/uapi/linux/ublk_cmd.h
>> @@ -176,6 +176,12 @@
>> /* Copy between request and user buffer by pread()/pwrite() */
>> #define UBLK_F_USER_COPY (1UL << 7)
>>
>> +/*
>> + * User space sets this flag when setting up the device to request zoned storage support. Kernel may
>> + * deny the request by returning an error.
>> + */
>> +#define UBLK_F_ZONED (1ULL << 8)
>> +
>> /* device state */
>> #define UBLK_S_DEV_DEAD 0
>> #define UBLK_S_DEV_LIVE 1
>> @@ -235,6 +241,11 @@ struct ublksrv_ctrl_dev_info {
>> #define UBLK_IO_OP_DISCARD 3
>> #define UBLK_IO_OP_WRITE_SAME 4
>> #define UBLK_IO_OP_WRITE_ZEROES 5
>> +#define UBLK_IO_OP_ZONE_OPEN 10
>> +#define UBLK_IO_OP_ZONE_CLOSE 11
>> +#define UBLK_IO_OP_ZONE_FINISH 12
>> +#define UBLK_IO_OP_ZONE_APPEND 13
>> +#define UBLK_IO_OP_ZONE_RESET 15
>> /*
>> * Passthrough (driver private) operation codes range between
>> * __UBLK_IO_OP_DRV_IN_START and __UBLK_IO_OP_DRV_IN_END for REQ_OP_DRV_IN type
>> @@ -242,6 +253,16 @@ struct ublksrv_ctrl_dev_info {
>> * __UBLK_IO_OP_DRV_OUT_END for REQ_OP_DRV_OUT type operations.
>> */
>> #define __UBLK_IO_OP_DRV_IN_START 32
>> +/*
>> + * Construct a zone report. The report request is carried in `struct
>> + * ublksrv_io_desc`. The `start_sector` field must be the first sector of a zone
>> + * and shall indicate the first zone of the report. The `nr_sectors` shall
>> + * indicate how many zones should be reported (divide by zone size to get number
>> + * of zones in the report) and must be an integer multiple of the zone size. The
>> + * report shall be delivered as a `struct blk_zone` array. To report fewer zones
>> + * than requested, zero the last entry of the returned array.
>> + */
>> +#define UBLK_IO_OP_REPORT_ZONES __UBLK_IO_OP_DRV_IN_START
>> #define __UBLK_IO_OP_DRV_IN_END 96
>> #define __UBLK_IO_OP_DRV_OUT_START __UBLK_IO_OP_DRV_IN_END
>> #define __UBLK_IO_OP_DRV_OUT_END 160
>> @@ -341,6 +362,13 @@ struct ublk_param_devt {
>> __u32 disk_minor;
>> };
>>
>> +struct ublk_param_zoned {
>> + __u32 max_open_zones;
>> + __u32 max_active_zones;
>> + __u32 max_zone_append_sectors;
>> + __u8 reserved[20];
>> +};
>> +
>> struct ublk_params {
>> /*
>> * Total length of parameters, userspace has to set 'len' for both
>> @@ -352,11 +380,13 @@ struct ublk_params {
>> #define UBLK_PARAM_TYPE_BASIC (1 << 0)
>> #define UBLK_PARAM_TYPE_DISCARD (1 << 1)
>> #define UBLK_PARAM_TYPE_DEVT (1 << 2)
>> +#define UBLK_PARAM_TYPE_ZONED (1 << 3)
>> __u32 types; /* types of parameter included */
>>
>> struct ublk_param_basic basic;
>> struct ublk_param_discard discard;
>> struct ublk_param_devt devt;
>> + struct ublk_param_zoned zoned;
>> };
>>
>> #endif

Next message: kah . jing . lee: "[PATCH 2/2 RESEND] firmware: stratix10-rsu: query spt addresses"
Previous message: kah . jing . lee: "[PATCH 1/2 RESEND] firmware: stratix10-svc: Generic Mailbox Command"
In reply to: Damien Le Moal: "Re: [PATCH v6 3/3] ublk: enable zoned storage support"
Next in thread: Ming Lei: "Re: [PATCH v6 3/3] ublk: enable zoned storage support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]