[PATCH 1/2] ARM: dts: qcom: Update the PD macros in dts

[Rohit Agarwal]

Update the PD macros according to the new macros.

Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
---
 arch/arm/boot/dts/qcom/qcom-msm8226.dtsi | 2 +-
 arch/arm/boot/dts/qcom/qcom-sdx55.dtsi   | 6 +++---
 arch/arm/boot/dts/qcom/qcom-sdx65.dtsi   | 6 +++---
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index 313a726..1e12b3f 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -761,7 +761,7 @@
 					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 
-			power-domains = <&rpmpd MSM8226_VDDCX>;
+			power-domains = <&rpmpd RPMPD_VDDCX>;
 			power-domain-names = "cx";
 
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index df3cd9c..435570c 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -56,7 +56,7 @@
 			reg = <0x0>;
 			enable-method = "psci";
 			clocks = <&apcs>;
-			power-domains = <&rpmhpd SDX55_CX>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
 			power-domain-names = "rpmhpd";
 			operating-points-v2 = <&cpu_opp_table>;
 		};
@@ -552,8 +552,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd SDX55_CX>,
-					<&rpmhpd SDX55_MSS>;
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
 			power-domain-names = "cx", "mss";
 
 			qcom,smem-states = <&modem_smp2p_out 0>;
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index 1a35830..16516e9 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -57,7 +57,7 @@
 			reg = <0x0>;
 			enable-method = "psci";
 			clocks = <&apcs>;
-			power-domains = <&rpmhpd SDX65_CX_AO>;
+			power-domains = <&rpmhpd RPMHPD_CX_AO>;
 			power-domain-names = "rpmhpd";
 			operating-points-v2 = <&cpu_opp_table>;
 		};
@@ -442,8 +442,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd SDX65_CX>,
-					<&rpmhpd SDX65_MSS>;
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
 			power-domain-names = "cx", "mss";
 
 			qcom,smem-states = <&modem_smp2p_out 0>;
-- 
2.7.4