Re: [PATCH V2] PCI: qcom: Use PARF_SLV_ADDR_SPACE_SIZE for ops_2_3_3
From: Manivannan Sadhasivam
Date: Wed Jul 05 2023 - 04:45:13 EST
On Mon, Jul 03, 2023 at 11:27:57PM +0530, Sricharan Ramabadhran wrote:
> PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro is used for IPQ8074
> 2_3_3 post_init ops. pcie slave addr size was initially set
PCIe
> to 0x358, but was wrongly changed to 0x168 as a part of
commit 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
> "PCI: qcom: Remove PCIE20_ prefix from register definitions"
> Fixing it, by using the right macro PARF_SLV_ADDR_SPACE_SIZE
> and removing the unused PARF_SLV_ADDR_SPACE_SIZE_2_3_3.
>
Commit message should be imperative.
> Without this pcie bring up on IPQ8074 is broken now.
>
> Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> ---
> [V2] Fixed the 'fixes tag' correctly, subject, right macro usage
>
> drivers/pci/controller/dwc/pcie-qcom.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 4ab30892f6ef..1689d072fe86 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -43,7 +43,6 @@
> #define PARF_PHY_REFCLK 0x4c
> #define PARF_CONFIG_BITS 0x50
> #define PARF_DBI_BASE_ADDR 0x168
> -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16c /* Register offset specific to IP ver 2.3.3 */
> #define PARF_MHI_CLOCK_RESET_CTRL 0x174
> #define PARF_AXI_MSTR_WR_ADDR_HALT 0x178
> #define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8
> @@ -811,7 +810,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
> u32 val;
>
> writel(SLV_ADDR_SPACE_SZ,
> - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_2_3_3);
> + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
This could be wrapped in the above line itself.
- Mani
>
> val = readl(pcie->parf + PARF_PHY_CTRL);
> val &= ~PHY_TEST_PWR_DOWN;
> --
> 2.34.1
>
--
மணிவண்ணன் சதாசிவம்