Re: [PATCH v1 3/5] tty: serial: meson: apply ttyS devname instead of ttyAML for new SoCs

[Conor Dooley]

On Tue, Jul 04, 2023 at 04:59:34PM +0300, Dmitry Rokosov wrote:
> It is worth noting that the devname ttyS is a widely recognized tty name
> and is commonly used by many uart device drivers. Given the established
> usage and compatibility concerns, it may not be feasible to change the
> devname for older SoCs. However, for new definitions, it is acceptable
> and even recommended to use a new devname to help ensure clarity and
> avoid any potential conflicts on lower or upper software levels.

> In
> addition, modify the meson_uart_dt match data for g12a, a1, and s4 to
> their appropriate values to ensure proper devname values and
> functionality.

IMO, this is a separate change that should be in another patch, had to
go looking through a several of unrelated $subject patches to understand
how the binding patch was going to work.

Cheers,
Conor.

> For more information please refer to IRC discussion at [1].
> 
> Links:
>     [1]: https://libera.irclog.whitequark.org/linux-amlogic/2023-07-03
> 
> Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxx>
> ---
>  drivers/tty/serial/meson_uart.c | 33 +++++++++++++++++++++++++++++++--
>  1 file changed, 31 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
> index 87c0eb5f2dba..361f9326b527 100644
> --- a/drivers/tty/serial/meson_uart.c
> +++ b/drivers/tty/serial/meson_uart.c
> @@ -82,6 +82,7 @@ static struct uart_driver meson_uart_driver;
>  static struct uart_port *meson_ports[AML_UART_PORT_NUM];
>  
>  struct meson_uart_data {
> +	const char *dev_name;
>  	bool has_xtal_div2;
>  };
>  
> @@ -683,6 +684,7 @@ static int meson_uart_probe_clocks(struct platform_device *pdev,
>  
>  static int meson_uart_probe(struct platform_device *pdev)
>  {
> +	const struct meson_uart_data *priv_data;
>  	struct resource *res_mem;
>  	struct uart_port *port;
>  	u32 fifosize = 64; /* Default is 64, 128 for EE UART_0 */
> @@ -729,6 +731,18 @@ static int meson_uart_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> +	priv_data = device_get_match_data(&pdev->dev);
> +
> +	if (priv_data) {
> +		struct console *cons = meson_uart_driver.cons;
> +
> +		meson_uart_driver.dev_name = priv_data->dev_name;
> +
> +		if (cons)
> +			strscpy(cons->name, priv_data->dev_name,
> +				sizeof(cons->name));
> +	}
> +
>  	if (!meson_uart_driver.state) {
>  		ret = uart_register_driver(&meson_uart_driver);
>  		if (ret)
> @@ -748,7 +762,7 @@ static int meson_uart_probe(struct platform_device *pdev)
>  	port->x_char = 0;
>  	port->ops = &meson_uart_ops;
>  	port->fifosize = fifosize;
> -	port->private_data = (void *)device_get_match_data(&pdev->dev);
> +	port->private_data = (void *)priv_data;
>  
>  	meson_ports[pdev->id] = port;
>  	platform_set_drvdata(pdev, port);
> @@ -780,6 +794,17 @@ static int meson_uart_remove(struct platform_device *pdev)
>  }
>  
>  static struct meson_uart_data meson_g12a_uart_data = {
> +	.dev_name = "ttyAML",
> +	.has_xtal_div2 = true,
> +};
> +
> +static struct meson_uart_data meson_a1_uart_data = {
> +	.dev_name = "ttyS",
> +	.has_xtal_div2 = false,
> +};
> +
> +static struct meson_uart_data meson_s4_uart_data = {
> +	.dev_name = "ttyS",
>  	.has_xtal_div2 = true,
>  };
>  
> @@ -794,7 +819,11 @@ static const struct of_device_id meson_uart_dt_match[] = {
>  	},
>  	{
>  		.compatible = "amlogic,meson-s4-uart",
> -		.data = (void *)&meson_g12a_uart_data,
> +		.data = (void *)&meson_s4_uart_data,
> +	},
> +	{
> +		.compatible = "amlogic,meson-a1-uart",
> +		.data = (void *)&meson_a1_uart_data,
>  	},
>  	{ /* sentinel */ },
>  };
> -- 
> 2.36.0
>

Attachment: signature.asc
Description: PGP signature