[PATCH v5 2/5] ublk: move types to shared header file
From: Andreas Hindborg
Date: Tue Jul 04 2023 - 12:52:29 EST
From: Andreas Hindborg <a.hindborg@xxxxxxxxxxx>
This change is in preparation for ublk zoned storage support.
Signed-off-by: Andreas Hindborg <a.hindborg@xxxxxxxxxxx>
---
MAINTAINERS | 1 +
drivers/block/ublk_drv.c | 92 +---------------------------------
drivers/block/ublk_drv.h | 103 +++++++++++++++++++++++++++++++++++++++
3 files changed, 105 insertions(+), 91 deletions(-)
create mode 100644 drivers/block/ublk_drv.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 27ef11624748..ace71c90751c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -21554,6 +21554,7 @@ L: linux-block@xxxxxxxxxxxxxxx
S: Maintained
F: Documentation/block/ublk.rst
F: drivers/block/ublk_drv.c
+F: drivers/block/ublk_drv.h
F: include/uapi/linux/ublk_cmd.h
UCLINUX (M68KNOMMU AND COLDFIRE)
diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 1c823750c95a..bca0c4e1cfd8 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -45,6 +45,7 @@
#include <linux/namei.h>
#include <linux/kref.h>
#include <uapi/linux/ublk_cmd.h>
+#include "ublk_drv.h"
#define UBLK_MINORS (1U << MINORBITS)
@@ -62,63 +63,11 @@
#define UBLK_PARAM_TYPE_ALL (UBLK_PARAM_TYPE_BASIC | \
UBLK_PARAM_TYPE_DISCARD | UBLK_PARAM_TYPE_DEVT)
-struct ublk_rq_data {
- struct llist_node node;
-
- struct kref ref;
-};
struct ublk_uring_cmd_pdu {
struct ublk_queue *ubq;
};
-/*
- * io command is active: sqe cmd is received, and its cqe isn't done
- *
- * If the flag is set, the io command is owned by ublk driver, and waited
- * for incoming blk-mq request from the ublk block device.
- *
- * If the flag is cleared, the io command will be completed, and owned by
- * ublk server.
- */
-#define UBLK_IO_FLAG_ACTIVE 0x01
-
-/*
- * IO command is completed via cqe, and it is being handled by ublksrv, and
- * not committed yet
- *
- * Basically exclusively with UBLK_IO_FLAG_ACTIVE, so can be served for
- * cross verification
- */
-#define UBLK_IO_FLAG_OWNED_BY_SRV 0x02
-
-/*
- * IO command is aborted, so this flag is set in case of
- * !UBLK_IO_FLAG_ACTIVE.
- *
- * After this flag is observed, any pending or new incoming request
- * associated with this io command will be failed immediately
- */
-#define UBLK_IO_FLAG_ABORTED 0x04
-
-/*
- * UBLK_IO_FLAG_NEED_GET_DATA is set because IO command requires
- * get data buffer address from ublksrv.
- *
- * Then, bio data could be copied into this data buffer for a WRITE request
- * after the IO command is issued again and UBLK_IO_FLAG_NEED_GET_DATA is unset.
- */
-#define UBLK_IO_FLAG_NEED_GET_DATA 0x08
-
-struct ublk_io {
- /* userspace buffer address from io cmd */
- __u64 addr;
- unsigned int flags;
- int res;
-
- struct io_uring_cmd *cmd;
-};
-
struct ublk_queue {
int q_id;
int q_depth;
@@ -140,45 +89,6 @@ struct ublk_queue {
#define UBLK_DAEMON_MONITOR_PERIOD (5 * HZ)
-struct ublk_device {
- struct gendisk *ub_disk;
-
- char *__queues;
-
- unsigned int queue_size;
- struct ublksrv_ctrl_dev_info dev_info;
-
- struct blk_mq_tag_set tag_set;
-
- struct cdev cdev;
- struct device cdev_dev;
-
-#define UB_STATE_OPEN 0
-#define UB_STATE_USED 1
-#define UB_STATE_DELETED 2
- unsigned long state;
- int ub_number;
-
- struct mutex mutex;
-
- spinlock_t mm_lock;
- struct mm_struct *mm;
-
- struct ublk_params params;
-
- struct completion completion;
- unsigned int nr_queues_ready;
- unsigned int nr_privileged_daemon;
-
- /*
- * Our ubq->daemon may be killed without any notification, so
- * monitor each queue's daemon periodically
- */
- struct delayed_work monitor_work;
- struct work_struct quiesce_work;
- struct work_struct stop_work;
-};
-
/* header of ublk_params */
struct ublk_params_header {
__u32 len;
diff --git a/drivers/block/ublk_drv.h b/drivers/block/ublk_drv.h
new file mode 100644
index 000000000000..2a4ab721d513
--- /dev/null
+++ b/drivers/block/ublk_drv.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _UBLK_DRV_H
+#define _UBLK_DRV_H
+
+#include <uapi/linux/ublk_cmd.h>
+#include <linux/blk-mq.h>
+#include <linux/cdev.h>
+
+/*
+ * io command is active: sqe cmd is received, and its cqe isn't done
+ *
+ * If the flag is set, the io command is owned by ublk driver, and waited
+ * for incoming blk-mq request from the ublk block device.
+ *
+ * If the flag is cleared, the io command will be completed, and owned by
+ * ublk server.
+ */
+#define UBLK_IO_FLAG_ACTIVE 0x01
+
+/*
+ * IO command is completed via cqe, and it is being handled by ublksrv, and
+ * not committed yet
+ *
+ * Basically exclusively with UBLK_IO_FLAG_ACTIVE, so can be served for
+ * cross verification
+ */
+#define UBLK_IO_FLAG_OWNED_BY_SRV 0x02
+
+/*
+ * IO command is aborted, so this flag is set in case of
+ * !UBLK_IO_FLAG_ACTIVE.
+ *
+ * After this flag is observed, any pending or new incoming request
+ * associated with this io command will be failed immediately
+ */
+#define UBLK_IO_FLAG_ABORTED 0x04
+
+/*
+ * UBLK_IO_FLAG_NEED_GET_DATA is set because IO command requires
+ * get data buffer address from ublksrv.
+ *
+ * Then, bio data could be copied into this data buffer for a WRITE request
+ * after the IO command is issued again and UBLK_IO_FLAG_NEED_GET_DATA is unset.
+ */
+#define UBLK_IO_FLAG_NEED_GET_DATA 0x08
+
+
+struct ublk_device {
+ struct gendisk *ub_disk;
+
+ char *__queues;
+
+ unsigned int queue_size;
+ struct ublksrv_ctrl_dev_info dev_info;
+
+ struct blk_mq_tag_set tag_set;
+
+ struct cdev cdev;
+ struct device cdev_dev;
+
+#define UB_STATE_OPEN 0
+#define UB_STATE_USED 1
+#define UB_STATE_DELETED 2
+ unsigned long state;
+ int ub_number;
+
+ struct mutex mutex;
+
+ spinlock_t mm_lock;
+ struct mm_struct *mm;
+
+ struct ublk_params params;
+
+ struct completion completion;
+ unsigned int nr_queues_ready;
+ unsigned int nr_privileged_daemon;
+
+ /*
+ * Our ubq->daemon may be killed without any notification, so
+ * monitor each queue's daemon periodically
+ */
+ struct delayed_work monitor_work;
+ struct work_struct quiesce_work;
+ struct work_struct stop_work;
+};
+
+struct ublk_rq_data {
+ struct llist_node node;
+
+ struct kref ref;
+};
+
+struct ublk_io {
+ /* userspace buffer address from io cmd */
+ __u64 addr;
+ unsigned int flags;
+ int res;
+
+ struct io_uring_cmd *cmd;
+};
+
+#endif
--
2.41.0