Re: [PATCH 1/3] dt-bindings: clock: imx8-acm: Add audio clock mux support

[Krzysztof Kozlowski]

On 04/07/2023 07:39, Shengjiu Wang wrote:
> Add the clock dt-binding file for audio clock mux. which
> is the IP for i.MX8QM, i.MX8QXP, i.MX8DXL.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>

Except what the bot already pointed out:

> ---
>  .../devicetree/bindings/clock/imx8-acm.yaml   | 71 +++++++++++++++++++
>  1 file changed, 71 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/imx8-acm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/imx8-acm.yaml b/Documentation/devicetree/bindings/clock/imx8-acm.yaml
> new file mode 100644
> index 000000000000..820c06b81aa6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/imx8-acm.yaml

Filename matching compatible. At least vendor prefix is missing.


> @@ -0,0 +1,71 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/imx8-acm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX8 Audio Clock Mux Binding
> +
> +maintainers:
> +  - Shengjiu Wang <shengjiu.wang@xxxxxxx>
> +
> +description: |
> +  NXP i.MX8 Audio Clock Mux is dedicated clock muxing IP
> +  used to control Audio related clock on the SoC.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nxp,imx8qm-acm
> +      - nxp,imx8qxp-acm
> +      - nxp,imx8dxl-acm
> +
> +  reg:
> +    maxItems: 1
> +
> +  power-domains:
> +    minItems: 13
> +    maxItems: 21


21 power domains? What's this? Why clock device make entire SoC awake?

Anyway, you need to list them.

> +
> +  '#clock-cells':
> +    const: 1
> +    description:
> +      The clock consumer should specify the desired clock by having the clock
> +      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8-clock.h
> +      for the full list of i.MX8 ACM clock IDs.
> +
> +required:
> +  - compatible
> +  - reg
> +  - power-domains
> +  - '#clock-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  # Clock Control Module node:
> +  - |
> +    #include <dt-bindings/firmware/imx/rsrc.h>
> +
> +    acm@59e00000 {


Node names should be generic. See also explanation and list of examples
in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +        compatible = "nxp,imx8qxp-acm";
> +        reg = <0x59e00000 0x1D0000>;

Don't mix hexes. Only lower-case.

Please perform some basic review in NXP before sending it.

Best regards,
Krzysztof