Re: [PATCH v14 01/25] docs: gunyah: Introduce Gunyah Hypervisor
From: Elliot Berman
Date: Mon Jul 03 2023 - 18:42:25 EST
On 6/16/2023 9:32 AM, Alex Elder wrote:
On 6/13/23 12:20 PM, Elliot Berman wrote:
Gunyah is an open-source Type-1 hypervisor developed by Qualcomm. It
does not depend on any lower-privileged OS/kernel code for its core
functionality. This increases its security and can support a smaller
trusted computing based when compared to Type-2 hypervisors.
s/based/base/
Add documentation describing the Gunyah hypervisor and the main
components of the Gunyah hypervisor which are of interest to Linux
virtualization development.
Reviewed-by: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
Signed-off-by: Elliot Berman <quic_eberman@xxxxxxxxxxx>
I have some questions and comments. But I trust that you
can answer them and update your patch in a reasonable way
to address what I say. So... please consider these things,
and update as you see fit.
Reviewed-by: Alex Elder <elder@xxxxxxxxxx>
---
Documentation/virt/gunyah/index.rst | 113 ++++++++++++++++++++
Documentation/virt/gunyah/message-queue.rst | 63 +++++++++++
Documentation/virt/index.rst | 1 +
3 files changed, 177 insertions(+)
create mode 100644 Documentation/virt/gunyah/index.rst
create mode 100644 Documentation/virt/gunyah/message-queue.rst
diff --git a/Documentation/virt/gunyah/index.rst
b/Documentation/virt/gunyah/index.rst
new file mode 100644
index 0000000000000..74aa345e0a144
--- /dev/null
+++ b/Documentation/virt/gunyah/index.rst
@@ -0,0 +1,113 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================
+Gunyah Hypervisor
+=================
+
+.. toctree::
+ :maxdepth: 1
+
+ message-queue
+
+Gunyah is a Type-1 hypervisor which is independent of any OS kernel,
and runs in
+a higher CPU privilege level. It does not depend on any
lower-privileged operating system
+for its core functionality. This increases its security and can
support a much smaller
+trusted computing base than a Type-2 hypervisor.
+
+Gunyah is an open source hypervisor. The source repo is available at
+https://github.com/quic/gunyah-hypervisor.
+
+Gunyah provides these following features.
+
+- Scheduling:
+
+ A scheduler for virtual CPUs (vCPUs) on physical CPUs enables
time-sharing
+ of the CPUs. Gunyah supports two models of scheduling:
+
+ 1. "Behind the back" scheduling in which Gunyah hypervisor
schedules vCPUS on its own.
s/VCPUS/VCPUs/
+ 2. "Proxy" scheduling in which a delegated VM can donate part of
one of its vCPU slice
+ to another VM's vCPU via a hypercall.
This might sound dumb, but can there be more vCPUs than there
are physical CPUs? Is a vCPU *tied* to a particular physical
CPU, or does it just indicate that a VM has one abstracted CPU
available to use--and any available physical CPU core can
implement it (possibly changing between time slices)?
There can be more vCPUs than physical CPUs. If someone wanted to
hard-code their VM to use 16 vCPUs, they could (I picked 16 arbitrarily).
The latter -- the physical CPU that makes the "vcpu_run" hypercall will
be the one to run the vCPU. The userspace thread triggers the hypercall
via GH_VCPU_RUN ioctl and is dependent on the host's task placement for
which physical cpu that userspace thread runs on.
+
+- Memory Management:
+
+ APIs handling memory, abstracted as objects, limiting direct use of
physical
+ addresses. Memory ownership and usage tracking of all memory under
its control.
+ Memory partitioning between VMs is a fundamental security feature.
+
+- Interrupt Virtualization:
+
+ Uses CPU hardware interrupt virtualization capabilities. Interrupts
are handled
+ in the hypervisor and routed to the assigned VM.
+
+- Inter-VM Communication:
+
+ There are several different mechanisms provided for communicating
between VMs.
+
+- Virtual platform:
+
+ Architectural devices such as interrupt controllers and CPU timers
are directly provided
+ by the hypervisor as well as core virtual platform devices and
system APIs such as ARM PSCI.
+
+- Device Virtualization:
+
+ Para-virtualization of devices is supported using inter-VM
communication.
+
+Architectures supported
+=======================
+AArch64 with a GIC
+
+Resources and Capabilities
+==========================
+
+Some services or resources provided by the Gunyah hypervisor are
described to a virtual machine by
+capability IDs. For instance, inter-VM communication is performed
with doorbells and message queues.
+Gunyah allows access to manipulate that doorbell via the capability
ID. These resources are
+described in Linux as a struct gh_resource.
+
+High level management of these resources is performed by the resource
manager VM. RM informs a
+guest VM about resources it can access through either the device tree
or via guest-initiated RPC.
+
+For each virtual machine, Gunyah maintains a table of resources which
can be accessed by that VM.
+An entry in this table is called a "capability" and VMs can only
access resources via this
+capability table. Hence, virtual Gunyah resources are referenced by a
"capability IDs" and not
+"resource IDs". If 2 VMs have access to the same resource, they might
not be using the same
+capability ID to access that resource since the capability tables are
independent per VM.
+
+Resource Manager
+================
+
+The resource manager (RM) is a privileged application VM supporting
the Gunyah Hypervisor.
+It provides policy enforcement aspects of the virtualization system.
The resource manager can
+be treated as an extension of the Hypervisor but is separated to its
own partition to ensure
+that the hypervisor layer itself remains small and secure and to
maintain a separation of policy
+and mechanism in the platform. RM runs at arm64 NS-EL1 similar to
other virtual machines.
+
+Communication with the resource manager from each guest VM happens
with message-queue.rst. Details
+about the specific messages can be found in
drivers/virt/gunyah/rsc_mgr.c
+
+::
+
+ +-------+ +--------+ +--------+
+ | RM | | VM_A | | VM_B |
+ +-.-.-.-+ +---.----+ +---.----+
+ | | | |
+ +-.-.-----------.------------.----+
+ | | \==========/ | |
+ | \========================/ |
+ | Gunyah |
+ +---------------------------------+
+
+The source for the resource manager is available at
https://github.com/quic/gunyah-resource-manager.
+
+The resource manager provides the following features:
+
+- VM lifecycle management: allocating a VM, starting VMs, destruction
of VMs
+- VM access control policy, including memory sharing and lending
+- Interrupt routing configuration
+- Forwarding of system-level events (e.g. VM shutdown) to owner VM
+
+When booting a virtual machine which uses a devicetree such as Linux,
resource manager overlays a
+/hypervisor node. This node can let Linux know it is running as a
Gunyah guest VM,
+how to communicate with resource manager, and basic description and
capabilities of
Maybe:
This node lets Linux know it is running as a Gunyah guest VM.
It provides a basic description and capabilities of the VM,
as well as information required to communicate with the resource
manager.
+this VM. See
Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml for
a description
+of this node.
diff --git a/Documentation/virt/gunyah/message-queue.rst
b/Documentation/virt/gunyah/message-queue.rst
new file mode 100644
index 0000000000000..b352918ae54b4
--- /dev/null
+++ b/Documentation/virt/gunyah/message-queue.rst
@@ -0,0 +1,63 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Message Queues
+==============
+Message queue is a simple low-capacity IPC channel between two VMs.
It is
I don't know what the "capacity" of an IPC channel is. But
that's OK I guess; it's sort of descriptive.
+intended for sending small control and configuration messages. Each
message
+queue is unidirectional, so a full-duplex IPC channel requires a pair
of queues.
+
+Messages can be up to 240 bytes in length. Longer messages require a
further
+protocol on top of the message queue messages themselves. For
instance, communication
+with the resource manager adds a header field for sending longer
messages via multiple
+message fragments.
+
+The diagram below shows how message queue works. A typical
configuration involves
+2 message queues. Message queue 1 allows VM_A to send messages to
VM_B. Message
+queue 2 allows VM_B to send messages to VM_A.
+
+1. VM_A sends a message of up to 240 bytes in length. It raises a
hypercall
+ with the message to inform the hypervisor to add the message to
+ message queue 1's queue. The hypervisor copies memory into the
internal
+ message queue representation; the memory doesn't need to be shared
between
+ VM_A and VM_B.
+
+2. Gunyah raises the corresponding interrupt for VM_B (Rx vIRQ) when
any of
+ these happens:
+
+ a. gh_msgq_send() has PUSH flag. Queue is immediately flushed.
This is the typical case.
+ b. Explicility with gh_msgq_push command from VM_A.
s/Explicility/Explicitly/
Is gh_msgq_send() a function and gh_msgq_push a "command" or
something? Why the difference in parentheses? (Pick a
convention and follow it.)
Will fix.
Does "Queue is flushed" mean "VM_B is interrupted"?
Yes, I'll clarify that's what it means. VM_B could get the interrupt and
still decide not to read from the queue.
VM_A calls gh_msgq_push, and that causes the VM_B interrupt to
be signaled?
Yes.
I'm being a little picky but I think these descriptions could be
improved a bit.
+ c. Message queue has reached a threshold depth.
+
+3. VM_B calls gh_msgq_recv() and Gunyah copies message to requested
buffer.
It sure would be nice if all this didn't have to be copied
twice. But I recognize the copies ensure isolation.
+
+4. Gunyah buffers messages in the queue. If the queue became full
when VM_A added a message,
+ the return values for gh_msgq_send() include a flag that indicates
the queue is full.
+ Once VM_B receives the message and, thus, there is space in the
queue, Gunyah
+ will raise the Tx vIRQ on VM_A to indicate it can continue sending
messages.
Does the Tx vIRQ on VM_A fire after *every* message is sent,
or only when the state of the queue goes from "full" to "not"?
(Looking at patch 6 it looks like the latter.)
Tx vIRQ only fires when state of queue goes from "full" to "not".
This may not be very relevant, but Gunyah allows the "not full"
threshold to be less than the queue depth. For instance, the Tx vIRQ
could be configured to only fire once there are no pending messages in
the queue. Linux doesn't presently configure this threshold.
If it's signaled after every message is sent, does it
indicate that the message has been *received* by VM_B
(versus just received and copied by Gunyah)?
To connect some dots: the Tx vIRQ is fired when the reader reads a
message and the number of messages still in the queue decrements to the
"not full" threshold.
https://github.com/quic/gunyah-hypervisor/blob/3d4014404993939f898018cfb1935c2d9bfc2830/hyp/ipc/msgqueue/src/msgqueue_common.c#L142-L148
+
+For VM_B to send a message to VM_A, the process is identical, except
that hypercalls
+reference message queue 2's capability ID. Each message queue has its
own independent
+vIRQ: two TX message queues will have two vIRQs (and two capability
IDs).
+
+::
+
+ +---------------+ +-----------------+
+---------------+
+ | VM_A | |Gunyah hypervisor| |
VM_B |
+ | | | |
| |
+ | | | |
| |
+ | | Tx | |
| |
+ | |-------->| | Rx vIRQ
| |
+ |gh_msgq_send() | Tx vIRQ |Message queue 1
|-------->|gh_msgq_recv() |
+ | |<------- | |
| |
+ | | | |
| |
+ | Message Queue | | | | Message
Queue |
+ | driver | | | |
driver |
+ | | | |
| |
+ | | | |
| |
+ | | | | Tx
| |
+ | | Rx vIRQ |
|<--------| |
+ |gh_msgq_recv() |<--------|Message queue 2 | Tx vIRQ
|gh_msgq_send() |
+ | | |
|-------->| |
+ | | | |
| |
+ | | | |
| |
+ +---------------+ +-----------------+
+---------------+
diff --git a/Documentation/virt/index.rst b/Documentation/virt/index.rst
index 7fb55ae08598d..15869ee059b35 100644
--- a/Documentation/virt/index.rst
+++ b/Documentation/virt/index.rst
@@ -16,6 +16,7 @@ Virtualization Support
coco/sev-guest
coco/tdx-guest
hyperv/index
+ gunyah/index
.. only:: html and subproject