Re: [PATCH 2/5] dt-bindings: serial: geni-qcom: Allow no qup-core icc path

From: Rob Herring
Date: Mon Jul 03 2023 - 10:50:56 EST

Next message: Rob Herring: "Re: [PATCH 3/5] dt-bindings: i2c: qcom,i2c-geni: Allow no qup-core icc path"
Previous message: Geert Uytterhoeven: "Re: [PATCH] arm64: dts: renesas: rzv2mevk2: Fix eMMC/SDHI pinctrl names"
In reply to: Krzysztof Kozlowski: "Re: [PATCH 2/5] dt-bindings: serial: geni-qcom: Allow no qup-core icc path"
Next in thread: Konrad Dybcio: "[PATCH 4/5] soc: qcom: geni-se: Allow any combination of icc paths"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, 03 Jul 2023 15:31:11 +0200, Konrad Dybcio wrote:
> Some SoCs (like SM8150 and SM8250) don't seem to provide a qup-core path.
> Allow such case.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
> .../bindings/serial/qcom,serial-geni-qcom.yaml | 26 +++++++++++++++-------
> 1 file changed, 18 insertions(+), 8 deletions(-)
>

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.example.dtb: geniqup@8c0000: serial@a88000: More than one condition true in oneOf schema:
{'$filename': '/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml',
'$id': 'http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#',
'$schema': 'http://devicetree.org/meta-schemas/core.yaml#',
'allOf': [{'$ref': '/schemas/serial/serial.yaml#'},
{'oneOf': [{'required': ['interrupts']},
{'required': ['interrupts-extended']}]}],
'oneOf': [{'patternProperties': {'pinctrl-[0-9]+': True},
'properties': {'$nodename': True,
'bootph-all': True,
'bootph-pre-ram': True,
'bootph-pre-sram': True,
'bootph-some-ram': True,
'bootph-verify': True,
'interconnect-names': {'items': [{'const': 'qup-config'}],
'maxItems': 1,
'minItems': 1,
'type': 'array'},
'interconnects': {'maxItems': 1,
'minItems': 1},
'phandle': True,
'pinctrl-names': True,
'secure-status': True,
'status': True}},
{'patternProperties': {'pinctrl-[0-9]+': True},
'properties': {'$nodename': True,
'bootph-all': True,
'bootph-pre-ram': True,
'bootph-pre-sram': True,
'bootph-some-ram': True,
'bootph-verify': True,
'interconnect-names': {'items': [{'const': 'qup-core'},
{'const': 'qup-config'}],
'maxItems': 2,
'minItems': 2,
'type': 'array'},
'interconnects': {'maxItems': 2,
'minItems': 2},
'phandle': True,
'pinctrl-names': True,
'secure-status': True,
'status': True}}],
'properties': {'$nodename': True,
'assigned-clock-parents': True,
'assigned-clock-rates': True,
'assigned-clocks': True,
'bootph-all': True,
'bootph-pre-ram': True,
'bootph-pre-sram': True,
'bootph-some-ram': True,
'bootph-verify': True,
'clock-names': {'items': [{'const': 'se'}],
'maxItems': 1,
'minItems': 1,
'type': 'array'},
'clocks': {'maxItems': 1, 'minItems': 1},
'compatible': {'items': [{'enum': ['qcom,geni-uart',
'qcom,geni-debug-uart']}],
'maxItems': 1,
'minItems': 1,
'type': 'array'},
'interrupt-parent': True,
'interrupts': {'maxItems': 2,
'minItems': 1,
'type': 'array'},
'interrupts-extended': {'maxItems': 2,
'minItems': 1,
'type': 'array'},
'operating-points-v2': True,
'phandle': True,
'pinctrl-0': True,
'pinctrl-1': True,
'pinctrl-names': {'items': [{'const': 'default'},
{'const': 'sleep'}],
'maxItems': 2,
'minItems': 1,
'type': 'array'},
'power-domains': {'maxItems': 1, 'minItems': 1},
'reg': {'maxItems': 1, 'minItems': 1},
'secure-status': True,
'status': True},
'required': ['compatible', 'clocks', 'clock-names', 'reg'],
'select': {'properties': {'compatible': {'contains': {'enum': ['qcom,geni-debug-uart',
'qcom,geni-uart']}}},
'required': ['compatible']},
'title': 'Qualcomm Geni based QUP UART interface',
'type': 'object',
'unevaluatedProperties': False}
from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.example.dtb: serial@a88000: More than one condition true in oneOf schema:
{'$filename': '/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml',
'$id': 'http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#',
'$schema': 'http://devicetree.org/meta-schemas/core.yaml#',
'allOf': [{'$ref': '/schemas/serial/serial.yaml#'},
{'oneOf': [{'required': ['interrupts']},
{'required': ['interrupts-extended']}]}],
'oneOf': [{'patternProperties': {'pinctrl-[0-9]+': True},
'properties': {'$nodename': True,
'bootph-all': True,
'bootph-pre-ram': True,
'bootph-pre-sram': True,
'bootph-some-ram': True,
'bootph-verify': True,
'interconnect-names': {'items': [{'const': 'qup-config'}],
'maxItems': 1,
'minItems': 1,
'type': 'array'},
'interconnects': {'maxItems': 1,
'minItems': 1},
'phandle': True,
'pinctrl-names': True,
'secure-status': True,
'status': True}},
{'patternProperties': {'pinctrl-[0-9]+': True},
'properties': {'$nodename': True,
'bootph-all': True,
'bootph-pre-ram': True,
'bootph-pre-sram': True,
'bootph-some-ram': True,
'bootph-verify': True,
'interconnect-names': {'items': [{'const': 'qup-core'},
{'const': 'qup-config'}],
'maxItems': 2,
'minItems': 2,
'type': 'array'},
'interconnects': {'maxItems': 2,
'minItems': 2},
'phandle': True,
'pinctrl-names': True,
'secure-status': True,
'status': True}}],
'properties': {'$nodename': True,
'assigned-clock-parents': True,
'assigned-clock-rates': True,
'assigned-clocks': True,
'bootph-all': True,
'bootph-pre-ram': True,
'bootph-pre-sram': True,
'bootph-some-ram': True,
'bootph-verify': True,
'clock-names': {'items': [{'const': 'se'}],
'maxItems': 1,
'minItems': 1,
'type': 'array'},
'clocks': {'maxItems': 1, 'minItems': 1},
'compatible': {'items': [{'enum': ['qcom,geni-uart',
'qcom,geni-debug-uart']}],
'maxItems': 1,
'minItems': 1,
'type': 'array'},
'interrupt-parent': True,
'interrupts': {'maxItems': 2,
'minItems': 1,
'type': 'array'},
'interrupts-extended': {'maxItems': 2,
'minItems': 1,
'type': 'array'},
'operating-points-v2': True,
'phandle': True,
'pinctrl-0': True,
'pinctrl-1': True,
'pinctrl-names': {'items': [{'const': 'default'},
{'const': 'sleep'}],
'maxItems': 2,
'minItems': 1,
'type': 'array'},
'power-domains': {'maxItems': 1, 'minItems': 1},
'reg': {'maxItems': 1, 'minItems': 1},
'secure-status': True,
'status': True},
'required': ['compatible', 'clocks', 'clock-names', 'reg'],
'select': {'properties': {'compatible': {'contains': {'enum': ['qcom,geni-debug-uart',
'qcom,geni-uart']}}},
'required': ['compatible']},
'title': 'Qualcomm Geni based QUP UART interface',
'type': 'object',
'unevaluatedProperties': False}
from schema $id: http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230703-topic-8250_qup_icc-v1-2-fea39aa07525@xxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Next message: Rob Herring: "Re: [PATCH 3/5] dt-bindings: i2c: qcom,i2c-geni: Allow no qup-core icc path"
Previous message: Geert Uytterhoeven: "Re: [PATCH] arm64: dts: renesas: rzv2mevk2: Fix eMMC/SDHI pinctrl names"
In reply to: Krzysztof Kozlowski: "Re: [PATCH 2/5] dt-bindings: serial: geni-qcom: Allow no qup-core icc path"
Next in thread: Konrad Dybcio: "[PATCH 4/5] soc: qcom: geni-se: Allow any combination of icc paths"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]