Re: [External] Re: [PATCH v2 2/3] firmware: introduce FFI for SMBIOS entry.

From: 运辉崔
Date: Mon Jul 03 2023 - 08:42:14 EST

Next message: Dan Carpenter: "Re: [PATCH] sunrpc: avoid constant-out-of-range warning with clang"
Previous message: Peter Zijlstra: "Re: [PATCH] sched/rt: Fix possible warn when push_rt_task"
In reply to: Conor Dooley: "Re: [External] Re: [PATCH v2 2/3] firmware: introduce FFI for SMBIOS entry."
Next in thread: Conor Dooley: "Re: [External] Re: [PATCH v2 2/3] firmware: introduce FFI for SMBIOS entry."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Conor,

Thanks for your comments.

On Mon, Jul 3, 2023 at 4:36 PM Conor Dooley <conor.dooley@xxxxxxxxxxxxx> wrote:
>
> Hey,
>
> On Mon, Jul 03, 2023 at 04:23:53PM +0800, 运辉崔 wrote:
> >
> > > nit: please don't write your commit messages as bullet lists
> > Okay, thanks for your suggestion.
> >
> > > > +FDT FIRMWARE INTERFACE (FFI)
> > > > +M: Yunhui Cui cuiyunhui@xxxxxxxxxxxxx
> > > > +S: Maintained
> > > > +F: drivers/firmware/ffi.c
> > > > +F: include/linux/ffi.h
> > >
> > > Are you going to apply patches for this, or is someone else?
> > Yes, it will be used by patch 3/3.
>
> That's not what I asked :(

Sorry, ok, what do you want to ask?

> > > > EXTERNAL CONNECTOR SUBSYSTEM (EXTCON)
> > > > M: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
> > > > M: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> > > > diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> > > > index b59e3041fd62..ea0149fb4683 100644
> > > > --- a/drivers/firmware/Kconfig
> > > > +++ b/drivers/firmware/Kconfig
> > > > @@ -303,6 +303,17 @@ config TURRIS_MOX_RWTM
> > > > other manufacturing data and also utilize the Entropy Bit Generator
> > > > for hardware random number generation.
> > > >
> > > > +config FDT_FW_INTERFACE
> > > > + bool "An interface for passing firmware info through FDT"
> > > > + depends on OF && OF_FLATTREE
> > > > + default n
> > > > + help
> > > > + When some bootloaders do not support EFI, and the arch does not
> > > > + support SMBIOS_ENTRY_POINT_SCAN_START, then you can enable this option
> > > > + to support the transfer of firmware information, such as smbios tables.
> > >
> > > Could you express this dependency on !SMBIOS_ENTRY_POINT_SCAN_START in
> > > Kconfig & then simply the text to:
> > > "Enable this option to support the transfer of firmware information,
> > > such as smbios tables, for bootloaders that do not support EFI."
> > > since it would not even appear if the arch supports scanning for the
> > > entry point?
> > > If I was was a punter trying to configure my kernel in menuconfig or
> > > whatever, I should be able to decide based on the help text if I need
> > > this, not going grepping for #defines in headers.
> > Okay， I'll update on v3.
> >
> >
> > >
> > > > static void __init dmi_scan_machine(void)
> > > > @@ -660,58 +686,22 @@ static void __init dmi_scan_machine(void)
> > > > char __iomem *p, *q;
> > > > char buf[32];
> > > >
> > > > +#ifdef CONFIG_FDT_FW_INTERFACE
> > > > + if (dmi_sacn_smbios(ffi.smbios3, ffi.smbios))
> > >
> > > "dmi_sacn_smbios"
> > >
> > > > + goto error;
> > > > +#endif
> > >
> > > Does this not mean that if FDT_FW_INTERFACE is enabled, but the platform
> > > wants to use EFI, it won't be able to? The `goto error;` makes this look
> > > mutually exclusive to my efi-unaware eyes.
> >
> > If you have enabled FFI, then if something goes wrong, you should goto error.
> > Just like the origin code:
> > if (efi_enabled(EFI_CONFIG_TABLES)) {
> > if (dmi_sacn_smbios(efi.smbios3, efi.smbios))
> > goto error;
> > } else if (IS_ENABLED(CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK)) {
> > p = dmi_early_remap(SMBIOS_ENTRY_POINT_SCAN_START, 0x10000);
> > if (p == NULL)
> > goto error;
>
> Does this not make FFI and EFI mutually exclusive Kconfig options?
> Suppose you are on a system that does not implement FFI, but does
> implement EFI - what's going to happen then?
> AFAICT, dmi_sacn_smbios(ffi.smbios3, ffi.smbios) will fail & you'll do a
> `goto error` & skip the EFI code. What am I missing?

Code is not intended to be mutually exclusive, get the correct value and return,
The code is going to be changed to this:

#ifdef CONFIG_FDT_FW_INTERFACE
if (ffi_enabled(FFI_CONFIG_TABLES)) {
if (!dmi_sacn_smbios(ffi.smbios3, ffi.smbios))
return;
}
#endif

>
> > > > if (efi_enabled(EFI_CONFIG_TABLES)) {
> > > > - /*
> > > > - * According to the DMTF SMBIOS reference spec v3.0.0, it is
> > > > - * allowed to define both the 64-bit entry point (smbios3) and
> > > > - * the 32-bit entry point (smbios), in which case they should
> > > > - * either both point to the same SMBIOS structure table, or the
> > > > - * table pointed to by the 64-bit entry point should contain a
> > > > - * superset of the table contents pointed to by the 32-bit entry
> > > > - * point (section 5.2)
> > > > - * This implies that the 64-bit entry point should have
> > > > - * precedence if it is defined and supported by the OS. If we
> > > > - * have the 64-bit entry point, but fail to decode it, fall
> > > > - * back to the legacy one (if available)
> > > > - */
> > > > - if (efi.smbios3 != EFI_INVALID_TABLE_ADDR) {
> > > > - p = dmi_early_remap(efi.smbios3, 32);
> > > > - if (p == NULL)
> > > > - goto error;
> > > > - memcpy_fromio(buf, p, 32);
> > > > - dmi_early_unmap(p, 32);
> > > > -
> > > > - if (!dmi_smbios3_present(buf)) {
> > > > - dmi_available = 1;
> > > > - return;
> > > > - }
> > > > - }
> > > > - if (efi.smbios == EFI_INVALID_TABLE_ADDR)
> > > > + if (dmi_sacn_smbios(efi.smbios3, efi.smbios))
> > > > goto error;
> > > > -
> > > > - /* This is called as a core_initcall() because it isn't
> > > > - * needed during early boot. This also means we can
> > > > - * iounmap the space when we're done with it.
> > > > - */
> > > > - p = dmi_early_remap(efi.smbios, 32);
> > > > - if (p == NULL)
> > > > - goto error;
> > > > - memcpy_fromio(buf, p, 32);
> > > > - dmi_early_unmap(p, 32);
> > > > -
> > > > - if (!dmi_present(buf)) {
> > > > - dmi_available = 1;
> > > > - return;
> > > > - }
> > > > diff --git a/drivers/firmware/ffi.c b/drivers/firmware/ffi.c
> > > > new file mode 100644
> > > > index 000000000000..169802b4a7a8
> > > > --- /dev/null
> > > > +++ b/drivers/firmware/ffi.c
> > > > @@ -0,0 +1,36 @@
> > > > +// SPDX-License-Identifier: GPL-2.0-only
> > > > +
> > > > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> > > > +
> > > > +#include <linux/of.h>
> > > > +#include <linux/of_fdt.h>
> > > > +#include <linux/libfdt.h>
> > > > +#include <linux/ffi.h>
> > > > +
> > > > +#define FFI_INVALID_TABLE_ADDR (~0UL)
> > > > +
> > > > +struct ffi __read_mostly ffi = {
> > > > + .smbios = FFI_INVALID_TABLE_ADDR,
> > > > + .smbios3 = FFI_INVALID_TABLE_ADDR,
> > > > +};
> > >
> > > > +EXPORT_SYMBOL(ffi);
> > >
> > > > +// SPDX-License-Identifier: GPL-2.0-only
> > >
> > > Why not EXPORT_SYMBOL_GPL? But also, who is the user of this export?
> > Just like efi.
>
> I don't really understand how that is an answer to the questions.

I checked, the code is executed as the system starts, either Y or N, M
will not appear, and the same is true for ffi's user DMI.
So no need for EXPORT.

>
> > > > +
> > > > +void __init ffi_smbios_root_pointer(void)
> > > > +{
> > > > + int cfgtbl, len;
> > > > + fdt64_t *prop;
> > > > +
> > > > + cfgtbl = fdt_path_offset(initial_boot_params, "/cfgtables");
> > >
> > > These DT properties need to be documented in a binding.
> > >
> > > > + if (cfgtbl < 0) {
> > > > + pr_info("firmware table not found.\n");
> > >
> > > Isn't it perfectly valid for a DT not to contain this table? This print
> > > should be, at the very least, a pr_debug().
> > >
> > > > + return;
> > > > + }
> > > > + prop = fdt_getprop_w(initial_boot_params, cfgtbl, "smbios_phy_ptr", &len);
> > >
> > > Again, undocumented DT property. Please document them in a binding.
> > Okay, I'll add them into binding.
> >
> >
> > >
> > > > + if (!prop || len != sizeof(u64))
> > > > + pr_info("smbios entry point not found.\n");
> > > > + else
> > > > + ffi.smbios = fdt64_to_cpu(*prop);
> > > > +
> > > > + pr_info("smbios root pointer: %lx\n", ffi.smbios);
> > >
> > > ffi.smbios is not set if (!prop || len != sizeof(u64)), looks like your
> > > "if" should return and the contents of the else become unconditional?
> > > Otherwise, this print seems wrong.
>
> > OK, I will optimize this logic and print.
>
> It's not an optimisation. If the if branch of your code is taken, it
> currently will do
> pr_info("smbios entry point not found.\n");
> pr_info("smbios root pointer: %lx\n", ffi.smbios);
> which makes no sense...

Yeah, I got it, that's what I mean by "optimize".

>
> Thanks,
> Conor.
>

Thanks,
Yunhui

Next message: Dan Carpenter: "Re: [PATCH] sunrpc: avoid constant-out-of-range warning with clang"
Previous message: Peter Zijlstra: "Re: [PATCH] sched/rt: Fix possible warn when push_rt_task"
In reply to: Conor Dooley: "Re: [External] Re: [PATCH v2 2/3] firmware: introduce FFI for SMBIOS entry."
Next in thread: Conor Dooley: "Re: [External] Re: [PATCH v2 2/3] firmware: introduce FFI for SMBIOS entry."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]