Re: [PATCH 0/2] Baisc devicetree support for Amlogic T7

[Xianwei Zhao]

On 2023/6/30 00:33, Lucas Tanure wrote:
> [ EXTERNAL EMAIL ]
>
> On Tue, Jun 27, 2023 at 8:52 AM Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx> wrote:
> > On 2023/6/27 15:23, Conor Dooley wrote:
> >
> >
> >   > [ EXTERNAL EMAIL ]
> >   >
> >   > On Tue, Jun 27, 2023 at 02:13:34PM +0800, Xianwei Zhao wrote:
> >   >> Hi Conor,
> >   >>      Thanks for you reply.
> >   >> On 2023/6/26 18:02, Conor Dooley wrote:
> >   >>
> >   >>
> >   >>> [ EXTERNAL EMAIL ]
> >   >>>
> >   >>> Hey,
> >   >>>
> >   >>> On Mon, Jun 26, 2023 at 05:52:21PM +0800, Xianwei Zhao wrote:
> >   >>>> T7 is an advanced application processor designed for smart display.
> >   >>>>
> >   >>>> Add the new T7 SoC/board device tree bindings.
> >   >>>>
> >   >>>> Add basic support for the T7 based Amlogic AN400 board, which
> >   >>>> describesthe following components: CPU, GIC, IRQ, Timer, UART. It's
> >   >>>> capable of booting up into the serial console.
> >   >>>
> >   >>> Lucas has already sent patches for the T7 SoC & is at v5:
> >   >>> https://lore.kernel.org/linux-devicetree/20230623081242.109131-1-
> >   >>> tanure@xxxxxxxxx/
> >   >>> There's been a bit of discussion there, and there serial stuff in
> >   >>> particular is different in his series (it doesn't use always-on for
> >   >>> examples).
> >   >>> Could you please go and take a look at his series?
> >   >>>
> >   >>> Cheers,
> >   >>> Conor.
> >   >>>
> >   >> AN400 is the reference board designed by Amlogic, which is different
> >   >> from Khadas VIM4.
> >   >
> >   > Yet you share the same dtsi, which he has got through several
> >   > iterations of before you arrived.
> >   >
> > Hi Lucas,
> > Are you going to continue with the dtsi part?
> >
> >   >> And T7 serial is the same as S4, so I follow S4 serial.
> >   >
> >   > Yeah, no. SoC specific compatible please.
> >   >
> >   >
> >   > _______________________________________________
> >   > linux-amlogic mailing list
> >   > linux-amlogic@xxxxxxxxxxxxxxxxxxx
> >   > http://lists.infradead.org/mailman/listinfo/linux-amlogic
>
> Hi Xianwei,
>
> I am doing the basics for Amlogic T7 A311D2, but the next step ( sd
> card or emmc, something to boot on) would be more difficult for me
> than you.
> After the first series for Vim4 gets merged, I will start to work on
> how to get sd cards working.
> But if you already have that working for the AN400 board, please send
> it. And I will look at that work and use it for Vim4.
>
> Or, if you don't have it ready and want to share it with me, we can
> work together on these A311D2 patches.
> You test on AN400, and I test on Vim4.
>
> Thanks
> Lucas

We are preparing this part. However it depends on clock. So the clock 
must ready first.