Re: [PATCH v2 13/15] arm64: dts: qcom: sm6125: Add dispcc node

From: Marijn Suijten
Date: Thu Jun 29 2023 - 08:14:35 EST


On 2023-06-29 13:56:25, Dmitry Baryshkov wrote:
> On 27/06/2023 23:14, Marijn Suijten wrote:
> > Enable and configure the dispcc node on SM6125 for consumption by MDSS
> > later on.
> >
> > Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/sm6125.dtsi | 25 +++++++++++++++++++++++++
> > 1 file changed, 25 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> > index edb03508dba3..a5cc0d43d2d9 100644
> > --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> > @@ -3,6 +3,7 @@
> > * Copyright (c) 2021, Martin Botka <martin.botka@xxxxxxxxxxxxxx>
> > */
> >
> > +#include <dt-bindings/clock/qcom,dispcc-sm6125.h>
> > #include <dt-bindings/clock/qcom,gcc-sm6125.h>
> > #include <dt-bindings/clock/qcom,rpmcc.h>
> > #include <dt-bindings/dma/qcom-gpi.h>
> > @@ -1203,6 +1204,30 @@ sram@4690000 {
> > reg = <0x04690000 0x10000>;
> > };
> >
> > + dispcc: clock-controller@5f00000 {
> > + compatible = "qcom,sm6125-dispcc";
> > + reg = <0x05f00000 0x20000>;
> > + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
> > + <0>,
> > + <0>,
> > + <0>,
> > + <0>,
> > + <0>,
> > + <&gcc GCC_DISP_AHB_CLK>,
> > + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
> > + clock-names = "bi_tcxo",
> > + "dsi0_phy_pll_out_byteclk",
> > + "dsi0_phy_pll_out_dsiclk",
> > + "dsi1_phy_pll_out_dsiclk",
> > + "dp_phy_pll_link_clk",
> > + "dp_phy_pll_vco_div_clk",
> > + "cfg_ahb_clk",
> > + "gcc_disp_gpll0_div_clk_src";
> > + power-domains = <&rpmpd SM6125_VDDCX>;
>
> Would it be logical to specify the required-opps too?

Perhaps, but barely any other SoC aside from sm8x50 sets it on dispcc.
What should it be, rpmhpd_opp_low_svs? IIRC we used "svs" for the DSI
PHY despite not having a reference value downstream (it sets a range of
NOM-TURBO_NO_CPR, and RETENTION when it's off).

- Marijn

>
> > + #clock-cells = <1>;
> > + #power-domain-cells = <1>;
> > + };
> > +
> > apps_smmu: iommu@c600000 {
> > compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
> > reg = <0x0c600000 0x80000>;
> >
>
> --
> With best wishes
> Dmitry
>