[PATCH 1/3] net: phy: at803x: support qca8081 1G chip type

[Luo Jie]

The qca8081 1G chip version does not support 2.5 capability, which
is distinguished from qca8081 2.5G chip according to the bit0 of
register mmd7.0x901d.

The fast retrain and master slave seed configs are only needed when
the 2.5G capability is supported.

Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx>
---
 drivers/net/phy/at803x.c | 58 ++++++++++++++++++++++++++--------------
 1 file changed, 38 insertions(+), 20 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index c1f307d90518..3339ca372b24 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -272,6 +272,10 @@
 #define QCA808X_CDT_STATUS_STAT_OPEN		2
 #define QCA808X_CDT_STATUS_STAT_SHORT		3
 
+/* QCA808X 1G chip type */
+#define QCA808X_PHY_MMD7_CHIP_TYPE		0x901d
+#define QCA808X_PHY_CHIP_TYPE_1G		BIT(0)
+
 MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
 MODULE_AUTHOR("Matus Ujhelyi");
 MODULE_LICENSE("GPL");
@@ -898,12 +902,22 @@ static int at803x_get_features(struct phy_device *phydev)
 		return err;
 
 	if (phydev->drv->phy_id == QCA8081_PHY_ID) {
-		err = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_NG_EXTABLE);
+		err = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE);
 		if (err < 0)
 			return err;
 
-		linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported,
-				err & MDIO_PMA_NG_EXTABLE_2_5GBT);
+		/* QCA808X does not support 2.5G capability if the chip type is 1G according
+		 * to the register MMD7.QCA808X_PHY_MMD7_CHIP_TYPE.
+		 */
+
+		if (!(QCA808X_PHY_CHIP_TYPE_1G & err)) {
+			err = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_NG_EXTABLE);
+			if (err < 0)
+				return err;
+
+			linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported,
+					err & MDIO_PMA_NG_EXTABLE_2_5GBT);
+		}
 	}
 
 	if (phydev->drv->phy_id != ATH8031_PHY_ID)
@@ -1770,20 +1784,22 @@ static int qca808x_config_init(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	/* Config the fast retrain for the link 2500M */
-	ret = qca808x_phy_fast_retrain_config(phydev);
-	if (ret)
-		return ret;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported)) {
+		/* Config the fast retrain for the link 2500M */
+		ret = qca808x_phy_fast_retrain_config(phydev);
+		if (ret)
+			return ret;
 
-	/* Configure lower ramdom seed to make phy linked as slave mode */
-	ret = qca808x_phy_ms_random_seed_set(phydev);
-	if (ret)
-		return ret;
+		/* Configure lower ramdom seed to make phy linked as slave mode */
+		ret = qca808x_phy_ms_random_seed_set(phydev);
+		if (ret)
+			return ret;
 
-	/* Enable seed */
-	ret = qca808x_phy_ms_seed_enable(phydev, true);
-	if (ret)
-		return ret;
+		/* Enable seed */
+		ret = qca808x_phy_ms_seed_enable(phydev, true);
+		if (ret)
+			return ret;
+	}
 
 	/* Configure adc threshold as 100mv for the link 10M */
 	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
@@ -1822,11 +1838,13 @@ static int qca808x_read_status(struct phy_device *phydev)
 		 * value is configured as the same value, the link can't be up and no link change
 		 * occurs.
 		 */
-		if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR) {
-			qca808x_phy_ms_seed_enable(phydev, false);
-		} else {
-			qca808x_phy_ms_random_seed_set(phydev);
-			qca808x_phy_ms_seed_enable(phydev, true);
+		if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported)) {
+			if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR) {
+				qca808x_phy_ms_seed_enable(phydev, false);
+			} else {
+				qca808x_phy_ms_random_seed_set(phydev);
+				qca808x_phy_ms_seed_enable(phydev, true);
+			}
 		}
 	}
 
-- 
2.17.1