[PATCH V2 3/5] clk: qcom: gcc-qdu1000: Update GCC clocks as per the latest hw version

From: Imran Shaik
Date: Wed Jun 28 2023 - 05:34:32 EST


Add support for gcc_ddrss_ecpri_gsi_clk and update the GCC clkref clocks
as per the latest hardware version of QDU1000 and QRU100 SoCs.

Co-developed-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
Signed-off-by: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
---
Changes since v1:
- Newly added

drivers/clk/qcom/gcc-qdu1000.c | 32 ++++++++++++++++++++++++++------
1 file changed, 26 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/qcom/gcc-qdu1000.c b/drivers/clk/qcom/gcc-qdu1000.c
index c00d26a3e6df..991fb2bc97e9 100644
--- a/drivers/clk/qcom/gcc-qdu1000.c
+++ b/drivers/clk/qcom/gcc-qdu1000.c
@@ -1131,6 +1131,26 @@ static struct clk_branch gcc_ddrss_ecpri_dma_clk = {
},
};

+static struct clk_branch gcc_ddrss_ecpri_gsi_clk = {
+ .halt_reg = 0x54298,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x54298,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x54298,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "gcc_ddrss_ecpri_gsi_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &gcc_aggre_noc_ecpri_gsi_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_aon_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_ecpri_ahb_clk = {
.halt_reg = 0x3a008,
.halt_check = BRANCH_HALT_VOTED,
@@ -1447,14 +1467,13 @@ static struct clk_branch gcc_pcie_0_cfg_ahb_clk = {

static struct clk_branch gcc_pcie_0_clkref_en = {
.halt_reg = 0x9c004,
- .halt_bit = 31,
- .halt_check = BRANCH_HALT_ENABLE,
+ .halt_check = BRANCH_HALT,
.clkr = {
.enable_reg = 0x9c004,
.enable_mask = BIT(0),
.hw.init = &(const struct clk_init_data) {
.name = "gcc_pcie_0_clkref_en",
- .ops = &clk_branch_ops,
+ .ops = &clk_branch2_ops,
},
},
};
@@ -2274,14 +2293,13 @@ static struct clk_branch gcc_tsc_etu_clk = {

static struct clk_branch gcc_usb2_clkref_en = {
.halt_reg = 0x9c008,
- .halt_bit = 31,
- .halt_check = BRANCH_HALT_ENABLE,
+ .halt_check = BRANCH_HALT,
.clkr = {
.enable_reg = 0x9c008,
.enable_mask = BIT(0),
.hw.init = &(const struct clk_init_data) {
.name = "gcc_usb2_clkref_en",
- .ops = &clk_branch_ops,
+ .ops = &clk_branch2_ops,
},
},
};
@@ -2523,6 +2541,8 @@ static struct clk_regmap *gcc_qdu1000_clocks[] = {
[GCC_AGGRE_NOC_ECPRI_GSI_CLK] = &gcc_aggre_noc_ecpri_gsi_clk.clkr,
[GCC_PCIE_0_PHY_AUX_CLK_SRC] = &gcc_pcie_0_phy_aux_clk_src.clkr,
[GCC_PCIE_0_PIPE_CLK_SRC] = &gcc_pcie_0_pipe_clk_src.clkr,
+ [GCC_GPLL1_OUT_EVEN] = &gcc_gpll1_out_even.clkr,
+ [GCC_DDRSS_ECPRI_GSI_CLK] = &gcc_ddrss_ecpri_gsi_clk.clkr,
};

static const struct qcom_reset_map gcc_qdu1000_resets[] = {
--
2.25.1