Re: [PATCH 1/2] ARM: dts: qcom: msm8974: replace incorrect indentation in interconnect

[Konrad Dybcio]

On 27.06.2023 21:45, Luca Weiss wrote:
> The clocks definition in the interconnect nodes should use tabs (+ 1
> space) for indentation instead of 9 spaces. Fix that.
> 
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
> index aeca504918a0..c6475837eda3 100644
> --- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
> @@ -1075,7 +1075,7 @@ bimc: interconnect@fc380000 {
>  			#interconnect-cells = <1>;
>  			clock-names = "bus", "bus_a";
>  			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
> -			         <&rpmcc RPM_SMD_BIMC_A_CLK>;
> +				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
>  		};
>  
>  		snoc: interconnect@fc460000 {
> @@ -1084,7 +1084,7 @@ snoc: interconnect@fc460000 {
>  			#interconnect-cells = <1>;
>  			clock-names = "bus", "bus_a";
>  			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
> -			         <&rpmcc RPM_SMD_SNOC_A_CLK>;
> +				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
>  		};
>  
>  		pnoc: interconnect@fc468000 {
> @@ -1093,7 +1093,7 @@ pnoc: interconnect@fc468000 {
>  			#interconnect-cells = <1>;
>  			clock-names = "bus", "bus_a";
>  			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
> -			         <&rpmcc RPM_SMD_PNOC_A_CLK>;
> +				 <&rpmcc RPM_SMD_PNOC_A_CLK>;
>  		};
>  
>  		ocmemnoc: interconnect@fc470000 {
> @@ -1102,7 +1102,7 @@ ocmemnoc: interconnect@fc470000 {
>  			#interconnect-cells = <1>;
>  			clock-names = "bus", "bus_a";
>  			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
> -			         <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
> +				 <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
>  		};
>  
>  		mmssnoc: interconnect@fc478000 {
> @@ -1111,7 +1111,7 @@ mmssnoc: interconnect@fc478000 {
>  			#interconnect-cells = <1>;
>  			clock-names = "bus", "bus_a";
>  			clocks = <&mmcc MMSS_S0_AXI_CLK>,
> -			         <&mmcc MMSS_S0_AXI_CLK>;
> +				 <&mmcc MMSS_S0_AXI_CLK>;
>  		};
>  
>  		cnoc: interconnect@fc480000 {
> @@ -1120,7 +1120,7 @@ cnoc: interconnect@fc480000 {
>  			#interconnect-cells = <1>;
>  			clock-names = "bus", "bus_a";
>  			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
> -			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
> +				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
>  		};
>  
>  		tsens: thermal-sensor@fc4a9000 {
>