Re: [PATCH v2 02/12] mm: introduce execmem_text_alloc() and jit_text_alloc()

[Mark Rutland]

On Sun, Jun 25, 2023 at 07:14:17PM +0300, Mike Rapoport wrote:
> On Mon, Jun 19, 2023 at 10:09:02AM -0700, Andy Lutomirski wrote:
> > 
> > On Sun, Jun 18, 2023, at 1:00 AM, Mike Rapoport wrote:
> > > On Sat, Jun 17, 2023 at 01:38:29PM -0700, Andy Lutomirski wrote:
> > >> On Fri, Jun 16, 2023, at 1:50 AM, Mike Rapoport wrote:
> > >> > From: "Mike Rapoport (IBM)" <rppt@xxxxxxxxxx>
> > >> >
> > >> > module_alloc() is used everywhere as a mean to allocate memory for code.
> > >> >
> > >> > Beside being semantically wrong, this unnecessarily ties all subsystems
> > >> > that need to allocate code, such as ftrace, kprobes and BPF to modules
> > >> > and puts the burden of code allocation to the modules code.
> > >> >
> > >> > Several architectures override module_alloc() because of various
> > >> > constraints where the executable memory can be located and this causes
> > >> > additional obstacles for improvements of code allocation.
> > >> >
> > >> > Start splitting code allocation from modules by introducing
> > >> > execmem_text_alloc(), execmem_free(), jit_text_alloc(), jit_free() APIs.
> > >> >
> > >> > Initially, execmem_text_alloc() and jit_text_alloc() are wrappers for
> > >> > module_alloc() and execmem_free() and jit_free() are replacements of
> > >> > module_memfree() to allow updating all call sites to use the new APIs.
> > >> >
> > >> > The intention semantics for new allocation APIs:
> > >> >
> > >> > * execmem_text_alloc() should be used to allocate memory that must reside
> > >> >   close to the kernel image, like loadable kernel modules and generated
> > >> >   code that is restricted by relative addressing.
> > >> >
> > >> > * jit_text_alloc() should be used to allocate memory for generated code
> > >> >   when there are no restrictions for the code placement. For
> > >> >   architectures that require that any code is within certain distance
> > >> >   from the kernel image, jit_text_alloc() will be essentially aliased to
> > >> >   execmem_text_alloc().
> > >> >
> > >> 
> > >> Is there anything in this series to help users do the appropriate
> > >> synchronization when the actually populate the allocated memory with
> > >> code?  See here, for example:
> > >
> > > This series only factors out the executable allocations from modules and
> > > puts them in a central place.
> > > Anything else would go on top after this lands.
> > 
> > Hmm.
> > 
> > On the one hand, there's nothing wrong with factoring out common code. On
> > the other hand, this is probably the right time to at least start
> > thinking about synchronization, at least to the extent that it might make
> > us want to change this API.  (I'm not at all saying that this series
> > should require changes -- I'm just saying that this is a good time to
> > think about how this should work.)
> > 
> > The current APIs, *and* the proposed jit_text_alloc() API, don't actually
> > look like the one think in the Linux ecosystem that actually
> > intelligently and efficiently maps new text into an address space:
> > mmap().
> > 
> > On x86, you can mmap() an existing file full of executable code PROT_EXEC
> > and jump to it with minimal synchronization (just the standard implicit
> > ordering in the kernel that populates the pages before setting up the
> > PTEs and whatever user synchronization is needed to avoid jumping into
> > the mapping before mmap() finishes).  It works across CPUs, and the only
> > possible way userspace can screw it up (for a read-only mapping of
> > read-only text, anyway) is to jump to the mapping too early, in which
> > case userspace gets a page fault.  Incoherence is impossible, and no one
> > needs to "serialize" (in the SDM sense).
> > 
> > I think the same sequence (from userspace's perspective) works on other
> > architectures, too, although I think more cache management is needed on
> > the kernel's end.  As far as I know, no Linux SMP architecture needs an
> > IPI to map executable text into usermode, but I could easily be wrong.
> > (IIRC RISC-V has very developer-unfriendly icache management, but I don't
> > remember the details.)
> > 
> > Of course, using ptrace or any other FOLL_FORCE to modify text on x86 is
> > rather fraught, and I bet many things do it wrong when userspace is
> > multithreaded.  But not in production because it's mostly not used in
> > production.)
> > 
> > But jit_text_alloc() can't do this, because the order of operations
> > doesn't match.  With jit_text_alloc(), the executable mapping shows up
> > before the text is populated, so there is no atomic change from not-there
> > to populated-and-executable.  Which means that there is an opportunity
> > for CPUs, speculatively or otherwise, to start filling various caches
> > with intermediate states of the text, which means that various
> > architectures (even x86!) may need serialization.
> > 
> > For eBPF- and module- like use cases, where JITting/code gen is quite
> > coarse-grained, perhaps something vaguely like:
> > 
> > jit_text_alloc() -> returns a handle and an executable virtual address,
> > but does *not* map it there
> > jit_text_write() -> write to that handle
> > jit_text_map() -> map it and synchronize if needed (no sync needed on
> > x86, I think)
> > 
> > could be more efficient and/or safer.
> > 
> > (Modules could use this too.  Getting alternatives right might take some
> > fiddling, because off the top of my head, this doesn't match how it works
> > now.)
> > 
> > To make alternatives easier, this could work, maybe (haven't fully
> > thought it through):
> > 
> > jit_text_alloc()
> > jit_text_map_rw_inplace() -> map at the target address, but RW, !X
> > 
> > write the text and apply alternatives
> > 
> > jit_text_finalize() -> change from RW to RX *and synchronize*
> > 
> > jit_text_finalize() would either need to wait for RCU (possibly extra
> > heavy weight RCU to get "serialization") or send an IPI.
> 
> This essentially how modules work now. The memory is allocated RW, written
> and updated with alternatives and then made ROX in the end with set_memory
> APIs.
> 
> The issue with not having the memory mapped X when it's written is that we
> cannot use large pages to map it. One of the goals is to have executable
> memory mapped with large pages and make code allocator able to divide that
> page among several callers.
> 
> So the idea was that jit_text_alloc() will have a cache of large pages
> mapped ROX, will allocate memory from those caches and there will be
> jit_update() that uses text poking for writing to that memory.
> 
> Upon allocation of a large page to increase the cache, that large page will
> be "invalidated" by filling it with breakpoint instructions (e.g int3 on
> x86)

Does that work on x86?

That is in no way gauranteed for other architectures; on arm64 you need
explicit cache maintenance (with I-cache maintenance at the VA to be executed
from) followed by context-synchronization-events (e.g. via ISB instructions, or
IPIs).

Mark.