Re: [PATCH 13/15] arm64: dts: qcom: sm6125: Add dispcc node

[Konrad Dybcio]

On 24.06.2023 02:41, Marijn Suijten wrote:
> Enable and configure the dispcc node on SM6125 for consumption by MDSS
> later on.
> 
> Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm6125.dtsi | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> index edb03508dba3..7d78b4e48ebe 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> @@ -3,6 +3,7 @@
>   * Copyright (c) 2021, Martin Botka <martin.botka@xxxxxxxxxxxxxx>
>   */
>  
> +#include <dt-bindings/clock/qcom,dispcc-sm6125.h>
>  #include <dt-bindings/clock/qcom,gcc-sm6125.h>
>  #include <dt-bindings/clock/qcom,rpmcc.h>
>  #include <dt-bindings/dma/qcom-gpi.h>
> @@ -1203,6 +1204,28 @@ sram@4690000 {
>  			reg = <0x04690000 0x10000>;
>  		};
>  
> +		dispcc: clock-controller@5f00000 {
> +			compatible = "qcom,sm6125-dispcc";
> +			reg = <0x05f00000 0x20000>;
> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
> +				 <0>,
are you..

> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
> +			clock-names = "bi_tcxo",
> +				      "gcc_disp_gpll0_div_clk_src",
..sure?

Konrad
> +				      "dsi0_phy_pll_out_byteclk",
> +				      "dsi0_phy_pll_out_dsiclk",
> +				      "dsi1_phy_pll_out_dsiclk",
> +				      "dp_phy_pll_link_clk",
> +				      "dp_phy_pll_vco_div_clk";
> +			power-domains = <&rpmpd SM6125_VDDCX>;
> +			#clock-cells = <1>;
> +			#power-domain-cells = <1>;
> +		};
> +
>  		apps_smmu: iommu@c600000 {
>  			compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
>  			reg = <0x0c600000 0x80000>;
>