Re: [PATCH 1/2] dt-bindings: iio: ad74413r: add binding for digital input threshold

[Conor Dooley]

On Fri, Jun 23, 2023 at 01:33:25PM +0200, Rasmus Villemoes wrote:
> Allow specifying the threshold for which the channels configured as
> digital input change state.
> 
> Signed-off-by: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
> ---
> 
> Running dt_binding_check on this with a too small or large value in
> the example does give me an error, but the multipleOf does not seem to
> be enforced; the value 1234567 is not flagged. I don't know if that's
> expected (maybe I have too old versions of something).

That's one for Rob. I checked a few others and behaviour was the same
there.

>  .../devicetree/bindings/iio/addac/adi,ad74413r.yaml    | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
> index 590ea7936ad7..1f90ce3c7932 100644
> --- a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
> +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
> @@ -51,6 +51,14 @@ properties:
>        Shunt (sense) resistor value in micro-Ohms.
>      default: 100000000
>  
> +  digital-input-threshold-microvolt:

Should this not have an adi vendor prefix, similar to
"adi,digital-input-threshold-mode-fixed"?

Cheers,
Conor.

> +    description:
> +      Comparator threshold used by the channels configured to use the
> +      digital input function.
> +    minimum: 500000
> +    maximum: 16000000
> +    multipleOf: 500000
> +
>    reset-gpios:
>      maxItems: 1
>  
> @@ -143,6 +151,8 @@ examples:
>          refin-supply = <&ad74413r_refin>;
>          reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
>  
> +        digital-input-threshold-microvolt = <4000000>;
> +
>          channel@0 {
>            reg = <0>;
>  
> -- 
> 2.37.2
>

Attachment: signature.asc
Description: PGP signature