Re: [PATCH net-next 3/6] net: phy: update in-band AN mode when changing interface by PHY driver

From: Russell King (Oracle)
Date: Thu Jun 22 2023 - 11:07:59 EST


On Thu, Jun 22, 2023 at 04:43:51PM +0200, Simon Horman wrote:
> On Thu, Jun 22, 2023 at 12:19:02PM +0800, Choong Yong Liang wrote:
> > From: "Tan, Tee Min" <tee.min.tan@xxxxxxxxxxxxxxx>
> >
> > Add cur_link_an_mode into phy_device struct for PHY drivers to
> > communicate the in-band AN mode setting with phylink framework.
> >
> > As there is a mechanism in PHY drivers to switch the PHY interface
> > between SGMII and 2500BaseX according to link speed. In this case,
> > the in-band AN mode should be switching based on the PHY interface
> > as well, if the PHY interface has been changed/updated by PHY driver.
> >
> > For e.g., disable in-band AN in 2500BaseX mode, or enable in-band AN
> > back for SGMII mode (10/100/1000Mbps).
> >
> > Signed-off-by: Tan, Tee Min <tee.min.tan@xxxxxxxxxxxxxxx>
> > Signed-off-by: Choong Yong Liang <yong.liang.choong@xxxxxxxxxxxxxxx>
>
> ...
>
> > diff --git a/include/linux/phy.h b/include/linux/phy.h
> > index 11c1e91563d4..c685b526e307 100644
> > --- a/include/linux/phy.h
> > +++ b/include/linux/phy.h
> > @@ -756,6 +756,8 @@ struct phy_device {
> > /* MACsec management functions */
> > const struct macsec_ops *macsec_ops;
> > #endif
> > + /* For communicate the AN mode setting with phylink framework. */
> > + u8 cur_link_an_mode;
> > };
>
> Hi Choong Yong Liang,
>
> Please consider adding cur_link_an_mode to the kernel doc
> for struct phy_device - which is above the definition of struct phy_device.

This looks like it's grabbing something from phylink and stuffing it
into phylib. However, I have no idea, because I don't seem to have
received the original patches. I'm guessing the reason is:

2023-06-22 05:21:24 1qCBoy-0003ji-G9 H=mga03.intel.com
[134.134.136.65]:57703 I=[78.32.30.218]:25
X=TLS1.2:ECDHE_SECP521R1__RSA_SHA512__AES_256_GCM:256
F=<yong.liang.choong@xxxxxxxxxxxxxxx> rejected after DATA: unqualified
address not permitted: failing address in "Cc:" header is: Tan

Which I suspect came from:

Tan, Tee Min <tee.min.tan@xxxxxxxxxxxxxxx>

and someone doesn't realise that a "," in the display-name part of
an address *must* be quoted, otherwise "," is taken to be a separator
in the address list.

Consequently, it has now become:

Tan@xxxxxxxxxxxxxxxxxx, Tee Min <tee.min.tan@xxxxxxxxxxxxxxx>,

It should have been:

"Tan, Tee Min" <tee.min.tan@xxxxxxxxxxxxxxx>

with the double-quotes.

Please do not review this series further, but instead, please can the
author repost it forthwith with correct conformant headers so that a
proper review can be undertaken by all?

Thanks.

--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!