[PATCH v4 09/17] rtc: pcf2127: adapt for CLKOUT register at any offset

From: Hugo Villeneuve
Date: Thu Jun 22 2023 - 10:58:48 EST


From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>

This will simplify the implementation of new variants into this driver.

Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
Reviewed-by: Bruno Thomsen <bruno.thomsen@xxxxxxxxx>
---
drivers/rtc/rtc-pcf2127.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index ce7fe6e2fd47..21fa42870dd4 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -101,6 +101,7 @@ struct pcf21xx_config {
u8 regs_alarm_base; /* Alarm function base registers. */
u8 reg_wd_ctl; /* Watchdog control register. */
u8 reg_wd_val; /* Watchdog value register. */
+ u8 reg_clkout; /* Clkout register. */
};

struct pcf2127 {
@@ -631,6 +632,7 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
.regs_alarm_base = PCF2127_REG_ALARM_BASE,
.reg_wd_ctl = PCF2127_REG_WD_CTL,
.reg_wd_val = PCF2127_REG_WD_VAL,
+ .reg_clkout = PCF2127_REG_CLKOUT,
},
[PCF2129] = {
.type = PCF2129,
@@ -641,6 +643,7 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
.regs_alarm_base = PCF2127_REG_ALARM_BASE,
.reg_wd_ctl = PCF2127_REG_WD_CTL,
.reg_wd_val = PCF2127_REG_WD_VAL,
+ .reg_clkout = PCF2127_REG_CLKOUT,
},
};

@@ -720,12 +723,12 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
regmap_clear_bits(pcf2127->regmap, PCF2127_REG_CTRL1,
PCF2127_BIT_CTRL1_POR_OVRD);

- ret = regmap_read(pcf2127->regmap, PCF2127_REG_CLKOUT, &val);
+ ret = regmap_read(pcf2127->regmap, pcf2127->cfg->reg_clkout, &val);
if (ret < 0)
return ret;

if (!(val & PCF2127_BIT_CLKOUT_OTPR)) {
- ret = regmap_set_bits(pcf2127->regmap, PCF2127_REG_CLKOUT,
+ ret = regmap_set_bits(pcf2127->regmap, pcf2127->cfg->reg_clkout,
PCF2127_BIT_CLKOUT_OTPR);
if (ret < 0)
return ret;
--
2.30.2