Re: [PATCH V7 00/23] Add support UHS-II for GL9755

From: Victor Shih
Date: Wed Jun 21 2023 - 06:36:46 EST

Next message: Tarun Sahu: "[PATCH v2] dax/kmem: Pass valid argument to memory_group_register_static"
Previous message: Andi Shyti: "Re: [PATCH v2 2/2] i2c: Add GPIO-based hotplug gate"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi, Ulf

I will add a version history for each of the patches in the V8 version.

Thanks, Victor Shih

On Thu, Jun 15, 2023 at 12:06 AM Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
>
> On Wed, 7 Jun 2023 at 12:17, Victor Shih <victorshihgli@xxxxxxxxx> wrote:
> >
> > Hi, Ulf
> >
> > Excuse me, if you already have a closer look at a paragraph in the series,
> > could you let me know your comments first, let me check it first.
>
> Hi Victor,
>
> My apologies for the long delay. It looks like the series could
> benefit from a re-base, which is probably my fault because of the late
> review. There are also plenty of comments/questions from Adrian that
> you can address before sending a new version.
>
> Moreover it's getting too heavy to review this for me, as I am lacking
> a version history for each of the patches in the series. Just putting
> a version history in the cover-letter isn't sufficient when coming
> back to review this. Please fix that too and when sending a new
> version.
>
> Kind regards
> Uffe
>
> >
> > Thanks, Victor Shih
> >
> > On Fri, Mar 31, 2023 at 6:55 PM Victor Shih <victorshihgli@xxxxxxxxx> wrote:
> > >
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence
> > > [2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section
> > > 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register
> > > Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD
> > > compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet
> > > Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > > interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#6: for core
> > > patch#7-#22: for sdhci
> > > patch#23: for GL9755
> > >
> > > Changes in v7 (Mar. 31, 2023)
> > > * rebased to the linux-kernel-v6.3.0-rc3 in Ulf Hansson next branch.
> > > * according to the guidance and overall architecture provided
> > > by Ulf Hansson, Ben Chuang and Jason Lai to implement the
> > > UHS-2 Core function based on the patches of the [V4,0/6]
> > > Preparations to support SD UHS-II cards[5].
> > > * according to the guidance and comments provided by
> > > Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement
> > > the UHS-2 Host function based on the patches of the
> > > [RFC,v3.1,00/27] Add support UHS-II for GL9755[4].
> > > * implement the necessary function to let the UHS-2 Core/Host
> > > work properly.
> > > * fix most of checkpatch warnings/errors.
> > > * according to the guidance and comments provided by
> > > Adrian Hunter, Ben Chuang to implement the UHS-2
> > > Host function based on the patches of the
> > > [V5,00/26] Add support UHS-II for GL9755[6].
> > > * according to the guidance and comments provided by
> > > Ulf Hanssion, Adrian Hunter, Ben Chuang to implement the UHS-2
> > > Host function based on the patches of the
> > > [V6,00/24] Add support UHS-II for GL9755[7].
> > > * The uhs2_post_attach_sd() function is no longer needed so drop
> > > the V6 version of the Patch#22.
> > > * Modifies the usage of the flags used by the sdhci host for
> > > MMC_UHS2_INITIALIZED.
> > > * Patch#1: Drop unnecessary bracket.
> > > * Patch#2: Drop sd_uhs2_set_ios function.
> > > Used ->uhs2_control() callback for uhs2_set_ios
> > > in sd_uhs2_power_up().
> > > Used ->uhs2_control() callback for uhs2_set_ios
> > > in sd_uhs2_power_off().
> > > Drop MMC_TIMING_SD_UHS2 in favor of MMC_TIMING_UHS2_SPEED_A.
> > > Modify sd_uhs2_legacy_init to avoid the
> > > sd_uhs2_reinit cycle issue.
> > > * Patch#5: Drop unnecessary definitions.
> > > * Patch#6: Drop unnecessary function.
> > > Drop uhs2_state in favor of ios->timing.
> > > * Patch#7: Reorder values and positions of definitions.
> > > * Patch#9: Used sdhci_uhs2_mode function to simplify.
> > > * Patch#11: Drop pwr variable in sdhci_uhs2_set_power function.
> > > * Patch#14: Modify some descriptions.
> > > Drop unnecessary function.
> > > * Patch#15: Drop using uhs2_reset ops and use sdhci_uhs2_reset function
> > > in the sdhci_do_detect_init function.
> > > * Patch#17: Drop unnecessary function.
> > > * Patch#18: Drop unnecessary whitespace changes.
> > > Cancel the export state of some functions.
> > > * Patch#19: Drop unnecessary function.
> > > Used sdhci_uhs2_mode function to simplify.
> > > Modify some descriptions.
> > > Cancel the export state of some functions.
> > > * Patch#20: Drop using __sdhci_uhs2_host function and use
> > > __sdhci_add_host function in sdhci_uhs2_add_host function.
> > > Cancel the export state of some functions.
> > > * Patch#23: Drop using uhs2_post_attach_sd function.
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@xxxxxxxxxx/
> > > [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@xxxxxxxxx/
> > > [6] https://patchwork.kernel.org/project/linux-mmc/cover/20221019110647.11076-1-victor.shih@xxxxxxxxxxxxxxxxxxx/
> > > [7] https://patchwork.kernel.org/project/linux-mmc/cover/20221213090047.3805-1-victor.shih@xxxxxxxxxxxxxxxxxxx/
> > >
> > > ----------------- original cover letter from v6 -----------------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence
> > > [2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section
> > > 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register
> > > Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD
> > > compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet
> > > Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > > interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#6: for core
> > > patch#7-#23: for sdhci
> > > patch#24: for GL9755
> > >
> > > Changes in v6 (Dec. 12, 2022)
> > > * rebased to the linux-kernel-v6.1.0-rc8 in Ulf Hansson next branch.
> > > * according to the guidance and overall architecture provided
> > > by Ulf Hansson, Ben Chuang and Jason Lai to implement the
> > > UHS-2 Core function based on the patches of the [V4,0/6]
> > > Preparations to support SD UHS-II cards[5].
> > > * according to the guidance and comments provided by
> > > Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement
> > > the UHS-2 Host function based on the patches of the
> > > [RFC,v3.1,00/27] Add support UHS-II for GL9755[4].
> > > * implement the necessary function to let the UHS-2 Core/Host
> > > work properly.
> > > * fix most of checkpatch warnings/errors.
> > > * according to the guidance and comments provided by
> > > Adrian Hunter, Ben Chuang to implement the UHS-2
> > > Host function based on the patches of the
> > > [V5,00/26] Add support UHS-II for GL9755[6].
> > > * The uhs2_post_attach_sd() has implemented in Patch#6 and
> > > Patch#17 so drop the V5 version of the Patch#23.
> > > * Modifies the usage of the flags used by the sdhci host for
> > > MMC_UHS2_INITIALIZED.
> > > * Patch#5: Drop unused definitions and functions.
> > > * Patch#7: Rename definitions.
> > > Use BIT() GENMASK() in some cases.
> > > * Patch#8: Merge V5 version of Patch[7] and Patch[9] into
> > > V6 version of Patch[8].
> > > * Patch#9: Drop unnecessary function.
> > > Rename used definitions.
> > > * Patch#10: Drop unnecessary function and simplify some code.
> > > * Patch#11: Drop unnecessary function.
> > > Add new mmc_opt_regulator_set_ocr function.
> > > * Patch#13: Drop unnecessary function.
> > > Use GENMASK() and FIELD_PREP() in some cases.
> > > * Patch#14: Drop unnecessary function.
> > > Modify return value in some function.
> > > Use GENMASK() and FIELD_PREP() in some cases.
> > > * Patch#15: Drop unnecessary function.
> > > Rename used definitions.
> > > Use GENMASK() and FIELD_GET() in some cases.
> > > Wrap at 100 columns in some functions.
> > > * Patch#16: Drop unnecessary function.
> > > * Patch#17: Drop unnecessary function.
> > > Drop the unnecessary parameter when call the DBG()
> > > function.
> > > Rename used definitions.
> > > Cancel the export state of some functions.
> > > Use GENMASK() and FIELD_PREP() in some cases.
> > > * Patch#18: Drop unnecessary function.
> > > Add uhs2_dev_cmd function to simplify some functions.
> > > Rename used definitions.
> > > Cancel the export state of some functions.
> > > Use GENMASK() and FIELD_PREP() in some cases.
> > > * Patch#19: Drop unnecessary function.
> > > Add sdhci_uhs2_mode() in some functions.
> > > Rename used definitions.
> > > Cancel the export state of some functions.
> > > * Patch#20: Add new complete_work_fn/thread_irq_fn variables in
> > > struct sdhci_host.
> > > Use complete_work_fn/thread_irq_fn variables in
> > > sdhci_alloc_host()/sdhci_uhs2_add_host().
> > > Rename used definitions.
> > > * Patch[24]: Rename used definitions.
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@xxxxxxxxxx/
> > > [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@xxxxxxxxx/
> > > [6] https://patchwork.kernel.org/project/linux-mmc/cover/20221019110647.11076-1-victor.shih@xxxxxxxxxxxxxxxxxxx/
> > >
> > > ----------------- original cover letter from v5 -----------------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence
> > > [2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section
> > > 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register
> > > Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD
> > > compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet
> > > Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > > interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#6: for core
> > > patch#7-#25: for sdhci
> > > patch#26: for GL9755
> > >
> > > Changes in v5 (Oct. 19, 2022)
> > > * rebased to the linux-kernel-v6.1-rc1 in Ulf Hansson next branch.
> > > * according to the guidance and overall architecture provided
> > > by Ulf Hansson, Ben Chuang and Jason Lai to implement the
> > > UHS-2 Core function based on the patches of the [V4,0/6]
> > > Preparations to support SD UHS-II cards[5].
> > > * according to the guidance and comments provided by
> > > Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement
> > > the UHS-2 Host function based on the patches of the
> > > [RFC,v3.1,00/27] Add support UHS-II for GL9755[4].
> > > * implement the necessary function to let the UHS-2 Core/Host
> > > work properly.
> > > * fix most of checkpatch warnings/errors
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@xxxxxxxxxx/
> > > [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@xxxxxxxxx/
> > >
> > > ----------------- original cover letter from v3.1 -----------------
> > > This is an interim snapshot of our next version, v4, for enabling
> > > UHS-II on MMC/SD.
> > >
> > > It is focused on 'sdhci' side to address Adrian's comments regarding
> > > "modularising" sdhci-uhs2.c.
> > > The whole aim of this version is to get early feedback from Adrian (and
> > > others) on this issue. Without any consensus about the code structure,
> > > it would make little sense to go further ahead on sdhci side.
> > > (Actually, Adrian has made no comments other than "modularising" so far.)
> > >
> > > I heavily reworked/refactored sdhci-uhs2.c and re-organised the patch
> > > set to meet what I believe Adrian expects; no UHS-II related code in
> > > Legacy (UHS-I) code or sdhci.c.
> > >
> > > Nevertheless, almost of all changes I made are trivial and straightforward
> > > in this direction, and I believe that there is no logic changed since v3
> > > except sdhci_uhs2_irq(), as ops->irq hook, where we must deal with UHS-II
> > > command sequences in addition to UHS-II errors. So I added extra handlings.
> > >
> > > I admit that there is plenty of room for improvements (for example,
> > > handling host->flags), but again the focal point here is how sdhci-uhs2.c
> > > should be built as a module.
> > >
> > > Please review this series (particularly Patch#8-#26 and #27) from this
> > > viewpoint in the first place.
> > > (Ben is working on 'host' side but there is no change on 'host' side
> > > in this submission except a minor tweak.)
> > >
> > > Thanks,
> > > -Takahiro Akashi
> > >
> > > ------ original cover letter from v3 ------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence
> > > [2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section
> > > 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register
> > > Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD
> > > compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet
> > > Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > > interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#7: for core
> > > patch#8-#17: for sdhci
> > > patch#18-#21: for GL9755
> > >
> > > Tests
> > > =====
> > > Ran 'dd' command to evaluate the performance:
> > > (SanDisk UHS-II card on GL9755 controller)
> > > Read Write
> > > UHS-II disabled (UHS-I): 88.3MB/s 60.7MB/s
> > > UHS-II enabled : 206MB/s 80MB/s
> > >
> > > TODO
> > > ====
> > > - replace some define with BIT macro
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > >
> > > Changes in v3 (Jul. 10, 2020)
> > > * rebased to v5.8-rc4
> > > * add copyright notice
> > > * reorganize the patch set and split some commits into smaller ones
> > > * separate uhs-2 headers from others
> > > * correct wrong spellings
> > > * fix most of checkpatch warnings/errors
> > > * remove all k[cz]alloc() from the code
> > > * guard sdhci-uhs2 specific code with
> > > 'if (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2))'
> > > * make sdhci-uhs2.c as a module
> > > * trivial changes, including
> > > - rename back sdhci-core.c to sdhci.c
> > > - allow vendor code to disable uhs2 if v4_mode == 0
> > > in __sdhci_add_host()
> > > - merge uhs2_power_up() into mmc_power_up()
> > > - remove flag_uhs2 from mmc_attach_sd()
> > > - add function descriptions to EXPORT'ed functions
> > > - other minor code optimization
> > >
> > > Changes in v2 (Jan. 9, 2020)
> > > * rebased to v5.5-rc5
> > >
> > > AKASHI Takahiro (1):
> > > mmc: sdhci-pci: add UHS-II support framework
> > >
> > > Ulf Hansson (1):
> > > mmc: core: Extend support for mmc regulators with a vqmmc2
> > >
> > > Victor Shih (21):
> > > mmc: core: Cleanup printing of speed mode at card insertion
> > > mmc: core: Prepare to support SD UHS-II cards
> > > mmc: core: Announce successful insertion of an SD UHS-II card
> > > mmc: core: Add definitions for SD UHS-II cards
> > > mmc: core: Support UHS-II card control and access
> > > mmc: sdhci: add UHS-II related definitions in headers
> > > mmc: sdhci: add UHS-II module and add a kernel configuration
> > > mmc: sdhci-uhs2: dump UHS-II registers
> > > mmc: sdhci-uhs2: add reset function and uhs2_mode function
> > > mmc: sdhci-uhs2: add set_power() to support vdd2
> > > mmc: sdhci-uhs2: skip signal_voltage_switch()
> > > mmc: sdhci-uhs2: add set_timeout()
> > > mmc: sdhci-uhs2: add set_ios()
> > > mmc: sdhci-uhs2: add detect_init() to detect the interface
> > > mmc: sdhci-uhs2: add clock operations
> > > mmc: sdhci-uhs2: add uhs2_control() to initialise the interface
> > > mmc: sdhci-uhs2: add request() and others
> > > mmc: sdhci-uhs2: add irq() and others
> > > mmc: sdhci-uhs2: add add_host() and others to set up the driver
> > > mmc: sdhci-uhs2: add pre-detect_init hook
> > > mmc: sdhci-pci-gli: enable UHS-II mode for GL9755
> > >
> > > drivers/mmc/core/Makefile | 2 +-
> > > drivers/mmc/core/block.c | 18 +-
> > > drivers/mmc/core/bus.c | 38 +-
> > > drivers/mmc/core/core.c | 25 +-
> > > drivers/mmc/core/core.h | 1 +
> > > drivers/mmc/core/host.h | 7 +
> > > drivers/mmc/core/mmc_ops.c | 25 +-
> > > drivers/mmc/core/mmc_ops.h | 1 +
> > > drivers/mmc/core/regulator.c | 34 +
> > > drivers/mmc/core/sd.c | 13 +-
> > > drivers/mmc/core/sd.h | 4 +
> > > drivers/mmc/core/sd_ops.c | 11 +
> > > drivers/mmc/core/sd_ops.h | 18 +
> > > drivers/mmc/core/sd_uhs2.c | 1366 +++++++++++++++++++++++++++++
> > > drivers/mmc/host/Kconfig | 10 +
> > > drivers/mmc/host/Makefile | 1 +
> > > drivers/mmc/host/sdhci-pci-core.c | 16 +-
> > > drivers/mmc/host/sdhci-pci-gli.c | 276 +++++-
> > > drivers/mmc/host/sdhci-pci.h | 3 +
> > > drivers/mmc/host/sdhci-uhs2.c | 1350 ++++++++++++++++++++++++++++
> > > drivers/mmc/host/sdhci-uhs2.h | 191 ++++
> > > drivers/mmc/host/sdhci.c | 277 +++---
> > > drivers/mmc/host/sdhci.h | 83 +-
> > > include/linux/mmc/card.h | 36 +
> > > include/linux/mmc/core.h | 13 +
> > > include/linux/mmc/host.h | 89 ++
> > > include/linux/mmc/sd_uhs2.h | 240 +++++
> > > 27 files changed, 3988 insertions(+), 160 deletions(-)
> > > create mode 100644 drivers/mmc/core/sd_uhs2.c
> > > create mode 100644 drivers/mmc/host/sdhci-uhs2.c
> > > create mode 100644 drivers/mmc/host/sdhci-uhs2.h
> > > create mode 100644 include/linux/mmc/sd_uhs2.h
> > >
> > > --
> > > 2.25.1
> > >

Next message: Tarun Sahu: "[PATCH v2] dax/kmem: Pass valid argument to memory_group_register_static"
Previous message: Andi Shyti: "Re: [PATCH v2 2/2] i2c: Add GPIO-based hotplug gate"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]