Re: [PATCH 2/7] thermal: stats: track number of change requests due to tz

[Rafael J. Wysocki]

On Fri, May 19, 2023 at 5:27 AM Eduardo Valentin <evalenti@xxxxxxxxxx> wrote:
>
> From: Eduardo Valentin <eduval@xxxxxxxxxx>
>
> This patch improves the current cooling device
> statistics by adding a new file under
> cdev/stats/requests_of_thermal_zone
>
> to represent the number of times each thermal zone
> requested the cooling device to effectively change.
> If the request associated was not serviced because
> another thermal zone asked for a higher cooling level,
> this counter does not increase.

What if the cdev is associated with two thermal zones asking for the
same state of it?

> The file format is:
> thermal_zone: <type> <count>
>
> Samples:
> $ cat cdev0/stats/requests_of_thermal_zone
> thermal_zone: amb0      2

The "one value per attribute" sysfs rule violation.

>
> In this example, it means the thermal zone 'amb0' has requested
> 2 times for cdev0 to change state.

Like in the previous patch, it would be good to explain the use case.

> Cc: "Rafael J. Wysocki" <rafael@xxxxxxxxxx> (supporter:THERMAL)
> Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx> (supporter:THERMAL)
> Cc: Amit Kucheria <amitk@xxxxxxxxxx> (reviewer:THERMAL)
> Cc: Zhang Rui <rui.zhang@xxxxxxxxx> (reviewer:THERMAL)
> Cc: Jonathan Corbet <corbet@xxxxxxx> (maintainer:DOCUMENTATION)
> Cc: linux-pm@xxxxxxxxxxxxxxx (open list:THERMAL)
> Cc: linux-doc@xxxxxxxxxxxxxxx (open list:DOCUMENTATION)
> Cc: linux-kernel@xxxxxxxxxxxxxxx (open list)
>
> Signed-off-by: Eduardo Valentin <eduval@xxxxxxxxxx>
> ---
>  .../driver-api/thermal/sysfs-api.rst          |  2 +
>  drivers/thermal/thermal_core.h                |  1 +
>  drivers/thermal/thermal_sysfs.c               | 52 +++++++++++++++++++
>  3 files changed, 55 insertions(+)
>
> diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst
> index caa50d61a5bc..75309a51d9b3 100644
> --- a/Documentation/driver-api/thermal/sysfs-api.rst
> +++ b/Documentation/driver-api/thermal/sysfs-api.rst
> @@ -369,6 +369,8 @@ Thermal cooling device sys I/F, created once it's registered::
>      |---stats/trans_table:     Cooling state transition table
>      |---stats/time_in_thermal_zone_ms: Time that this cooling device was driven
>                                  each associated thermal zone.
> +    |---stats/requests_of_thermal_zone:        Total number of times this cooling device
> +                                changed due to each associated thermal zone.

The meaning of the above description is not clear to me.

>
>
>  Then next two dynamic attributes are created/removed in pairs. They represent
> diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
> index 3cce60c6e065..ed6511c3b794 100644
> --- a/drivers/thermal/thermal_core.h
> +++ b/drivers/thermal/thermal_core.h
> @@ -103,6 +103,7 @@ struct thermal_instance {
>         unsigned int weight; /* The weight of the cooling device */
>         bool upper_no_limit;
>  #if IS_ENABLED(CONFIG_THERMAL_STATISTICS)
> +       unsigned long total_requests;
>         ktime_t time_in; /* time spent in this instance */
>  #endif
>  };
> diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
> index a3b71f03db75..0bce1415f7e8 100644
> --- a/drivers/thermal/thermal_sysfs.c
> +++ b/drivers/thermal/thermal_sysfs.c
> @@ -723,6 +723,7 @@ void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
>         stats->trans_table[stats->state * (cdev->max_state + 1) + new_state]++;
>         stats->state = new_state;
>         stats->total_trans++;
> +       stats->curr_instance->total_requests++;
>
>  unlock:
>         spin_unlock(&stats->lock);
> @@ -867,6 +868,54 @@ time_in_thermal_zone_ms_show(struct device *dev, struct device_attribute *attr,
>         return ret < 0 ? ret : len;
>  }
>
> +static ssize_t
> +requests_of_thermal_zone_show(struct device *dev, struct device_attribute *attr,
> +                             char *buf)
> +{
> +       LIST_HEAD(cdev_thermal_zone_list);
> +       struct thermal_cooling_device *cdev = to_cooling_device(dev);
> +       struct cooling_dev_stats *stats = cdev->stats;
> +       struct cdev_thermal_zone_residency *res, *next;
> +       struct thermal_instance *instance;
> +       ssize_t len = 0, ret = 0;
> +
> +       mutex_lock(&cdev->lock);
> +
> +       spin_lock(&stats->lock);
> +       update_time_in_state(stats, stats->curr_instance);
> +       spin_unlock(&stats->lock);
> +
> +       build_cdev_thermal_zone_residency(&cdev_thermal_zone_list, cdev);
> +
> +       list_for_each_entry(instance, &cdev->thermal_instances, cdev_node)
> +               list_for_each_entry(res, &cdev_thermal_zone_list, node)
> +                       if (strncmp(res->thermal_zone, instance->tz->type,
> +                                   THERMAL_NAME_LENGTH) == 0)
> +                               res->counter += instance->total_requests;
> +
> +       mutex_unlock(&cdev->lock);
> +
> +       list_for_each_entry_safe(res, next, &cdev_thermal_zone_list, node) {

Why is the _safe variant needed here?

> +               ret = sprintf(buf + len, "thermal_zone: %s\t%lu\n",
> +                             res->thermal_zone, res->counter);
> +
> +               if (ret == 0)
> +                       ret = -EOVERFLOW;
> +
> +               if (ret < 0)
> +                       break;
> +
> +               len += ret;
> +       }
> +
> +       list_for_each_entry_safe(res, next, &cdev_thermal_zone_list, node) {
> +               list_del(&res->node);
> +               kfree(res);
> +       }
> +
> +       return ret < 0 ? ret : len;

I would prefer

if (ret < 0)
        return ret;

return len;

> +}
> +
>  static ssize_t
>  reset_store(struct device *dev, struct device_attribute *attr, const char *buf,
>             size_t count)
> @@ -897,6 +946,7 @@ reset_store(struct device *dev, struct device_attribute *attr, const char *buf,
>
>         /* Make sure we reset all counters per instance */
>         list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) {
> +               instance->total_requests = 0;
>                 instance->time_in = ktime_set(0, 0);
>         }
>
> @@ -971,6 +1021,7 @@ static ssize_t trans_table_show(struct device *dev,
>  static DEVICE_ATTR_RO(total_trans);
>  static DEVICE_ATTR_RO(time_in_state_ms);
>  static DEVICE_ATTR_RO(time_in_thermal_zone_ms);
> +static DEVICE_ATTR_RO(requests_of_thermal_zone);
>  static DEVICE_ATTR_WO(reset);
>  static DEVICE_ATTR_RO(trans_table);
>
> @@ -978,6 +1029,7 @@ static struct attribute *cooling_device_stats_attrs[] = {
>         &dev_attr_total_trans.attr,
>         &dev_attr_time_in_state_ms.attr,
>         &dev_attr_time_in_thermal_zone_ms.attr,
> +       &dev_attr_requests_of_thermal_zone.attr,
>         &dev_attr_reset.attr,
>         &dev_attr_trans_table.attr,
>         NULL
> --