Re: [PATCH] usb: host: xhci: parameterize Renesas delay/retry

[Greg Kroah-Hartman]

On Sun, Jun 18, 2023 at 10:46:57PM +0000, Anne Macedo wrote:
> Cards based on Renesas uPD720202 have their firmware downloaded during
> boot by xhci-pci. At this step, the status of the firmware is read and
> it takes a while for this read to happen (up to a few seconds). The
> macros RENESAS_RETRY and RENESAS_DELAY are used to retry reading this
> status byte from PCI a few times. If it can't read the status byte in
> RENESAS_RETRY tries, it times out.
> 
> However, since this may vary from card to card, these retry and delay
> values need to be tweaked. In order to avoid having to patch the code to
> change these values, CONFIG_USB_XHCI_PCI_RENESAS_RETRY and
> CONFIG_USB_XHCI_PCI_RENESAS_DELAY are introduced.

No, a build-time option that affects all devices controlled by this
driver is not how you handle this, sorry.

Make this a dynamic value, either determined automatically by the device
itself (as you know what device is being controlled), or worst case, a
sysfs attribute that you can modify if things are not working properly.

But a build-time option will never work, as it will never be changed,
and it would not allow for multiple devices in the system that are
different.

thanks,

greg k-h