[PATCH v14 01/18] dt-bindings: i2c: Add I2C Address Translator (ATR)

From: Tomi Valkeinen
Date: Fri Jun 16 2023 - 10:00:18 EST


Add bindings for I2C Address Translator. Only one property is added,
'i2c-alias-pool', which can be used in the bindings for the device that
supports ATR.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
Acked-by: Wolfram Sang <wsa@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/i2c/i2c-atr.yaml | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-atr.yaml

diff --git a/Documentation/devicetree/bindings/i2c/i2c-atr.yaml b/Documentation/devicetree/bindings/i2c/i2c-atr.yaml
new file mode 100644
index 000000000000..1939ab339bfc
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-atr.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-atr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common i2c address translator properties
+
+maintainers:
+ - Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
+
+description:
+ An I2C Address Translator (ATR) is a device with an I2C slave parent
+ ("upstream") port and N I2C master child ("downstream") ports, and
+ forwards transactions from upstream to the appropriate downstream port
+ with a modified slave address. The address used on the parent bus is
+ called the "alias" and is (potentially) different from the physical
+ slave address of the child bus. Address translation is done by the
+ hardware.
+
+properties:
+ i2c-alias-pool:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ I2C alias pool is a pool of I2C addresses on the main I2C bus that can be
+ used to access the remote peripherals on the serializer's I2C bus. The
+ addresses must be available, not used by any other peripheral. Each
+ remote peripheral is assigned an alias from the pool, and transactions to
+ that address will be forwarded to the remote peripheral, with the address
+ translated to the remote peripheral's real address. This property is not
+ needed if there are no I2C addressable remote peripherals.
+
+additionalProperties: true
+...
--
2.34.1