[PATCH net-next v1 13/14] net: phy: nxp-c45-tja11xx: reset PCS if the link goes down

[Radu Pirea (NXP OSS)]

During PTP testing on early TJA1120 engineering samples I observed that
if the link is lost and recovered, the tx timestamps will be randomly
lost. To avoid this HW issue, the PCS should be reseted.

Resetting the PCS will break the link and we should reset the PCS on
LINK UP -> LINK DOWN transition, otherwise we will trigger and infinite
loop of LINK UP -> LINK DOWN events.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@xxxxxxxxxxx>
---
 drivers/net/phy/nxp-c45-tja11xx.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c
index 0ed96d696bad..0d22eb7534dc 100644
--- a/drivers/net/phy/nxp-c45-tja11xx.c
+++ b/drivers/net/phy/nxp-c45-tja11xx.c
@@ -56,6 +56,9 @@
 #define VEND1_PHY_CONFIG		0x8108
 #define PHY_CONFIG_AUTO			BIT(0)
 
+#define TJA1120_EPHY_RESETS		0x810A
+#define EPHY_PCS_RESET			BIT(3)
+
 #define VEND1_SIGNAL_QUALITY		0x8320
 #define SQI_VALID			BIT(14)
 #define SQI_MASK			GENMASK(2, 0)
@@ -1325,6 +1328,28 @@ static int nxp_c45_get_sqi(struct phy_device *phydev)
 	return reg;
 }
 
+static int tja1120_read_status(struct phy_device *phydev)
+{
+	unsigned int link = phydev->link;
+	int ret;
+
+	ret = genphy_c45_read_status(phydev);
+	if (ret)
+		return ret;
+
+	/* Bug workaround for TJA1120 enegineering samples: fix egress
+	 * timestamps lost after link recovery.
+	 */
+	if (link && !phydev->link) {
+		phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
+				 TJA1120_EPHY_RESETS, EPHY_PCS_RESET);
+		phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+				   TJA1120_EPHY_RESETS, EPHY_PCS_RESET);
+	}
+
+	return ret;
+}
+
 static int nxp_c45_get_sqi_max(struct phy_device *phydev)
 {
 	return MAX_SQI;
@@ -1879,7 +1904,7 @@ static struct phy_driver nxp_c45_driver[] = {
 		.config_init		= nxp_c45_config_init,
 		.config_intr		= tja1120_config_intr,
 		.handle_interrupt	= nxp_c45_handle_interrupt,
-		.read_status		= genphy_c45_read_status,
+		.read_status		= tja1120_read_status,
 		.suspend		= genphy_c45_pma_suspend,
 		.resume			= genphy_c45_pma_resume,
 		.get_sset_count		= nxp_c45_get_sset_count,
-- 
2.34.1