[PATCH net-next] dt-bindings: net: phy: gpy2xx: more precise description

[Michael Walle]

Mention that the interrupt line is just asserted for a random period of
time, not the entire time.

Suggested-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Michael Walle <mwalle@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
index d71fa9de2b64..8a3713abd1ca 100644
--- a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
+++ b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
@@ -17,11 +17,12 @@ properties:
   maxlinear,use-broken-interrupts:
     description: |
       Interrupts are broken on some GPY2xx PHYs in that they keep the
-      interrupt line asserted even after the interrupt status register is
-      cleared. Thus it is blocking the interrupt line which is usually bad
-      for shared lines. By default interrupts are disabled for this PHY and
-      polling mode is used. If one can live with the consequences, this
-      property can be used to enable interrupt handling.
+      interrupt line asserted for a random amount of time even after the
+      interrupt status register is cleared. Thus it is blocking the
+      interrupt line which is usually bad for shared lines. By default,
+      interrupts are disabled for this PHY and polling mode is used. If one
+      can live with the consequences, this property can be used to enable
+      interrupt handling.
 
       Affected PHYs (as far as known) are GPY215B and GPY215C.
     type: boolean

---
base-commit: f7efed9f38f886edb450041b82a6f15d663c98f8
change-id: 20230616-feature-maxlinear-dt-better-irq-desc-fd31aee6641c