Re: [PATCH v4] pinctrl: intel: refine ->irq_set_type() hook

From: Andy Shevchenko
Date: Thu Jun 15 2023 - 09:15:25 EST


On Thu, Jun 15, 2023 at 06:20:22PM +0530, Raag Jadav wrote:
> Refine ->irq_set_type() hook and improve its readability by:
>
> - Reducing scope of spinlock by moving unneeded operations out of it.
> - Dropping redundant PADCFG0_RXEVCFG_SHIFT and including it directly
> into PADCFG0_RXEVCFG_* definitions.
> - Utilizing temporary variables for common operations.
> - Simplifying if-else-if chain.

Two questions out of curiosity.
Do we gain or lose bytes with this?

> Signed-off-by: Raag Jadav <raag.jadav@xxxxxxxxx>
> ---
> drivers/pinctrl/intel/pinctrl-intel.c | 45 ++++++++++++++-------------
> 1 file changed, 24 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
> index e8adf2580321..036eae74c479 100644
> --- a/drivers/pinctrl/intel/pinctrl-intel.c
> +++ b/drivers/pinctrl/intel/pinctrl-intel.c
> @@ -55,12 +55,11 @@
>
> /* Offset from pad_regs */
> #define PADCFG0 0x000
> -#define PADCFG0_RXEVCFG_SHIFT 25
> #define PADCFG0_RXEVCFG_MASK GENMASK(26, 25)
> -#define PADCFG0_RXEVCFG_LEVEL 0
> -#define PADCFG0_RXEVCFG_EDGE 1
> -#define PADCFG0_RXEVCFG_DISABLED 2
> -#define PADCFG0_RXEVCFG_EDGE_BOTH 3
> +#define PADCFG0_RXEVCFG_LEVEL (0 << 25)
> +#define PADCFG0_RXEVCFG_EDGE (1 << 25)
> +#define PADCFG0_RXEVCFG_DISABLED (2 << 25)
> +#define PADCFG0_RXEVCFG_EDGE_BOTH (3 << 25)
> #define PADCFG0_PREGFRXSEL BIT(24)
> #define PADCFG0_RXINV BIT(23)
> #define PADCFG0_GPIROUTIOXAPIC BIT(20)
> @@ -1127,9 +1126,9 @@ static int intel_gpio_irq_type(struct irq_data *d, unsigned int type)
> struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> struct intel_pinctrl *pctrl = gpiochip_get_data(gc);
> unsigned int pin = intel_gpio_to_pin(pctrl, irqd_to_hwirq(d), NULL, NULL);
> + u32 rxevcfg, rxinv, value;
> unsigned long flags;
> void __iomem *reg;
> - u32 value;
>
> reg = intel_get_padcfg(pctrl, pin, PADCFG0);
> if (!reg)
> @@ -1145,28 +1144,32 @@ static int intel_gpio_irq_type(struct irq_data *d, unsigned int type)
> return -EPERM;
> }
>
> - raw_spin_lock_irqsave(&pctrl->lock, flags);
> -
> - intel_gpio_set_gpio_mode(reg);
> -
> - value = readl(reg);
> -
> - value &= ~(PADCFG0_RXEVCFG_MASK | PADCFG0_RXINV);
> -
> if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
> - value |= PADCFG0_RXEVCFG_EDGE_BOTH << PADCFG0_RXEVCFG_SHIFT;
> + rxevcfg = PADCFG0_RXEVCFG_EDGE_BOTH;
> } else if (type & IRQ_TYPE_EDGE_FALLING) {
> - value |= PADCFG0_RXEVCFG_EDGE << PADCFG0_RXEVCFG_SHIFT;
> - value |= PADCFG0_RXINV;
> + rxevcfg = PADCFG0_RXEVCFG_EDGE;
> } else if (type & IRQ_TYPE_EDGE_RISING) {
> - value |= PADCFG0_RXEVCFG_EDGE << PADCFG0_RXEVCFG_SHIFT;
> + rxevcfg = PADCFG0_RXEVCFG_EDGE;
> } else if (type & IRQ_TYPE_LEVEL_MASK) {
> - if (type & IRQ_TYPE_LEVEL_LOW)
> - value |= PADCFG0_RXINV;
> + rxevcfg = PADCFG0_RXEVCFG_LEVEL;
> } else {
> - value |= PADCFG0_RXEVCFG_DISABLED << PADCFG0_RXEVCFG_SHIFT;
> + rxevcfg = PADCFG0_RXEVCFG_DISABLED;
> }
>
> + if (type == IRQ_TYPE_EDGE_FALLING || type == IRQ_TYPE_LEVEL_LOW)
> + rxinv = PADCFG0_RXINV;
> + else
> + rxinv = 0;
> +
> + raw_spin_lock_irqsave(&pctrl->lock, flags);
> +
> + intel_gpio_set_gpio_mode(reg);
> +
> + value = readl(reg);

> + value = (value & ~PADCFG0_RXINV) | rxinv;
> + value = (value & ~PADCFG0_RXEVCFG_MASK) | rxevcfg;

Same question if we change this to be similar to the current code, i.e.

value = readl(reg);

value &= ~(PADCFG0_RXEVCFG_MASK | PADCFG0_RXINV);
value |= rxevcfg;
value |= rxinv;

And I would keep blank lines after readl() and before writel() since we have
more than a single line in between.

> writel(value, reg);
>
> if (type & IRQ_TYPE_EDGE_BOTH)
>
> base-commit: e95433c367e681dc6d4613706bd74f483a25acd8
> --
> 2.17.1
>

--
With Best Regards,
Andy Shevchenko