[PATCH] PCI/ASPM: Enable ASPM on external PCIe devices

[Kai-Heng Feng]

When a PCIe device is hotplugged to a Thunderbolt port, ASPM is not
enabled for that device. However, when the device is plugged preboot,
ASPM is enabled by default.

The disparity happens because BIOS doesn't have the ability to program
ASPM on hotplugged devices.

So enable ASPM by default for external connected PCIe devices so ASPM
settings are consitent between preboot and hotplugged.

On HP Thunderbolt Dock G4, enable ASPM can also fix BadDLLP error:
pcieport 0000:00:1d.0: AER: Corrected error received: 0000:07:04.0
pcieport 0000:07:04.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
pcieport 0000:07:04.0:   device [8086:0b26] error status/mask=00000080/00002000
pcieport 0000:07:04.0:    [ 7] BadDLLP

The root cause is still unclear, but quite likely because the I225 on
the dock supports PTM, where ASPM timing is precalculated for the PTM.

Cc: Mario Limonciello <mario.limonciello@xxxxxxx>
Cc: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217557
Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
---
 drivers/pci/pcie/aspm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 66d7514ca111..613b0754c9bb 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -119,7 +119,9 @@ static int policy_to_aspm_state(struct pcie_link_state *link)
 		/* Enable Everything */
 		return ASPM_STATE_ALL;
 	case POLICY_DEFAULT:
-		return link->aspm_default;
+		return dev_is_removable(&link->downstream->dev) ?
+			link->aspm_capable :
+			link->aspm_default;
 	}
 	return 0;
 }
-- 
2.34.1