Re: [PATCH v2 12/15] soc: mediatek: Add MT8188 VDO1 reset bit map

[Shawn Sung (宋孝謙)]

Hi Angelo,

Got it. Will fix this in the next version.

Added a new define in mtk-mmsys.h:
#define MMSYS_RST_NR(bank, bit) ((bank * 32) + bit)

And define the reset table as:
static const u8 mmsys_mt8188_vdo1_rst_tb[] = {
        [MT8188_VDO1_RST_SMI_LARB2]           = MMSYS_RST_NR(0, 0),
        ...
        [MT8188_VDO1_RST_VPP_MERGE2]          = MMSYS_RST_NR(0, 11),
        [MT8188_VDO1_RST_VPP_MERGE3]          = MMSYS_RST_NR(1, 0),
        ...
        [MT8188_VDO1_RST_DISP_RSZ3]           = MMSYS_RST_NR(1, 31),
        [MT8188_VDO1_RST_HDR_VDO_FE0]         = MMSYS_RST_NR(2, 0),
    
...
        [MT8188_VDO1_RST_HDR_VDO_BE_DL_ASYNC] = MMSYS_RST_NR(2, 23),
};

Thanks,
Hsiao Chien Sung

On Wed, 2023-06-14 at 13:35 +0200, AngeloGioacchino Del Regno wrote:
>  	 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>  Il 14/06/23 09:31, Hsiao Chien Sung ha scritto:
> > Add MT8188 VDO1 reset bit map.
> > 
> > Signed-off-by: Hsiao Chien Sung <shawn.sung@xxxxxxxxxxxx>
> > ---
> >   drivers/soc/mediatek/mt8188-mmsys.h | 57
> +++++++++++++++++++++++++++++
> >   drivers/soc/mediatek/mtk-mmsys.c    |  3 +-
> >   2 files changed, 59 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/soc/mediatek/mt8188-mmsys.h
> b/drivers/soc/mediatek/mt8188-mmsys.h
> > index c3e3c5cfe931..208d4dfedc1a 100644
> > --- a/drivers/soc/mediatek/mt8188-mmsys.h
> > +++ b/drivers/soc/mediatek/mt8188-mmsys.h
> > @@ -144,6 +144,63 @@ static const u8 mmsys_mt8188_vdo0_rst_tb[] = {
> >   [MT8188_VDO0_RST_DISP_RSZ0]= 31,
> >   };
> > 
> > +static const u8 mmsys_mt8188_vdo1_rst_tb[] = {
> > +[MT8188_VDO1_RST_SMI_LARB2]= 0,
> > +[MT8188_VDO1_RST_SMI_LARB3]= 1,
> > +[MT8188_VDO1_RST_GALS]= 2,
> > +[MT8188_VDO1_RST_FAKE_ENG0]= 3,
> > +[MT8188_VDO1_RST_FAKE_ENG1]= 4,
> > +[MT8188_VDO1_RST_MDP_RDMA0]= 5,
> > +[MT8188_VDO1_RST_MDP_RDMA1]= 6,
> > +[MT8188_VDO1_RST_MDP_RDMA2]= 7,
> > +[MT8188_VDO1_RST_MDP_RDMA3]= 8,
> > +[MT8188_VDO1_RST_VPP_MERGE0]= 9,
> > +[MT8188_VDO1_RST_VPP_MERGE1]= 10,
> > +[MT8188_VDO1_RST_VPP_MERGE2]= 11,
> > +[MT8188_VDO1_RST_VPP_MERGE3]= 32 + 0,
> 
> Works, but there's a better way.
> 
> 32 + 0 means that you're using reset SW1 register, so you can do
> 
> #define MT8188_MMSYS_RST_NR_PER_BANK32
> #define MT8188_RST_SW1_OFFSETMT8188_MMSYS_RST_NR_PER_BANK
> #define MT8188_RST_SW2_OFFSETMT8188_MMSYS_RST_NR_PER_BANK * 2
> 
> [MT8188_VDO1_RST_VPP_MERGE3] = MT8188_RST_SW1_OFFSET + 0
> [MT8188_VDO1_RST_VPP_MERGE4] = MT8188_RST_SW1_OFFSET + 0
> .......
> [MT8188_VDO1_RST_HDR_VDO_FE0] = MT8188_RST_SW2_OFFSET + 0
> ...etc
> 
> Reading this will make it clear that a certain reset bit is in a
> different
> (sequential or not) register.
> 
> P.S.: If the RST_NR_PER_BANK is *not* MT8188 specific (as in, all
> reset registers
> for all SoCs are always 32 bits, which I believe is true), you could
> move that
> definition to mtk-mmsys.h as
>        #define MMSYS_RST_NR_PER_BANK32
> and then define the offsets in mt8188-mmsys.h as
>        #define MT8188_RST_SW1_OFFSET MMSYS_RST_NR_PER_BANK
>        .... etc
> 
> Thanks,
> Angelo
> 
>