Re: [PATCH 7/9] regulator: mt6358: Add output voltage fine tuning to fixed regulators

[Mark Brown]

On Fri, Jun 09, 2023 at 04:30:04PM +0800, Chen-Yu Tsai wrote:
> The "fixed" LDO regulators found on the MT6358 and MT6366 PMICs have
> either no voltage selection register, or only one valid setting.
> However these do have a fine voltage calibration setting that can
> slightly boost the output voltage from 0 mV to 100 mV, in 10 mV
> increments.

This and the followup patch break the build on both arm64 and x86_64:

/build/stage/linux/drivers/regulator/mt6358-regulator.c:127:29: error: ‘MT6358_VFE28_ANA_CON0’ undeclared here (not in a function); did you mean ‘MT6358_VIO28_ANA_CON0’?
  127 |                 .vsel_reg = MT6358_##vreg##_ANA_CON0,   \
      |                             ^~~~~~~
/build/stage/linux/drivers/regulator/mt6358-regulator.c:525:9: note: in expansion of macro ‘MT6358_REG_FIXED’
  525 |         MT6358_REG_FIXED("ldo_vfe28", VFE28, MT6358_LDO_VFE28_CON0, 0, 2800000),
      |         ^~~~~~~~~~~~~~~~
/build/stage/linux/drivers/regulator/mt6358-regulator.c:127:29: error: ‘MT6358_VCN28_ANA_CON0’ undeclared here (not in a function); did you mean ‘MT6358_VCN18_ANA_CON0’?
  127 |                 .vsel_reg = MT6358_##vreg##_ANA_CON0,   \
      |                             ^~~~~~~
/build/stage/linux/drivers/regulator/mt6358-regulator.c:526:9: note: in expansion of macro ‘MT6358_REG_FIXED’
  526 |         MT6358_REG_FIXED("ldo_vcn28", VCN28, MT6358_LDO_VCN28_CON0, 0, 2800000),
      |         ^~~~~~~~~~~~~~~~
/build/stage/linux/drivers/regulator/mt6358-regulator.c:127:29: error: ‘MT6358_VXO22_ANA_CON0’ undeclared here (not in a function); did you mean ‘MT6358_VIO28_ANA_CON0’?
  127 |                 .vsel_reg = MT6358_##vreg##_ANA_CON0,   \
      |                             ^~~~~~~
/build/stage/linux/drivers/regulator/mt6358-regulator.c:527:9: note: in expansion of macro ‘MT6358_REG_FIXED’
  527 |         MT6358_REG_FIXED("ldo_vxo22", VXO22, MT6358_LDO_VXO22_CON0, 0, 2200000),
      |         ^~~~~~~~~~~~~~~~
/build/stage/linux/drivers/regulator/mt6358-regulator.c:127:29: error: ‘MT6358_VAUX18_ANA_CON0’ undeclared here (not in a function); did you mean ‘MT6358_VRF18_ANA_CON0’?
  127 |                 .vsel_reg = MT6358_##vreg##_ANA_CON0,   \
      |                             ^~~~~~~
/build/stage/linux/drivers/regulator/mt6358-regulator.c:528:9: note: in expansion of macro ‘MT6358_REG_FIXED’
  528 |         MT6358_REG_FIXED("ldo_vaux18", VAUX18,
      |         ^~~~~~~~~~~~~~~~
/build/stage/linux/drivers/regulator/mt6358-regulator.c:127:29: error: ‘MT6358_VBIF28_ANA_CON0’ undeclared here (not in a function); did you mean ‘MT6358_VIO28_ANA_CON0’?
  127 |                 .vsel_reg = MT6358_##vreg##_ANA_CON0,   \
      |                             ^~~~~~~
/build/stage/linux/drivers/regulator/mt6358-regulator.c:530:9: note: in expansion of macro ‘MT6358_REG_FIXED’
  530 |         MT6358_REG_FIXED("ldo_vbif28", VBIF28,
      |         ^~~~~~~~~~~~~~~~
/build/stage/linux/drivers/regulator/mt6358-regulator.c:127:29: error: ‘MT6358_VAUD28_ANA_CON0’ undeclared here (not in a function); did you mean ‘MT6358_VA12_ANA_CON0’?
  127 |                 .vsel_reg = MT6358_##vreg##_ANA_CON0,   \
      |                             ^~~~~~~
/build/stage/linux/drivers/regulator/mt6358-regulator.c:535:9: note: in expansion of macro ‘MT6358_REG_FIXED’
  535 |         MT6358_REG_FIXED("ldo_vaud28", VAUD28,
      |         ^~~~~~~~~~~~~~~~

Attachment: signature.asc
Description: PGP signature