[PATCH v9 9/9] drm/etnaviv: Clean up etnaviv_pdev_probe() function

[Sui Jingfeng]

From: Sui Jingfeng <suijingfeng@xxxxxxxxxxx>

Add a dedicate function to do the DMA configuration to the virtual master.
Also replace the &pdev->dev with dev.

Signed-off-by: Sui Jingfeng <suijingfeng@xxxxxxxxxxx>
---
 drivers/gpu/drm/etnaviv/etnaviv_drv.c | 65 +++++++++++++++------------
 1 file changed, 36 insertions(+), 29 deletions(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_drv.c b/drivers/gpu/drm/etnaviv/etnaviv_drv.c
index 0ee7f641cee3..df4c21a17d9d 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_drv.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_drv.c
@@ -54,6 +54,40 @@ static bool etnaviv_is_dma_coherent(struct device *dev)
 	return coherent;
 }
 
+static int etnaviv_of_dma_configure(struct device *dev)
+{
+	struct device_node *first_node;
+
+	/*
+	 * PTA and MTLB can have 40 bit base addresses, but
+	 * unfortunately, an entry in the MTLB can only point to a
+	 * 32 bit base address of a STLB. Moreover, to initialize the
+	 * MMU we need a command buffer with a 32 bit address because
+	 * without an MMU there is only an indentity mapping between
+	 * the internal 32 bit addresses and the bus addresses.
+	 *
+	 * To make things easy, we set the dma_coherent_mask to 32
+	 * bit to make sure we are allocating the command buffers and
+	 * TLBs in the lower 4 GiB address space.
+	 */
+	if (dma_set_mask(dev, DMA_BIT_MASK(40)) ||
+	    dma_set_coherent_mask(dev, DMA_BIT_MASK(32))) {
+		dev_err(dev, "No suitable DMA available\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Apply the same DMA configuration to the virtual etnaviv
+	 * device as the GPU we found. This assumes that all Vivante
+	 * GPUs in the system share the same DMA constraints.
+	 */
+	first_node = etnaviv_of_first_available_node();
+	if (first_node)
+		of_dma_configure(dev, first_node, true);
+
+	return 0;
+}
+
 /*
  * etnaviv private data construction and destructions:
  */
@@ -663,7 +697,6 @@ static const struct component_master_ops etnaviv_master_ops = {
 static int etnaviv_pdev_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *first_node = NULL;
 	struct component_match *match = NULL;
 
 	if (!dev->platform_data) {
@@ -673,10 +706,7 @@ static int etnaviv_pdev_probe(struct platform_device *pdev)
 			if (!of_device_is_available(core_node))
 				continue;
 
-			if (!first_node)
-				first_node = core_node;
-
-			drm_of_component_match_add(&pdev->dev, &match,
+			drm_of_component_match_add(dev, &match,
 						   component_compare_of, core_node);
 		}
 	} else {
@@ -687,31 +717,8 @@ static int etnaviv_pdev_probe(struct platform_device *pdev)
 			component_match_add(dev, &match, component_compare_dev_name, names[i]);
 	}
 
-	/*
-	 * PTA and MTLB can have 40 bit base addresses, but
-	 * unfortunately, an entry in the MTLB can only point to a
-	 * 32 bit base address of a STLB. Moreover, to initialize the
-	 * MMU we need a command buffer with a 32 bit address because
-	 * without an MMU there is only an indentity mapping between
-	 * the internal 32 bit addresses and the bus addresses.
-	 *
-	 * To make things easy, we set the dma_coherent_mask to 32
-	 * bit to make sure we are allocating the command buffers and
-	 * TLBs in the lower 4 GiB address space.
-	 */
-	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(40)) ||
-	    dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) {
-		dev_dbg(&pdev->dev, "No suitable DMA available\n");
+	if (etnaviv_of_dma_configure(dev))
 		return -ENODEV;
-	}
-
-	/*
-	 * Apply the same DMA configuration to the virtual etnaviv
-	 * device as the GPU we found. This assumes that all Vivante
-	 * GPUs in the system share the same DMA constraints.
-	 */
-	if (first_node)
-		of_dma_configure(&pdev->dev, first_node, true);
 
 	return component_master_add_with_match(dev, &etnaviv_master_ops, match);
 }
-- 
2.25.1