linux-next: manual merge of the net-next tree with the net tree

From: Stephen Rothwell
Date: Tue Jun 13 2023 - 21:18:04 EST

Next message: Liam R. Howlett: "Re: inconsistence in mprotect_fixup mlock_fixup madvise_update_vma"
Previous message: Bagas Sanjaya: "Fwd: Dell XPS 13 ath10k_pci firmware crashed!"
Next in thread: Matthieu Baerts: "Re: linux-next: manual merge of the net-next tree with the net tree"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi all,

Today's linux-next merge of the net-next tree got a conflict in:

tools/testing/selftests/net/mptcp/mptcp_join.sh

between commits:

47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")
425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not")

from the net tree and commits:

45b1a1227a7a ("mptcp: introduces more address related mibs")
0639fa230a21 ("selftests: mptcp: add explicit check for new mibs")

from the net-next tree.

I fixed it up (I think - see below) and can carry the fix as necessary.
This is now fixed as far as linux-next is concerned, but any non trivial
conflicts should be mentioned to your upstream maintainer when your tree
is submitted for merging. You may also want to consider cooperating
with the maintainer of the conflicting tree to minimise any particularly
complex conflicts.

--
Cheers,
Stephen Rothwell

diff --cc tools/testing/selftests/net/mptcp/mptcp_join.sh
index 0ae8cafde439,85474e029784..000000000000
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@@ -1360,27 -1265,23 +1355,25 @@@ chk_fclose_nr(
fi

printf "%-${nr_blank}s %s" " " "ctx"
- count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPFastcloseTx | awk '{print $2}')
- [ -z "$count" ] && count=0
- [ "$count" != "$fclose_tx" ] && extra_msg="$extra_msg,tx=$count"
- if [ "$count" != "$fclose_tx" ]; then
+ count=$(get_counter ${ns_tx} "MPTcpExtMPFastcloseTx")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" != "$fclose_tx" ]; then
+ extra_msg="$extra_msg,tx=$count"
echo "[fail] got $count MP_FASTCLOSE[s] TX expected $fclose_tx"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi

echo -n " - fclzrx"
- count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPFastcloseRx | awk '{print $2}')
- [ -z "$count" ] && count=0
- [ "$count" != "$fclose_rx" ] && extra_msg="$extra_msg,rx=$count"
- if [ "$count" != "$fclose_rx" ]; then
+ count=$(get_counter ${ns_rx} "MPTcpExtMPFastcloseRx")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" != "$fclose_rx" ]; then
+ extra_msg="$extra_msg,rx=$count"
echo "[fail] got $count MP_FASTCLOSE[s] RX expected $fclose_rx"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
@@@ -1408,25 -1306,21 +1398,23 @@@ chk_rst_nr(
fi

printf "%-${nr_blank}s %s" " " "rtx"
- count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPRstTx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ $count -lt $rst_tx ]; then
+ count=$(get_counter ${ns_tx} "MPTcpExtMPRstTx")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ $count -lt $rst_tx ]; then
echo "[fail] got $count MP_RST[s] TX expected $rst_tx"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi

echo -n " - rstrx "
- count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPRstRx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" -lt "$rst_rx" ]; then
+ count=$(get_counter ${ns_rx} "MPTcpExtMPRstRx")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" -lt "$rst_rx" ]; then
echo "[fail] got $count MP_RST[s] RX expected $rst_rx"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
@@@ -1441,28 -1333,23 +1427,25 @@@ chk_infi_nr(
local infi_tx=$1
local infi_rx=$2
local count
- local dump_stats

printf "%-${nr_blank}s %s" " " "itx"
- count=$(ip netns exec $ns2 nstat -as | grep InfiniteMapTx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$infi_tx" ]; then
+ count=$(get_counter ${ns2} "MPTcpExtInfiniteMapTx")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" != "$infi_tx" ]; then
echo "[fail] got $count infinite map[s] TX expected $infi_tx"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi

echo -n " - infirx"
- count=$(ip netns exec $ns1 nstat -as | grep InfiniteMapRx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$infi_rx" ]; then
+ count=$(get_counter ${ns1} "MPTcpExtInfiniteMapRx")
+ if [ -z "$count" ]; then
+ echo "[skip]"
+ elif [ "$count" != "$infi_rx" ]; then
echo "[fail] got $count infinite map[s] RX expected $infi_rx"
fail_test
- dump_stats=1
else
echo "[ ok ]"
fi
@@@ -1491,13 -1375,11 +1471,12 @@@ chk_join_nr(
fi

printf "%03u %-36s %s" "${TEST_COUNT}" "${title}" "syn"
- count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinSynRx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$syn_nr" ]; then
+ count=$(get_counter ${ns1} "MPTcpExtMPJoinSynRx")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" != "$syn_nr" ]; then
echo "[fail] got $count JOIN[s] syn expected $syn_nr"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
@@@ -1523,13 -1403,11 +1501,12 @@@
fi

echo -n " - ack"
- count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinAckRx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$ack_nr" ]; then
+ count=$(get_counter ${ns1} "MPTcpExtMPJoinAckRx")
+ if [ -z "$count" ]; then
+ echo "[skip]"
+ elif [ "$count" != "$ack_nr" ]; then
echo "[fail] got $count JOIN[s] ack expected $ack_nr"
fail_test
- dump_stats=1
else
echo "[ ok ]"
fi
@@@ -1599,40 -1475,35 +1574,37 @@@ chk_add_nr(
timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout)

printf "%-${nr_blank}s %s" " " "add"
- count=$(ip netns exec $ns2 nstat -as MPTcpExtAddAddr | grep MPTcpExtAddAddr | awk '{print $2}')
- [ -z "$count" ] && count=0
-
+ count=$(get_counter ${ns2} "MPTcpExtAddAddr")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
# if the test configured a short timeout tolerate greater then expected
# add addrs options, due to retransmissions
- if [ "$count" != "$add_nr" ] && { [ "$timeout" -gt 1 ] || [ "$count" -lt "$add_nr" ]; }; then
+ elif [ "$count" != "$add_nr" ] && { [ "$timeout" -gt 1 ] || [ "$count" -lt "$add_nr" ]; }; then
echo "[fail] got $count ADD_ADDR[s] expected $add_nr"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi

echo -n " - echo "
- count=$(ip netns exec $ns1 nstat -as MPTcpExtEchoAdd | grep MPTcpExtEchoAdd | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$echo_nr" ]; then
+ count=$(get_counter ${ns1} "MPTcpExtEchoAdd")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" != "$echo_nr" ]; then
echo "[fail] got $count ADD_ADDR echo[s] expected $echo_nr"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi

if [ $port_nr -gt 0 ]; then
echo -n " - pt "
- count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtPortAdd | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$port_nr" ]; then
+ count=$(get_counter ${ns2} "MPTcpExtPortAdd")
+ if [ -z "$count" ]; then
+ echo "[skip]"
+ elif [ "$count" != "$port_nr" ]; then
echo "[fail] got $count ADD_ADDR[s] with a port-number expected $port_nr"
fail_test
- dump_stats=1
else
echo "[ ok ]"
fi
@@@ -1737,13 -1633,11 +1734,12 @@@ chk_rm_nr(
fi

printf "%-${nr_blank}s %s" " " "rm "
- count=$(ip netns exec $addr_ns nstat -as MPTcpExtRmAddr | grep MPTcpExtRmAddr | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$rm_addr_nr" ]; then
+ count=$(get_counter ${addr_ns} "MPTcpExtRmAddr")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" != "$rm_addr_nr" ]; then
echo "[fail] got $count RM_ADDR[s] expected $rm_addr_nr"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
@@@ -1767,12 -1661,12 +1763,10 @@@
else
echo "[fail] got $count RM_SUBFLOW[s] expected in range [$rm_subflow_nr:$((rm_subflow_nr*2))]"
fail_test
- dump_stats=1
fi
- return
- fi
- if [ "$count" != "$rm_subflow_nr" ]; then
+ elif [ "$count" != "$rm_subflow_nr" ]; then
echo "[fail] got $count RM_SUBFLOW[s] expected $rm_subflow_nr"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
@@@ -1787,28 -1696,23 +1796,25 @@@ chk_prio_nr(
local mp_prio_nr_tx=$1
local mp_prio_nr_rx=$2
local count
- local dump_stats

printf "%-${nr_blank}s %s" " " "ptx"
- count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioTx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$mp_prio_nr_tx" ]; then
+ count=$(get_counter ${ns1} "MPTcpExtMPPrioTx")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" != "$mp_prio_nr_tx" ]; then
echo "[fail] got $count MP_PRIO[s] TX expected $mp_prio_nr_tx"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi

echo -n " - prx "
- count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioRx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$mp_prio_nr_rx" ]; then
+ count=$(get_counter ${ns1} "MPTcpExtMPPrioRx")
+ if [ -z "$count" ]; then
+ echo "[skip]"
+ elif [ "$count" != "$mp_prio_nr_rx" ]; then
echo "[fail] got $count MP_PRIO[s] RX expected $mp_prio_nr_rx"
fail_test
- dump_stats=1
else
echo "[ ok ]"
fi
@@@ -2394,12 -2290,8 +2399,13 @@@ remove_tests(
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
chk_join_nr 3 3 3
+ chk_rm_tx_nr 0
- chk_rm_nr 0 3 simult
+
+ if mptcp_lib_kversion_ge 5.18; then
+ chk_rm_nr 0 3 simult
+ else
+ chk_rm_nr 3 3
+ fi
fi

# addresses flush

Attachment: pgpGJ6d7l0AFG.pgp
Description: OpenPGP digital signature

Next message: Liam R. Howlett: "Re: inconsistence in mprotect_fixup mlock_fixup madvise_update_vma"
Previous message: Bagas Sanjaya: "Fwd: Dell XPS 13 ath10k_pci firmware crashed!"
Next in thread: Matthieu Baerts: "Re: linux-next: manual merge of the net-next tree with the net tree"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]