Re: [PATCH v4 08/22] interconnect: qcom: smd-rpm: Add rpmcc handling skeleton code

[Stephan Gerhold]

On Tue, Jun 13, 2023 at 04:03:08PM +0200, Konrad Dybcio wrote:
> Introduce qcom_icc_rpm_set_bus_rate() in preparation for handling RPM
> clock resources within the interconnect framework. This lets us greatly
> simplify all of the code handling, as setting the rate comes down to:
> 
> u32 rate_khz = max(clk.sleep_rate, clk.active_rate, clk_a.active_rate)
> write_to_rpm(clock.description, rate_khz);
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
>  drivers/interconnect/qcom/icc-rpm.h | 15 +++++++++++++++
>  drivers/interconnect/qcom/smd-rpm.c | 22 ++++++++++++++++++++++
>  2 files changed, 37 insertions(+)
> 
> diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
> index 9ec90e13bfbd..13ca0818ffbd 100644
> --- a/drivers/interconnect/qcom/icc-rpm.h
> +++ b/drivers/interconnect/qcom/icc-rpm.h
> @@ -22,6 +22,18 @@ enum qcom_icc_type {
>  	QCOM_ICC_QNOC,
>  };
>  
> +/**
> + * struct rpm_clk_resource - RPM bus clock resource
> + * @resource_type: RPM resource type of the clock resource
> + * @clock_id: index of the clock resource of a specific resource type
> + * @branch: whether the resource represents a branch clock
> +*/
> +struct rpm_clk_resource {
> +	u32 resource_type;
> +	u32 clock_id;
> +	bool branch;
> +};
> +
>  #define NUM_BUS_CLKS	2
>  
>  /**
> @@ -47,6 +59,7 @@ struct qcom_icc_provider {
>  	unsigned int qos_offset;
>  	u64 bus_clk_rate[NUM_BUS_CLKS];
>  	struct clk_bulk_data bus_clks[NUM_BUS_CLKS];
> +	const struct rpm_clk_resource *bus_clk_desc;
>  	struct clk_bulk_data *intf_clks;
>  	bool keep_alive;
>  	bool is_on;
> @@ -104,6 +117,7 @@ struct qcom_icc_desc {
>  	struct qcom_icc_node * const *nodes;
>  	size_t num_nodes;
>  	const char * const *bus_clocks;
> +	const struct rpm_clk_resource *bus_clk_desc;
>  	const char * const *intf_clocks;
>  	size_t num_intf_clocks;
>  	bool keep_alive;
> @@ -125,5 +139,6 @@ int qnoc_remove(struct platform_device *pdev);
>  
>  bool qcom_icc_rpm_smd_available(void);
>  int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val);
> +int qcom_icc_rpm_set_bus_rate(const struct rpm_clk_resource *clk, u32 rate, bool set_active);
>  
>  #endif
> diff --git a/drivers/interconnect/qcom/smd-rpm.c b/drivers/interconnect/qcom/smd-rpm.c
> index b0183262ba66..c5ab00051447 100644
> --- a/drivers/interconnect/qcom/smd-rpm.c
> +++ b/drivers/interconnect/qcom/smd-rpm.c
> @@ -16,6 +16,7 @@
>  #include "icc-rpm.h"
>  
>  #define RPM_KEY_BW		0x00007762
> +#define QCOM_RPM_SMD_KEY_RATE	0x007a484b
>  
>  static struct qcom_smd_rpm *icc_smd_rpm;
>  
> @@ -44,6 +45,27 @@ int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val)
>  }
>  EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_send);
>  
> +int qcom_icc_rpm_set_bus_rate(const struct rpm_clk_resource *clk, u32 rate, bool set_active)
> +{
> +	int state = set_active ? QCOM_SMD_RPM_ACTIVE_STATE : QCOM_SMD_RPM_SLEEP_STATE;

Why not just pass in the ctx/state directly as parameter instead of this
boolean? That's what the function directly above does.

Thanks,
Stephan