Re: [PATCH v5 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC

[Bartosz Golaszewski]

On Wed, Jun 7, 2023 at 4:39 PM Jerome Neanne <jneanne@xxxxxxxxxxxx> wrote:
>
> Add support for TPS65219 PMICs GPIO interface.
>
> 3 GPIO pins:
> - GPIO0 only is IO but input mode reserved for MULTI_DEVICE_ENABLE usage.
> - GPIO1 and GPIO2 are Output only and referred as GPO1 and GPO2 in spec.
>
> GPIO0 is statically configured as input or output prior to Linux boot.
> it is used for MULTI_DEVICE_ENABLE function.
> This setting is statically configured by NVM.
> GPIO0 can't be used as a generic GPIO (specification Table 8-34).
> It's either a GPO when MULTI_DEVICE_EN=0 or a GPI when MULTI_DEVICE_EN=1.
>
> Datasheet describes specific usage for non standard GPIO.
>
> Datasheet: https://www.ti.com/lit/ds/symlink/tps65219.pdf
> Co-developed-by: Jonathan Cormier <jcormier@xxxxxxxxxxxxxxxx>
> Signed-off-by: Jonathan Cormier <jcormier@xxxxxxxxxxxxxxxx>
> Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Signed-off-by: Jerome Neanne <jneanne@xxxxxxxxxxxx>
> ---

Applied, thanks!

Bart