Re: [PATCH 2/2] clk: qcom: gcc-msm8996: Use read-only RCG ops for RPM bus clocks

[Stephan Gerhold]

On Mon, Jun 12, 2023 at 01:46:26PM +0200, Konrad Dybcio wrote:
> On 12.06.2023 12:17, Stephan Gerhold wrote:
> > On Mon, Jun 12, 2023 at 11:22:48AM +0200, Konrad Dybcio wrote:
> >> The config/periph/system NoC clocks are wholly controlled by the
> >> RPM firmware and Linux should never ever alter their configuration.
> >>
> >> Switch them over to read-only ops to avoid that.
> >>
> >> Fixes: b1e010c0730a ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver")
> >> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> >> ---
> >>  drivers/clk/qcom/gcc-msm8996.c | 6 +++---
> >>  1 file changed, 3 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c
> >> index 5e44d1bcca9e..588e3b67657a 100644
> >> --- a/drivers/clk/qcom/gcc-msm8996.c
> >> +++ b/drivers/clk/qcom/gcc-msm8996.c
> >> @@ -264,7 +264,7 @@ static struct clk_rcg2 system_noc_clk_src = {
> >>  		.name = "system_noc_clk_src",
> >>  		.parent_data = gcc_xo_gpll0_gpll0_early_div,
> >>  		.num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_early_div),
> >> -		.ops = &clk_rcg2_ops,
> >> +		.ops = &clk_rcg2_ro_ops,
> >>  	},
> >>  };
> >>  
> >> @@ -284,7 +284,7 @@ static struct clk_rcg2 config_noc_clk_src = {
> >>  		.name = "config_noc_clk_src",
> >>  		.parent_data = gcc_xo_gpll0,
> >>  		.num_parents = ARRAY_SIZE(gcc_xo_gpll0),
> >> -		.ops = &clk_rcg2_ops,
> >> +		.ops = &clk_rcg2_ro_ops,
> >>  	},
> >>  };
> >>  
> >> @@ -306,7 +306,7 @@ static struct clk_rcg2 periph_noc_clk_src = {
> >>  		.name = "periph_noc_clk_src",
> >>  		.parent_data = gcc_xo_gpll0,
> >>  		.num_parents = ARRAY_SIZE(gcc_xo_gpll0),
> >> -		.ops = &clk_rcg2_ops,
> >> +		.ops = &clk_rcg2_ro_ops,
> >>  	},
> >>  };
> >>  
> > 
> > If the rcg is read-only then it shouldn't need a .freq_tbl (the
> > .recalc_rate() works without it). These clocks have one for some reason.
> .get_parent needs it
> 

Hm? .get_parent uses the ->parent_map but not the ->freq_tbl as far as I
can see. :)

Stephan