[PATCH 0/3] can: xilinx_can: Add ECC feature support

[Srinivas Goud]

ECC feature added to Tx and Rx FIFO’s for Xilinx CAN Controller.
Part of this feature configuration and counter registers added 
in Xilinx CAN Controller for 1bit/2bit ECC errors count and reset.
Please find more details in PG096 v5.1 document.

xlnx,has-ecc is optional property and added to Xilinx CAN Controller 
node if ECC block enabled in the HW.

Driver reports 1bit/2bit ECC errors for FIFO's based on ECC error interrupts
and also create debugfs entry for reading all the ECC errors.


Srinivas Goud (3):
  dt-bindings: can: xilinx_can: Add ECC property ‘xlnx,has-ecc’
  can: xilinx_can: Add ECC support
  can: xilinx_can: Add debugfs support for ECC

 .../devicetree/bindings/net/can/xilinx,can.yaml    |   5 +
 drivers/net/can/xilinx_can.c                       | 169 ++++++++++++++++++++-
 2 files changed, 169 insertions(+), 5 deletions(-)

-- 
2.1.1