[v4 2/6] arm64: dts: ti: k3-j7200: Configure pinctrl for timer IO pads

[Udit Kumar]

There are timer IO pads in the MCU domain, and in the MAIN domain. These
pads can be muxed for the related timers.

There are timer IO control registers for input and output. The registers
for CTRLMMR_TIMER*_CTRL and CTRLMMR_MCU_TIMER*_CTRL are used to control
the input. The registers for CTCTRLMMR_TIMERIO*_CTRL and
CTRLMMR_MCU_TIMERIO*_CTRL the output.

The multiplexing is documented in TRM "5.1.2.3.1.4 Timer IO Muxing Control
Registers" and "5.1.3.3.1.5 Timer IO Muxing Control Registers", and the
CASCADE_EN bit is documented in TRM "12.6.3.1 Timers Overview".

For chaining timers, the timer IO control registers also have a CASCADE_EN
input bit in the CTRLMMR_TIMER*_CTRL in the registers. The CASCADE_EN bit
muxes the previous timer output, or possibly and external TIMER_IO pad
source, to the input clock of the selected timer instance for odd numered
timers. For the even numbered timers, the CASCADE_EN bit does not do
anything. The timer cascade input routing options are shown in TRM
"Figure 12-3224. Timers Overview". For handling beyond multiplexing, the
driver support for timer cascading should be likely be handled via the
clock framework.

The MCU timer controls are also marked as reserved for
usage by the MCU firmware.

Cc: Nishanth Menon <nm@xxxxxx>
Cc: Vignesh Raghavendra <vigneshr@xxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Reviewed-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Udit Kumar <u-kumar1@xxxxxx>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 18 +++++++++++++++++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 20 +++++++++++++++++++
 2 files changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index c6b15aceea82..a9b3bf8a5c6a 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -392,6 +392,24 @@ cpts@3d000 {
 		};
 	};
 
+	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+	main_timerio_input: pinctrl@104200 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x104200 0x0 0x50>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x000001ff>;
+	};
+
+	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+	main_timerio_output: pinctrl@104280 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x104280 0x0 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000001f>;
+	};
+
 	main_pmx0: pinctrl@11c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index dcb6696cff17..b518ec9eea32 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -183,6 +183,26 @@ chipid@43000014 {
 		reg = <0x00 0x43000014 0x00 0x4>;
 	};
 
+	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+	mcu_timerio_input: pinctrl@40f04200 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04200 0x0 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000F>;
+		status = "reserved";
+	};
+
+	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+	mcu_timerio_output: pinctrl@40f04280 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04280 0x0 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000F>;
+		status = "reserved";
+	};
+
 	wkup_pmx0: pinctrl@4301c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
-- 
2.34.1