Re: [PATCH] i2c: mpc: Use of_property_read_reg() to parse "reg"

[Andi Shyti]

Hi Rob,

On Fri, Jun 09, 2023 at 12:30:44PM -0600, Rob Herring wrote:
> Use the recently added of_property_read_reg() helper to get the
> untranslated "reg" address value.
> 
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-mpc.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
> index cfd074ee6d54..595dce9218ad 100644
> --- a/drivers/i2c/busses/i2c-mpc.c
> +++ b/drivers/i2c/busses/i2c-mpc.c
> @@ -316,9 +316,10 @@ static void mpc_i2c_setup_512x(struct device_node *node,
>  	if (node_ctrl) {
>  		ctrl = of_iomap(node_ctrl, 0);
>  		if (ctrl) {
> +			u64 addr;
>  			/* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */
> -			pval = of_get_property(node, "reg", NULL);
> -			idx = (*pval & 0xff) / 0x20;
> +			of_property_read_reg(node, 0, &addr, NULL);

because of_property_read_reg() can return error, can we check
also the error value here?

Thanks,
Andi

> +			idx = (addr & 0xff) / 0x20;
>  			setbits32(ctrl, 1 << (24 + idx * 2));
>  			iounmap(ctrl);
>  		}
> -- 
> 2.39.2
>