Re: [PATCH v3 2/2] NFC: nxp-nci: Add pad supply voltage pvdd-supply

[Krzysztof Kozlowski]

On 09/06/2023 20:28, Raymond Hackley wrote:
> PN547/553, QN310/330 chips on some devices require a pad supply voltage
> (PVDD). Otherwise, the NFC won't power up.
> 
> Implement support for pad supply voltage pvdd-supply that is enabled by
> the nxp-nci driver so that the regulator gets enabled when needed.
> 
> Signed-off-by: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
> ---
>  drivers/nfc/nxp-nci/i2c.c | 34 ++++++++++++++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
> 
> diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c
> index d4c299be7949..6f01152d2c83 100644
> --- a/drivers/nfc/nxp-nci/i2c.c
> +++ b/drivers/nfc/nxp-nci/i2c.c
> @@ -35,6 +35,7 @@ struct nxp_nci_i2c_phy {
>  
>  	struct gpio_desc *gpiod_en;
>  	struct gpio_desc *gpiod_fw;
> +	struct regulator *pvdd;
>  
>  	int hard_fault; /*
>  			 * < 0 if hardware error occurred (e.g. i2c err)
> @@ -263,6 +264,20 @@ static const struct acpi_gpio_mapping acpi_nxp_nci_gpios[] = {
>  	{ }
>  };
>  
> +static void nxp_nci_i2c_poweroff(void *data)
> +{
> +	struct nxp_nci_i2c_phy *phy = data;
> +	struct device *dev = &phy->i2c_dev->dev;
> +	struct regulator *pvdd = phy->pvdd;
> +	int r;
> +
> +	if (!IS_ERR(pvdd) && regulator_is_enabled(pvdd)) {

No, don't send a new version before we finish discussion. One version
per day is enough.

NAK for this part, same reasons as before.


Best regards,
Krzysztof