Re: [PATCH V6 0/4] Add Genesys Logic GL9767 support

[Ulf Hansson]

On Fri, 9 Jun 2023 at 09:14, Victor Shih <victorshihgli@xxxxxxxxx> wrote:
>
> From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
>
> These patches support for the GL9767 chipset and add support SD3/SD Express
> mode for the GL9767.
>
> Changes in v6 (June. 9, 2023)
> * rebased to the linux-kernel-v6.4.0-rc5 in Ulf Hansson next branch.
> * Patch#2: use usleep_range() to instead msleep() in
>            gl9767_set_pll() function.
> * Patch#4: use usleep_range() to instead msleep() in
>            gl9767_init_sd_express() function.
>
> ----------------- original cover letter from v5 -----------------
> These patches support for the GL9767 chipset and add support SD3/SD Express
> mode for the GL9767.
>
> Changes in v5 (June. 1, 2023)
> * rebased to the linux-kernel-v6.4.0-rc1 in Ulf Hansson next branch.
> * Patch#3: adjust the alignment of definitions.
>
> ----------------- original cover letter from v4 -----------------
> These patches support for the GL9767 chipset and add support SD3/SD Express
> mode for the GL9767.
>
> Changes in v4 (May. 31, 2023)
> * rebased to the linux-kernel-v6.4.0-rc1 in Ulf Hansson next branch.
> * add VDD2 definition for power control-register.
> * Patch#4: use SDHCI_VDD2_POWER_ON to instead SDHCI_POWER_ON in
>            gl9767_init_sd_express() function.
>            use SDHCI_VDD2_POWER_180 to instead SDHCI_POWER_180 in
>            gl9767_init_sd_express() function.
>
> ----------------- original cover letter from v3 -----------------
> These patches support for the GL9767 chipset and add support SD3/SD Express
> mode for the GL9767.
>
> Changes in v3 (May. 31, 2023)
> * rebased to the linux-kernel-v6.4.0-rc1 in Ulf Hansson next branch.
> * Patch#2: use msleep() to instead mdelay().
> * Patch#3: modify the if-else condition and content in
>            gl9767_init_sd_express() function.
>            adjust the order of definitions.
>
> ----------------- original cover letter from v2 -----------------
> These patches support for the GL9767 chipset and add support SD3/SD Express
> mode for the GL9767.
>
> Changes in v2 (May. 30, 2023)
> * rebased to the linux-kernel-v6.4.0-rc1 in Ulf Hansson next branch.
> * Add set SDR104's clock to 205MHz and enable SSC for GL9767.
> * drop export sdhci_check_ro() function.
> * Patch#1: add gl9767_vhs_read() and gl9767_vhs_write().
> * Patch#3: use mmc->ops->get_ro() to instead sdhci_check_ro().
>            use msleep() to instead mdelay().
>            modify the wait time for Power valid to CLKREQ.
>            drop unused definitions.
>
> ----------------- original cover letter from v1 -----------------
> These patches support for the GL9767 chipset and add support SD3/SD Express
> mode for the GL9767.
>
> Changes in v1 (May. 12, 2023)
> * rebased to the linux-kernel-v6.4.0-rc1 in Ulf Hansson next branch.
> * enable MSI interrupt for the GL9767.
> * add support SDR mode for the GL9767.
> * export sdhci_check_ro() function.
> * add support SD Express mode for the GL9767.
>
> Victor Shih (4):
>   mmc: sdhci-pci-gli: Add Genesys Logic GL9767 support
>   mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for
>     GL9767
>   mmc: sdhci: Add VDD2 definition for power control register
>   mmc: sdhci-pci-gli: Add support SD Express card for GL9767
>
>  drivers/mmc/host/sdhci-pci-core.c |   1 +
>  drivers/mmc/host/sdhci-pci-gli.c  | 406 ++++++++++++++++++++++++++++++
>  drivers/mmc/host/sdhci-pci.h      |   2 +
>  drivers/mmc/host/sdhci.h          |   7 +
>  4 files changed, 416 insertions(+)
>

Applied for next, thanks!

Kind regards
Uffe