Re: [PATCH 3/4] mips: ingenic: Enable EXT/2 divider on JZ4750/55/60 if EXT is 24 MHz

[Thomas Bogendoerfer]

On Sun, Jun 04, 2023 at 02:26:54PM +0200, Paul Cercueil wrote:
> The JZ4750, JZ4755 and JZ4760 (non-B version) support using a 24 MHz
> external crystal oscillator instead of the typical 12 MHz one.
> 
> However, most of the SoC's IP blocks only work with a 12 MHz clock.
> Thanksfully, there is a /2 divider we can enable when a 24 MHz external
> crystal is present.
> 
> Force-enable this /2 divider when the oscillator is 24 MHz, so that the
> SoC always uses a 12 MHz clock internally.
> 
> It is done here, and not in the clocks driver, because we need the EXT
> clock to be 12 MHz for the early console to work, and the clocks driver
> probes way too late.
> 
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> ---
>  arch/mips/generic/board-ingenic.c | 57 +++++++++++++++++++++++++++++++
>  1 file changed, 57 insertions(+)

applied to mips-next.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]