[PATCH] arm64: dts: qcom: ipq9574: enable the SPI NOR support in RDP433

[Kathiravan T]

RDP433 has the support for SPI NOR, add the support for it.

Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
---
Note: This patch was part of initial submission
https://lore.kernel.org/linux-arm-msm/20230329053726.14860-1-quic_kathirav@xxxxxxxxxxx/
however this got missed in between, so sending it across again.

 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 2b3ed8d351f7..31ee19112157 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -48,6 +48,20 @@
 	};
 };
 
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
 &sdhc_1 {
 	pinctrl-0 = <&sdc_default_state>;
 	pinctrl-names = "default";
@@ -96,6 +110,13 @@
 			bias-pull-down;
 		};
 	};
+
+	spi_0_pins: spi-0-state {
+		pins = "gpio11", "gpio12", "gpio13", "gpio14";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-disable;
+	};
 };
 
 &xo_board_clk {
-- 
2.17.1