Re: [PATCH v6 00/10 RESEND] Add RT5033 charger device driver

[Lee Jones]

On Mon, 15 May 2023, Jakob Hauser wrote:

> This patchset adds the charger driver "rt5033-charger". It is part of the
> multifunction device rt5033. The patchset is based on an older version by
> Beomho Seo of March 2015. For more information on the history and setup of
> the patchset see the cover sheet of version v1, there is a link further down
> below the changelog.
> 
> RESEND: Sorry for spamming. The first try of sending v6 got interrupted and
> was split into two threads on the lore list. Therefore sending it again.
> 
> Changes in v6:
>  - Patch 5: In function rt5033_charger_probe() after
>    calling rt5033_charger_dt_init() replaced the return value from "-ENODEV"
>    to "PTR_ERR(charger->chg)", as suggested by Christophe.
>  - Patch 9: Changed the patch from adding "power-supplies: true" to replacing
>    "additionalProperties: false" by "unevaluatedProperties: false", as
>    suggested by Krzysztof.
> 
> v1: https://lore.kernel.org/linux-pm/cover.1677620677.git.jahau@xxxxxxxxxxxxxx/T/#t
> v2: https://lore.kernel.org/linux-pm/cover.1681646904.git.jahau@xxxxxxxxxxxxxx/T/#t
> v3: https://lore.kernel.org/linux-pm/cover.1682636929.git.jahau@xxxxxxxxxxxxxx/T/#t
> v4: https://lore.kernel.org/linux-pm/20230506155435.3005-1-jahau@xxxxxxxxxxxxxx/T/#t
> v5: https://lore.kernel.org/linux-pm/20230514123130.41172-1-jahau@xxxxxxxxxxxxxx/T/#t
> 
> The result of the patchset v6 can be seen at:
> https://github.com/Jakko3/linux/blob/rt5033-charger_v6/drivers/power/supply/rt5033_charger.c
> 
> Jakob Hauser (9):
>   mfd: rt5033: Fix chip revision readout
>   mfd: rt5033: Fix STAT_MASK, HZ_MASK and AICR defines
>   mfd: rt5033: Apply preparatory changes before adding rt5033-charger
>     driver
>   power: supply: rt5033_charger: Add RT5033 charger device driver
>   power: supply: rt5033_charger: Add cable detection and USB OTG supply
>   power: supply: rt5033_battery: Move struct rt5033_battery to battery
>     driver
>   power: supply: rt5033_battery: Adopt status property from charger
>   dt-bindings: power: supply: rt5033-battery: Apply
>     unevaluatedProperties
>   dt-bindings: Add rt5033 mfd, regulator and charger
> 
> Stephan Gerhold (1):
>   mfd: rt5033: Drop rt5033-battery sub-device
> 
>  .../bindings/mfd/richtek,rt5033.yaml          | 138 ++++
>  .../power/supply/richtek,rt5033-battery.yaml  |   2 +-
>  .../power/supply/richtek,rt5033-charger.yaml  |  65 ++
>  drivers/mfd/rt5033.c                          |   8 +-
>  drivers/power/supply/Kconfig                  |   8 +
>  drivers/power/supply/Makefile                 |   1 +
>  drivers/power/supply/rt5033_battery.c         |  38 +-
>  drivers/power/supply/rt5033_charger.c         | 744 ++++++++++++++++++
>  include/linux/mfd/rt5033-private.h            |  64 +-
>  include/linux/mfd/rt5033.h                    |  24 -
>  10 files changed, 1034 insertions(+), 58 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
>  create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
>  create mode 100644 drivers/power/supply/rt5033_charger.c

All applied.  Sent for build testing.

I'll follow-up with a PR soon.

-- 
Lee Jones [李琼斯]